1. Introduction
Thank you for choosing the RUNTOIN Ultrathin LED Ceiling Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and keep it for future reference.

Image 1.1: RUNTOIN Ultrathin LED Ceiling Light (Black and White variants)
2. Safety Instructions
WARNING: Risk of Electric Shock. Installation must be performed by a qualified electrician or a person with adequate electrical knowledge.
- Always turn off the main power supply at the circuit breaker before beginning installation, cleaning, or maintenance.
- Ensure the voltage rating of the fixture matches your power supply (110V or 220V).
- Do not install the fixture on a wet surface or in direct contact with water.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create safety hazards.
- Keep children away from the installation area.
- Ensure all connections are secure and properly insulated.
3. Package Contents
Please check the package for the following items:
- 1 x RUNTOIN Ultrathin LED Ceiling Light Fixture
- 1 x Mounting Bracket
- Mounting Screws and Wall Anchors (if applicable)
- User Manual (this document)
4. Setup and Installation
Follow these steps carefully to install your ceiling light. Refer to the installation diagram for visual guidance.

Image 4.1: Installation Diagram
- Turn Off Power: Before installation, please turn off your main power supply at the circuit breaker.
- Remove Mounting Bracket: Counterclockwise twist the back plate to take off the mounting bracket from the light fixture.
- Fix Mounting Bracket: Screw and fix the mounting bracket to the ceiling. Ensure it is securely fastened. (Install the bracket beside the power cable).
- Connect Wires: Press and snap in the wires N (Neutral) and L (Live) into the terminal block on the fixture. This fixture is double insulated, so it does not require an earth wire connection.
- Mount the Lamp: Align the lamp with the position of the back plate bracket on the ceiling. Mount the lamp by pushing it up and then clockwise twist it until it is fully secured and locked into place.
- Restore Power: Turn on the main power supply at the circuit breaker and then turn on the light switch to test the fixture. Ensure the lamp is twisted to the end for normal use.
5. Operating Instructions
The RUNTOIN Ultrathin LED Ceiling Light is designed for simple operation:
- Once installed and powered, use your standard wall light switch to turn the light ON or OFF.
- The light provides consistent illumination (Warm light or White light, depending on your model).

Image 5.1: Warm Light vs. White Light Illumination

Image 5.2: Eye-Caring Technology for comfortable soft light.
6. Maintenance
- Cleaning: Ensure the power is off before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Dustproof Design: The fixture features a sealed design to prevent dust and insects from entering, reducing the need for frequent internal cleaning.

Image 6.1: Dustproof and Waterproof Design
7. Troubleshooting
If you encounter issues with your ceiling light, try the following solutions:
- Light Does Not Turn On:
- Check if the main power supply is on at the circuit breaker.
- Ensure the wall switch is in the ON position.
- Verify that the wires are correctly and securely connected to the fixture's terminal block.
- Confirm the lamp is fully twisted and secured into the mounting bracket.
- Light Flickers:
- Ensure all electrical connections are tight.
- Check for any loose wiring in the wall switch or junction box.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | RUNTOIN |
| Item Type | Ceiling Lights |
| Model Variants | 28W, 40W |
| Body Color Options | White, Black |
| Light Color Options | Warm Light, White Light |
| Voltage | 90 - 260 V AC |
| Light Source | LED Bulbs (Included) |
| Luminous Flux | 249-2000 Lumens |
| Is Dimmable | No |
| Is Smart Device | No |
| Installation Method | Surface Mounted, Self-contained |
| Body Material | PC, Ironware + Acrylic |
| Lighting Area | 3-5 square meters |
| Typical Dimensions (approx.) | Length: 40cm, Width: 40cm, Height: 7cm (for 40W model) |
| Weight (approx.) | 0.4 kg |
| Certifications | CCC, CE, CQC, EMC, FCC, GS, LVD, PSE, ROHS, SAA, UL, VDE, EAC |
| Application | Kitchen, Dining Room, Bedroom, Foyer, Study, Bathroom, Exhibition Hall, Corridor, Balcony |

Image 8.1: Premium Craftsmanship and Simple Design Frame
9. User Tips
- This light provides very bright illumination, which is excellent for general room lighting or when you need to clearly see objects in the room.
- Its ultrathin, low-profile design makes it suitable for rooms with lower ceilings or where a minimalist aesthetic is desired.
- The lightweight nature of the fixture allows for easy mounting directly onto plasterboard ceilings without requiring extensive reinforcement.
10. Warranty and Support
Your RUNTOIN Ultrathin LED Ceiling Light is covered by a manufacturer's warranty. For specific warranty details, support, or service inquiries, please refer to the seller's information or contact the point of purchase. Please have your purchase details ready when contacting support.
A PDF version of this user manual may be available for download. Please check the product page or contact the seller for the link: User Manual (PDF)