HOMEFISH Mini LED Reading Book Light

Contents

Mini LED Reading Book Light User Manual

Model: Mini LED Reading Book Light

1. Introduction

Thank you for purchasing the Mini LED Reading Book Light. This compact and versatile light is designed to provide comfortable illumination for reading, studying, and other tasks, while protecting your eyes. Its clip-on and standable design, along with adjustable brightness and color temperature, makes it ideal for various environments.

2. Safety Information

  • Do not expose this product to rain or moisture.
  • Keep away from flammable and explosive materials, especially when charging.
  • It is recommended that charging time does not exceed 24 hours.
  • The light source of this lamp is non-replaceable. When the light source reaches the end of its life, the entire lamp should be replaced.
  • Do not leave the product unused for extended periods. If not used frequently, charge it every three months to maintain battery life.

3. Package Contents

  • 1 x Mini LED Reading Book Light
  • 1 x USB Type-C Charging Cable

4. Setup

4.1. Charging the Device

Before first use, fully charge the book light. Use a 5V1A mobile phone charger or any standard USB port (e.g., computer, power bank) with the provided Type-C cable.

  1. Connect the Type-C end of the charging cable to the lamp's charging port.
  2. Connect the USB-A end to a suitable power source.
  3. During charging, the indicator light will be red.
  4. The indicator light will turn off automatically when fully charged.

Important: If the light becomes dim during use, it indicates a low battery. Stop using it and charge it promptly to prevent battery damage.

Charging options for the book light

Figure 4.1: Charging options including computer, power bank, and wall socket.

4.2. Positioning the Light

The book light features a strong clip and a flexible arm, allowing for versatile positioning:

  • Clip-on: Attach the clip to books, e-readers, tables, shelves, or other surfaces up to 10mm thick.
  • Standable: The base of the clip allows the light to stand independently on a flat surface.
Book light clipped to a shelf and standing on a desk

Figure 4.2: Demonstrates the light's ability to clip onto shelves and stand on a desk.

Close-up of the book light clipped to a book with its flexible arm

Figure 4.3: The freely adjustable lamp arm allows precise light positioning.

5. Operating Instructions

5.1. Power On/Off and Color Temperature Adjustment

The lamp head features a touch-sensitive switch:

  1. Press once: Turns on the light to White Light mode.
  2. Press twice: Switches to Warm Light mode.
  3. Press three times: Switches to Natural Light mode.
  4. Press four times: Turns off the light.
Diagram showing three color temperature modes and how to switch between them

Figure 5.1: Three levels of color temperature can be switched by pressing the button.

5.2. Brightness Adjustment

To adjust the brightness:

  • When the light is on, long press the switch at the lamp head.
  • The brightness will cycle from minimum to maximum. Release your finger when the desired brightness is reached.
  • The product has a brightness memory function, meaning it will turn on at the last used brightness level. Long press again to reset brightness.

6. Maintenance

  • Cleaning: Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Storage: If the lamp will not be used for an extended period, ensure it is fully charged and then recharge it every three months to preserve battery life.
  • Battery Care: Always charge the battery promptly when it runs low. Do not attempt to replace the built-in battery.

7. Troubleshooting

  • Light is dim or not turning on: The battery may be fully discharged. Please charge the device.
  • Light source not working: The LED light source is non-replaceable. If the light source fails, the entire lamp unit must be replaced.
  • Charging indicator not working: Ensure the charging cable is properly connected to both the lamp and the power source.

8. Specifications

Product NameMini LED Reading Book Light
BrandHOMEFISH
Input Voltage/Current5V / 1A
Power0.5W
MaterialABS + Electronic Components
Luminous Flux60-249 Lumens
Power SourceRechargeable Battery
Batteries IncludedYes
Product WeightApprox. 53g
Executive StandardGB7000.1-2015, GB7000.204-2008

9. User Tips

  • Many users find this light very useful and bright despite its small size.
  • Consider purchasing multiple units for different locations or as gifts.
  • The compact size makes it highly portable for travel.

10. Warranty and Support

For warranty claims or technical support, please contact the seller or retailer from whom you purchased this product. Keep your proof of purchase for any warranty-related inquiries.

© 2024 HOMEFISH. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.