CETANT PL230

Contents

CETANT PL230 50CM LED Rechargeable Wall Light User Manual

Model: PL230 (also referred to as WLX189)

Thank you for choosing the CETANT LED Rechargeable Wall Light. Please read this manual carefully before installation and use to ensure proper operation and safety.

1. Introduction

The CETANT PL230 is a modern, rechargeable LED wall light designed for versatile indoor use. Featuring a magnetic installation system, it offers easy setup without the need for complex wiring. The lamp provides stepless dimming and adjustable color temperature, controlled via a remote or a built-in pushbutton, allowing you to create the perfect ambiance for any space.

Gold CETANT PL230 LED Rechargeable Wall Light with remote control and USB cable

Figure 1: CETANT PL230 LED Rechargeable Wall Light (Gold version)

2. Safety Information

  • Always check all parts and accessories before beginning installation.
  • If performing any installation near existing electrical wiring, ensure the power supply is cut off or the main circuit breaker is closed to prevent electrical shock.
  • Do not install or use the lamp in flammable or humid environments. This product is not water-resistant.
  • Keep the lamp away from direct heat sources and open flames.
  • Do not attempt to disassemble or modify the lamp beyond the instructions provided.
  • This product is intended for indoor use only.

3. Package Contents

Please verify that all items are present in your package:

  • 1 x LED Rechargeable Wall Light Unit
  • 1 x Remote Control
  • 1 x USB Type-C Charging Cable
  • 1 x Magnetic Base Plate (with pre-applied adhesive)
  • 2 x Screws
  • 2 x Wall Plugs
Diagram showing 50cm lamp dimensions, magnetic wall lamp components including magnetic base, adhesive, remote, and USB cable.

Figure 2: Package contents and lamp dimensions (50cm length, 100mm diameter base)

4. Specifications

Feature Specification
Model NumberPL230 (WLX189)
Working Power5W
MaterialAluminum, Iron
Charger Voltage5V (DC)
Battery Capacity4000mAh
Luminous Flux249-2000 lumens
Color Temperature3000K (Warm), 4000K (Natural), 6000K (White)
Dimming Range10% - 100% (Stepless)
Installation MethodSelf-contained (Magnetic/Adhesive or Wall Mounted)
Lighting Area5-10 square meters
Light SourceIntegrated LED bulbs (> 20 light sources)
Control TypeRemote Control, Pushbutton Control
Voltage90 - 260 V (for charging adapter, not direct lamp power)
Water Resistance LevelNo water resistant
Warranty2 years
CertificationsCCC, CE, PSE, ROHS
Package Dimensions51cm (L) x 12cm (W) x 6cm (H)
Package Weight0.567 kg

5. Setup and Installation

The CETANT PL230 offers two primary installation methods: magnetic/adhesive for non-permanent placement or drilled for a more secure, permanent fixture.

5.1 Method 1: Magnetic/Adhesive Installation (No Drilling Required)

This method is ideal for smooth, clean surfaces where drilling is not desired.

  1. Choose a clean, dry, and smooth surface on your wall for installation.
  2. Peel off the protective film from the adhesive backing of the magnetic base plate.
  3. Firmly press the magnetic base plate onto the chosen wall location for at least 30 seconds to ensure strong adhesion.
  4. Once the base plate is securely attached, the wall light unit can be magnetically attached to it.
  5. The lamp can be rotated 360 degrees on the magnetic base to adjust the light direction as desired.
Diagram illustrating 360-degree DIY installation and the removable magnetic backplate.

Figure 3: Magnetic installation and 360-degree rotation capability

5.2 Method 2: Drilled Installation (for permanent fixture)

For a more robust and permanent installation, follow these steps:

  1. Determine the precise location on the wall where you want to install the lamp. Mark the spot for drilling.
  2. Drill a hole at the marked location.
  3. Insert a wall plug into the drilled hole. If necessary, gently tap it with a hammer until it is flush with the wall surface.
  4. Align the magnetic base plate with the drilled hole and use a screwdriver to secure it to the wall with the provided screw.
  5. Once the base plate is firmly attached, the wall light unit can be magnetically attached to it.
Step-by-step diagram for drilled installation, showing marking, drilling, inserting plugs, and screwing the base plate.

Figure 4: Drilled installation procedure

6. Operating Instructions

6.1 Initial Use

Before using the remote control for the first time, please ensure to remove any insulation paper or plastic tab from the battery compartment.

6.2 Remote Control Operation

The included remote control provides full functionality for your wall light:

Image detailing dimmable wall sconce features, including 3 color temperatures (3000K, 4000K, 6000K) and 10-100% dimming, along with a remote control diagram showing buttons for power, CCT, brightness, and timer.

Figure 5: Remote control functions and light settings

  • Turn On/Off: Press the ON/OFF button to switch the light on or off.
  • Color Temperature (CCT) Adjustment: Use the CCT buttons (e.g., sun icon for warm, snowflake for cool) to cycle through 3000K (Warm light), 4000K (Natural light), and 6000K (White light).
  • Brightness Adjustment: Use the +/- buttons to increase or decrease the brightness from 10% to 100% (stepless dimming).
  • Delay Off Timer: Press the 15, 30, or 60 minute buttons to set an automatic turn-off timer. The light will turn off after the selected duration. Press any other button on the remote to cancel the timer.

6.3 Pushbutton Control (on lamp)

The lamp also features a discreet pushbutton for basic control:

  • Short Press: A short press of the pushbutton will turn the light on/off and cycle through the available color temperatures (3000K, 4000K, 6000K).
  • Long Press: A long press of the pushbutton will adjust the brightness, allowing you to dim or brighten the light steplessly.

Video 1: Demonstration of magnetic design, remote control, and pushbutton control features.

7. Charging

The CETANT PL230 wall light is equipped with a built-in 4000mAh rechargeable battery.

  1. Locate the Type-C charging port on the base of the lamp.
  2. Connect the provided USB Type-C charging cable to the lamp's port.
  3. Connect the other end of the USB cable to a standard 5V USB power adapter (not included) or a compatible USB port.
  4. A charging indicator light (usually red) will illuminate during charging and typically change color (e.g., green) when fully charged.
Close-up view of the lamp's base, showing the Type-C charging port and mounting screw.

Figure 6: Type-C charging port on the lamp base

8. Maintenance

  • Cleaning: To clean the lamp, gently wipe it with a soft, dry cloth. Do not use liquid cleaners, abrasive materials, or chemical solvents, as these may damage the finish or electronic components.
  • Storage: If storing the lamp for an extended period, ensure it is fully charged and store it in a cool, dry place. Recharge periodically to maintain battery health.
  • Battery Care: Avoid completely draining the battery frequently to prolong its lifespan.

9. Troubleshooting

Problem Possible Cause Solution
Lamp does not turn on. Battery is depleted. Charge the lamp using the provided USB Type-C cable.
Remote control battery is dead or insulation tab not removed. Replace the remote control battery or remove the insulation tab.
Remote control is not responding. Remote control battery is dead or insulation tab not removed. Replace the remote control battery or remove the insulation tab.
Obstruction between remote and lamp. Ensure a clear line of sight between the remote and the lamp.
Light flickers or is dim. Low battery. Recharge the lamp.

10. User Tips

  • This wall light is excellent for creating a cozy and relaxing atmosphere, especially in bedrooms or living rooms, due to its soft and pleasant light.
  • The modern and elegant design makes it appear more expensive than its actual cost, adding a touch of sophistication to your decor.
  • The product is typically sold as a single unit. If you require multiple lamps for a specific setup, please ensure to order the correct quantity.
Black CETANT PL230 LED Rechargeable Wall Light installed above a bed, showcasing its use as a bedside lamp.

Figure 7: Wall light used as a bedside lamp

11. Warranty and Support

This CETANT PL230 LED Rechargeable Wall Light comes with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact the seller or retailer from whom you purchased the product.

A PDF user manual may be available for download from the seller's product page for additional details and language options. (e.g., View User Manual PDF)

12. Environmental Disposal

This product contains a rechargeable battery and electronic components. To protect the environment, do not dispose of this product with general household waste at the end of its life cycle. Please take it to an authorized collection point for the recycling of electrical and electronic equipment (WEEE) in accordance with local regulations.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.