NieNie 6683, 5552

Contents

NieNie Digital Alarm Clock User Manual

Models: 6683, 5552

1. Introduction

Thank you for purchasing the NieNie Digital Alarm Clock. This clock features a clear LED display, multiple display modes, temperature display, week and date display, dual alarms, snooze function, adjustable brightness, and a mood light. This manual will guide you through the setup, operation, and maintenance of your new alarm clock.

NieNie Digital Alarm Clock on a bedside table with green display

Figure 1: NieNie Digital Alarm Clock in a typical setting.

2. Package Contents

  • NieNie Digital Alarm Clock
  • USB Power Cable
  • User Manual (this document)

3. Product Overview

Familiarize yourself with the clock's components and controls.

Back view of the alarm clock showing buttons, USB port, and battery compartment

Figure 2: Rear view of the alarm clock with key features labeled.

Controls and Ports:

  • ALARM Button: Used to set and activate/deactivate Alarm 1 and Alarm 2.
  • SET Button: Used to enter setting modes for time, date, week, 12/24H format, temperature unit, and DST.
  • + Button: Used to increase values during settings, switch display modes, and activate/deactivate DST.
  • - Button: Used to decrease values during settings, turn on/off mood light, and activate/deactivate sleep mode.
  • LIGHT/SNOOZE Button (Top): Used to adjust main display brightness and activate snooze during an alarm.
  • USB Power Port: For continuous power supply.
  • Battery Compartment: For 3x AAA batteries (not included) for backup power.
  • Bottom Mood Light: Provides ambient lighting.

4. Setup

  1. Power Supply:
    • USB Power (Recommended): Connect the provided USB cable to the clock's USB port and plug the other end into a USB power adapter (not included) or a powered USB port. The clock display will be continuously on.
    • Battery Power (Backup): Open the battery compartment on the back and insert 3 AAA batteries (not included), observing polarity. When powered by batteries only, the screen will turn off after 5-10 seconds to save power. Press any button to wake the screen for 5-10 seconds.
  2. Initial Power On: Once powered, the clock will display default time and settings.

5. Operating Instructions

5.1 Setting Time, Date, and Week

  1. Press and hold the SET button for 3 seconds to enter time setting mode. The Year will start flashing.
  2. Use the + or - buttons to adjust the Year.
  3. Press SET to confirm and move to the next setting (Month, Day, 12/24H format, Hour, Minute, Week).
  4. Repeat steps 2 and 3 for each parameter.
  5. After setting the Week, press SET again to exit the setting mode.

5.2 Setting Alarms

The clock has two independent alarms (Alarm 1 and Alarm 2).

  1. Press the ALARM button repeatedly to select Alarm 1 or Alarm 2 (indicated by the corresponding icon flashing).
  2. While the desired alarm icon is flashing, press and hold the SET button for 3 seconds to enter alarm time setting mode. The Hour will start flashing.
  3. Use the + or - buttons to adjust the Hour.
  4. Press SET to confirm and move to Minute setting.
  5. Use the + or - buttons to adjust the Minute.
  6. Press SET again to confirm and exit alarm time setting.
  7. To activate or deactivate an alarm, press the ALARM button until the desired alarm icon (e.g., Alarm 1 icon or Alarm 2 icon) appears or disappears on the display.

5.3 Snooze Function

When an alarm sounds:

  • Press the LIGHT/SNOOZE button (on top) to activate snooze. The alarm will pause for 5 minutes and then sound again.
  • Press any other button (ALARM, SET, +, -) to stop the alarm completely until the next set time.

5.4 Adjusting Display Brightness

The main display has 3 brightness levels.

Alarm clock showing 3 levels of display brightness

Figure 3: 3-level brightness adjustment for the main display.

  • Press the LIGHT/SNOOZE button (on top) repeatedly to cycle through brightness levels: L01 (Low), L02 (Medium), L03 (High).

5.5 Adjusting Mood Light (Ambient Light)

The bottom mood light has adjustable brightness and a sleep mode.

Alarm clock showing mood light settings: Off, Low, Medium, Sleep Mode

Figure 4: Mood light settings including sleep mode.

  • Press the - button repeatedly to cycle through mood light settings: 00 (Off), 01 (Low Brightness), 02 (Medium Brightness), SL (Sleep Mode).
  • In Sleep Mode (SL), the mood light will automatically turn off after 30 minutes.

5.6 Display Modes

The clock offers two main display modes.

Alarm clock showing two display modes: fixed and cycling

Figure 5: Illustration of the two available display modes.

  • Press the + button to switch between display modes:
  • Mode 1: Time + Temperature + Week (displayed simultaneously on the same screen).
  • Mode 2: Cycle display (alternates between 'Time + Temperature + Week' and 'Time + Temperature + Date').

5.7 Temperature Unit (°C/°F)

  • Press the SET button repeatedly until the temperature unit (°C or °F) starts flashing.
  • Use the + or - buttons to switch between Celsius (°C) and Fahrenheit (°F).
  • Press SET to confirm and exit.

5.8 Daylight Saving Time (DST)

  • Press and hold the + button for 3 seconds to activate or deactivate DST.
  • When DST is active, the

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.