Introduction
This manual provides detailed instructions for the proper use and maintenance of your SWEVY SW80S/SW85S Industrial Alcohol Concentration Meter. This device is designed for high-precision measurement of ethanol/alcohol volume ratio, particularly suitable for the white spirit brewing industry, disinfection fields, and research laboratories.

Figure 1: SWEVY SW80S Alcohol Meter (0-80% range)

Figure 2: SWEVY SW85S Alcohol Meter (Dual-Range Model)
Key Features
- High Precision: Measurement accuracy of ±2%.
- IP67 Waterproof Body: Designed to work reliably in humid and harsh environments.
- Dual-Range Design (SW85S): Offers measurement ranges of 0-80% and 90-100% for comprehensive analysis.
- High Precision Metal Sample Cell: Ensures reliable and accurate results.
- Automatic Temperature Compensation: Reduces measurement errors caused by temperature differences.
- One-Click Zeroing: Easy calibration for consistent accuracy.
- Automatic Shutdown: Conserves battery life.
- LCD Display: High-definition display showing three data points simultaneously.
- Language Switch: Can switch between Chinese and English languages.

Figure 3: Six Superior Qualities of the Alcohol Meter
Parts Identification
Familiarize yourself with the components of your alcohol concentration meter:

Figure 4: Key Introduction and Dimensions
- Optical Prism: The surface where the sample is placed.
- Measurement Slot: Area for dropping the liquid sample.
- Display Screen: LCD for showing measurement results and status.
- ON/OFF Key: Powers the device on or off.
- Zero Reset Button (清零 Zero): Used for calibration.
- Measuring Key (测量 Meas): Initiates a measurement.
- Battery Compartment: Houses 2xAAA batteries (not included).
- USB Charging Interface: For charging the device.
Setup
1. Battery Installation
The device requires 2xAAA batteries (not included). Open the battery compartment and insert the batteries, ensuring correct polarity.
2. Initial Zero-Setting (Calibration)
Before first use or if accuracy is in doubt, perform a zero-setting calibration using clean water or pure water.
- Ensure the measuring slot is clean and dry.
- Drop about 0.3ml of clean water or pure water into the measuring slot, ensuring it covers the top of the measuring slot (approx. 1mm depth).
- Press the