TUMMASTER LJ-7pro

Contents

TUMMASTER PRISM 7 PRO 120mm ARGB Computer Case Fan

Model: LJ-7pro

User Instruction Manual

1. Introduction

Thank you for choosing the TUMMASTER PRISM 7 PRO 120mm ARGB Computer Case Fan. This fan is designed to provide efficient cooling for your computer system while offering vibrant addressable RGB lighting effects. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your fan.

2. Safety Information

  • Ensure your computer system is powered off and unplugged from the wall outlet before installation.
  • Handle the fan by its frame to avoid damaging the blades or wiring.
  • Do not attempt to open or modify the fan. This may void the warranty and cause damage.
  • Keep the fan away from liquids and excessive moisture.
  • Ensure proper ventilation during operation to prevent overheating of components.
  • If any issues arise, refer to the troubleshooting section or contact customer support.

3. Package Contents

Verify that all components are present in your package:

  • TUMMASTER PRISM 7 PRO 120mm ARGB Fan(s)
  • Mounting Screws
  • (Optional, depending on package) ARGB Controller / Hub

4. Specifications

Feature Specification
Model Number LJ-7pro
Brand Name TUMMASTER
Series prisms
Fan Size 120mm x 120mm x 25mm
Voltage 12V DC
Rated Current 0.25A
Power (W) 3W
Fan Speed 800 - 1800 RPM (±10%)
Air Volume 58.36 CFM (±10%)
Noise Level ~28dBA
Bearing Type Fluid Bearing
Fan Life 40,000 hrs
Blade Quantity 9
Power Interface 12V 4-Pin PWM
Lighting Type ARGB (5V 3-Pin)
Used For Radiator, Computer Case Cooling
Origin Mainland China

Diagram showing fan dimensions: 120mm length, 120mm width, 25mm thickness. Figure 4.1: Fan Dimensions (120mm x 120mm x 25mm)

Diagram illustrating fan performance: Fan speed 800-1600RPM ±10%, Fan Pressure 1.6mm H2O ±10%, Noise 6-28dBA. Figure 4.2: Fan Performance Metrics

Detailed specifications for a single Prism 7 PRO Forward Fan, including fan speed, rating, rated voltage, rated current, maximum noise, lighting type, fan size, and maximum airflow. Figure 4.3: Detailed Specifications for 1PCS Forward Fan

5. Setup Instructions

5.1. Fan Orientation (Forward vs. Reverse)

The PRISM 7 PRO fans are available in both 'Forward' and 'Reverse' airflow designs. The 'Forward' fan pushes air in the direction of the fan's front (where the RGB ring is most visible), while the 'Reverse' fan pulls air from the front. Ensure you select the correct fan orientation for your desired airflow path within your PC case.

Image showing two fans, one white and one black, illustrating 'Forward + Reverse Design' with arrows indicating airflow direction. Figure 5.1: Forward and Reverse Fan Designs

5.2. Physical Installation

  1. Identify the desired mounting location(s) for your fan(s) within your PC case (e.g., front, top, rear, bottom, or on a radiator).
  2. Align the fan with the screw holes on the case or radiator.
  3. Secure the fan using the provided mounting screws. Tighten them firmly but do not overtighten to avoid stripping the threads or damaging the fan frame.

5.3. Wiring Connections

The fan requires two separate connections: one for power/PWM control and one for ARGB lighting.

Wiring diagram showing connections for fan power and ARGB lighting. Fan power uses a 4-pin connector in series to a motherboard FAN interface. ARGB lighting uses a 5V 3-pin connector in series to a motherboard ADD_HEADER. Figure 5.2: Fan Power and Lighting Connection Diagram

5.3.1. Fan Power Connection (PWM)

  1. Locate the 4-Pin fan connector from the PRISM 7 PRO fan.
  2. If installing multiple fans, connect the 4-Pin male connector of one fan to the 4-Pin female connector of the next fan in series.
  3. Connect the final 4-Pin male connector in the series (or the single fan's 4-Pin male connector) to an available 4-Pin FAN header on your motherboard. This allows for PWM (Pulse Width Modulation) control of fan speed.

5.3.2. Lighting Power Supply Connection (ARGB)

  1. Locate the 5V 3-Pin ARGB connector from the PRISM 7 PRO fan.
  2. If installing multiple fans, connect the 5V 3-Pin male connector of one fan to the 5V 3-Pin female connector of the next fan in series. Up to 5 fans can typically be daisy-chained in this manner.
  3. To connect the series to the motherboard, remove the protective sleeve from the male end of the ARGB cable. Connect this male end to the female end of the first fan in the series.
  4. Connect the 5V 3-Pin female connector of the first fan in the series to an available 5V 3-Pin ARGB header (often labeled 'ADD_HEADER' or 'D_LED') on your motherboard.
  5. Important: Ensure you connect to a 5V 3-Pin ARGB header. Connecting to a 12V 4-Pin RGB header will damage the LEDs.

6. Operating Instructions

6.1. Fan Speed Control (PWM)

The 4-Pin PWM connector allows your motherboard to dynamically control the fan speed based on system temperature. This can be configured through your motherboard's BIOS/UEFI settings or through software provided by your motherboard manufacturer.

  • BIOS/UEFI: Access your motherboard's BIOS/UEFI during startup (usually by pressing DEL or F2). Navigate to the fan control section to set custom fan curves or select predefined profiles (e.g., Silent, Standard, Performance).
  • Software: Many motherboard manufacturers offer desktop applications (e.g., ASUS AI Suite, MSI Dragon Center, Gigabyte SIV) that allow for real-time fan speed adjustments within your operating system.

6.2. ARGB Lighting Control

The 5V 3-Pin ARGB connector allows for addressable RGB lighting control, meaning each LED can be controlled individually for complex lighting effects. This is typically controlled via your motherboard's ARGB software.

  • Motherboard Software: Use your motherboard's dedicated ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) to customize lighting effects, colors, and synchronization with other ARGB components.
  • ARGB Controller (if applicable): If your fan package included a standalone ARGB controller or if you are using a third-party controller, refer to its specific instructions for lighting control.

A computer case interior showcasing multiple PRISM 7 PRO fans with vibrant, synchronized ARGB lighting, creating an immersive visual experience. Figure 6.1: Example of ARGB Lighting Effects in a PC Case

7. Maintenance

  • Cleaning: Periodically clean the fan blades and frame to remove dust buildup. Use a can of compressed air or a soft, dry cloth. Ensure the fan is powered off and unplugged before cleaning.
  • Inspection: Regularly inspect the fan for any signs of damage, loose connections, or unusual noises.
  • Avoid Lubrication: The fluid bearing is designed for long-term, maintenance-free operation. Do not attempt to lubricate the fan bearing.

8. Troubleshooting

  • Fan Not Spinning:
    • Check if the 4-Pin PWM connector is securely plugged into the motherboard's FAN header.
    • Ensure the motherboard's fan header is enabled in BIOS/UEFI.
    • Verify that the power supply is functioning correctly.
  • No ARGB Lighting:
    • Ensure the 5V 3-Pin ARGB connector is securely plugged into the motherboard's ARGB header.
    • Confirm that you are using a 5V 3-Pin ARGB header, not a 12V 4-Pin RGB header.
    • Check your motherboard's ARGB software to ensure lighting effects are enabled and configured.
    • If daisy-chaining multiple fans, ensure all connections in the series are secure.
  • Unusual Noise:
    • Check for any cables or obstructions hitting the fan blades.
    • Ensure the fan is securely mounted and not vibrating against the case.
    • Dust buildup can sometimes cause noise; clean the fan thoroughly.

9. User Tips

  • Quiet Operation: Users report these fans are notably quiet, even under load, making them suitable for silent PC builds.
  • ARGB Synchronization: The ARGB lighting is highly compatible and can often synchronize easily with other brands of ARGB components, including water coolers.
  • Mounting Tip: If the fan mounting holes do not appear to have pre-cut threads, a screwdriver can be used to create the threads when installing the screws for the first time.
  • Aesthetics: The fans are praised for their beautiful and vibrant ARGB colors, with white LEDs appearing as true white.

10. Warranty and Support

TUMMASTER provides a standard warranty for this product. Please refer to your purchase documentation or the official TUMMASTER website for detailed warranty terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact the retailer or TUMMASTER customer service.

A detailed user manual in PDF format is available for download. You can access it via this link: TUMMASTER PRISM 7 PRO User Manual (PDF)

© 2024 TUMMASTER. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.