llano Wireless HDMI Transmitter Receiver User Manual

1. Product Overview

The llano Wireless HDMI Transmitter Receiver is designed for seamless, cable-free high-definition audio and video transmission. It offers universal Type-C compatibility, making it suitable for various devices such as PCs, laptops, phones, TVs, and monitors. Its compact and portable design ensures ease of use and transport.

2. Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

• Keep the device and its cord out of reach of children under 3 years old.
• Keep away from children unless supervised by an adult.
• Do not use this product for purposes other than its intended use.
• Inspect the product before each use; do not use if damaged.
• Follow installation and operation guidelines to avoid injury.
• Do not expose to water or moisture.
• Handle with care to avoid cuts or injuries.

3. Setup Instructions

Follow these steps to set up your Wireless HDMI Transmitter Receiver:

1. Prepare the Device: Before first use, remove all protective films from both the Transmitter (TX) and Receiver (RX) units.
2. Connect the Transmitter (TX): Plug the Type-C connector of the Transmitter unit directly into the USB-C port of your source device (e.g., PC, laptop, smartphone).
3. Connect the Receiver (RX): Insert the HDMI connector of the Receiver unit into an available HDMI input port on your display device (e.g., TV, monitor).
4. Power the Receiver (RX): Connect the provided USB cable to the USB-C port on the Receiver unit and then to a certified 5V power adapter (not included) or a powered USB port on your display device. Ensure the receiver receives stable power.
5. Select Input: Turn on your display device and select the corresponding HDMI input source where the Receiver is connected.

4. Operating Instructions

Once setup is complete, operating the device is straightforward:

1. Power On: Press and hold the power button on the Transmitter (TX) unit for approximately 3 seconds to turn it on. An indicator light should illuminate.
2. Automatic Connection: The Transmitter and Receiver units are designed to connect automatically. Your source device's screen should now be mirrored wirelessly to your display device.
3. Screen Mirroring: The device provides direct screen mirroring without requiring a Wi-Fi network or Bluetooth connection. Both video and audio will be transmitted.
4. Changing Modes: If available, a short press of the power button on the Transmitter unit may allow you to cycle through different display modes (e.g., mirror mode, extended mode). Refer to your source device's display settings for advanced options.
5. Pass-Through Charging: The Transmitter unit features a USB-C port for pass-through charging. You can connect a USB-C charging cable to this port to charge your source device while it is connected to the transmitter.

5. Maintenance

To ensure the longevity and optimal performance of your device, follow these maintenance guidelines:

• Keep both the Transmitter and Receiver units clean and dry.
• Store the device in a dry place away from direct sunlight and extreme temperatures when not in use.
• Avoid exposing the device to water, moisture, or harsh chemicals.
• Handle the units with care to prevent physical damage.

6. Troubleshooting

If you encounter issues with your Wireless HDMI Transmitter Receiver, refer to the following common problems and solutions:

• No Display/Signal on TV/Monitor:
  • Ensure both the Transmitter (TX) and Receiver (RX) units are securely connected to their respective devices.
  • Verify that the Receiver (RX) unit is receiving stable power from a certified 5V adapter or a powered USB port.
  • Check that your display device is set to the correct HDMI input source.
  • Confirm that all protective films have been removed from the device.
• Device Runs Warm:
  • It is normal for the Transmitter unit, especially, to become warm during extended operation. This does not typically indicate a malfunction.
• Compatibility Issues with Source Device:
  • Ensure your source device's USB-C port supports video output (DisplayPort Alternate Mode). Some Android devices may not support this feature.
• Input Lag or Intermittent Signal:
  • While minimal input lag is expected, significant lag or an unstable signal might be due to interference or distance. Try reducing the distance between the Transmitter and Receiver units.
  • Ensure there are no major obstructions between the TX and RX units.

7. Specifications

8. User Tips

Here are some helpful tips from other users to enhance your experience:

• The device is generally plug-and-play and easy to set up, often working immediately upon connection.
• The transmitter unit may become warm during extended use; this is normal and does not affect performance.
• The receiver unit requires a stable 5V power supply for optimal operation.
• No Wi-Fi or Bluetooth connection is needed for the direct wireless transmission, making it ideal for offline use or environments without network access.
• If you encounter compatibility issues, especially with Android devices, ensure your device's USB-C port supports video output (DisplayPort Alternate Mode).
• For the best performance and range, maintain a clear line of sight between the transmitter and receiver units.

9. Warranty and Support

For product support, warranty information, or technical assistance, please contact the manufacturer or their authorized representative:

• Manufacturer: Shenzhen Leite Network Technology Co., Ltd.
  Contact: customerservice@pragueting.com / +86-19350977044
• EU Authorized Representative: UAB "SWAN EUROPE", Vilnius, Laisvės pr. 60.
  Contact: xsh@morningfast.com / +370-67086268

Please refer to the official product page for the most up-to-date support information.