Road Top 12.3" Linux Screen For Audi A3 S3

Contents

Road Top 12.3" Linux Screen User Manual

For Audi A3 S3 (2014-2019) with Wireless CarPlay, Android Auto, and Airplay Car Radio Player

1. Introduction

This manual provides detailed instructions for the installation, setup, operation, and troubleshooting of your new Road Top 12.3-inch Linux multimedia screen. Designed specifically for Audi A3 S3 models from 2014 to 2019 with MIB/MIB2 systems, this unit enhances your driving experience with advanced features like Wireless CarPlay, Android Auto, Airplay, and more.

The Road Top multimedia screen offers a high-resolution 1920*720 TFT display, providing a clearer picture, higher color brightness, and a better visual experience compared to standard 1280*480 screens.

Comparison of TFT 1920x720 and TFT 1280x480 resolutions, showing the superior clarity of 1920x720.

It seamlessly integrates with your vehicle's existing systems, retaining original car settings such as the OEM Factory System, CD Player, Steering Wheel Control, Speaker Sound Output, Reversing Camera, and Idrive Knob control.

Diagram showing the retention of original car settings including OEM Factory System, CD Player, Steering Wheel Control, Speaker Sound Output, Reversing Camera, and Idrive Knob control.

Enjoy hands-free communication, navigation, and multimedia playback with intuitive voice control via Siri and Google Assistant.

Image demonstrating Siri and Google Voice Control functionality on the screen, showing prompts like 'Hey Siri! Play See You Again on Spotify' and 'Hi Google! Navigate to Office'.

Compatible Models:

Table showing compatible models: Audi A3 S3, MIB (MIB1 & MIB2) system, years 2014-2019.

This product is compatible with Audi A3 S3 models from 2014-2019, specifically those equipped with the MIB (MIB1 & MIB2) system.

2. Product Specifications

CategoryItemDetails
SystemCPUSunplus 8368XU
Frequency700MHz
Operating SystemLinux 4.9
FlashSPI FLASH 1Gb
MemoryDDR3 2Gb
HardwareUSBUSB2.0 two-way
LCDLVDS resolution: 1920*720
Reverse InputAHD720P
Video InputCVBS X 2AHD
AUX OutputSupport
TouchscreenCapacitive screen
PMWRoad PWM for backlight adjustment
Software FeaturesMCUSTM32F105RBT6-QFP64
WIFI2.4Ghz 5.8Ghz dual-band
BluetoothBT5.0
Mixed SoundSupport
SoundBuilt-in DSP (16-band EQ)
CarPlaySupport
Android AutoSupport
AirPlaySupport
AutoLinkSupport
Digital Media FormatMp3, WMA, MP4, JPEG
Media PlaybackMusicSupports MP3, WMA, AAC, AC3, OGG, Real Audio, FLAG, APE; play, pause, previous / next song
VideoSupport avi, rmvb, mpeg, rm, mkv, mov, mp4, wmv, flv, etc., Support 1080p HD playback.
PictureSupport jpg / png etc.
ConnectivityBluetoothBluetooth music / call, address book, call history
PhysicalItem Size10.25" (Display Size: 12.3")
Item Weight2 kg
MaterialPlastic and metal
Voltage12 V
CertificationCE

3. Product Content

The package includes the following items:

  • Multimedia Smart Touchscreen (x1)
  • Screen Bracket (x1) - Note: The bracket varies depending on the specific vehicle model (A3, A4/A5, A6/A7, Q5).
  • Power Cable (x1)
  • AMI Cable / Screw Set (x1)
Image showing the 12.3 inch screen dimensions (29.2cm x 11cm) and the included accessories: Power cable and AMI cable.

The main screen unit measures approximately 29.2cm in length and 11cm in height, featuring a 12.3-inch display.

4. Installation Instructions

Important: Ensure the vehicle's ignition is fully turned off before beginning installation. Operating or installing the unit with power on may cause permanent damage to the car audio system.

4.1 Installation Guide Video

For a visual guide, scan the QR code below to watch the installation video:

QR code for Installation Guide Video

4.2 Cable Connection Chart

Refer to the diagram below for the general cable connection layout. Ensure USB cables are placed in the glove box for easy access.

Diagram showing the connection points for the head unit power cable, LVDS, USB, and camera cable.

4.3 Head Unit Power Cable Connection

  1. Disconnect the original power cable from the head unit.
  2. Attach the original power cable to the new wiring harness provided with the Road Top screen.
  3. Connect the new wiring harness to the head unit's power port.
Diagram illustrating the connection of the new head unit power cable, showing the original OEM power cable connecting to the new harness, which then connects to the head unit.

4.4 LVDS Cable Connection

  1. Disconnect the original LVDS cable from the OEM screen.
  2. Connect this original LVDS cable to the new Linux-compatible screen.

No other cables from behind the OEM screen are required; please leave them disconnected.

Diagram showing the LVDS cable connection, where the OEM LVDS cable is disconnected from the original screen and connected to the new screen.

4.5 AMI Cable Connection (For Equipped Vehicles)

If your vehicle is equipped with an AMI port, connect the provided AMI cable to enable CarPlay audio through the vehicle's AMI/AUX system.

Diagram showing the AMI cable connection. The AMI cable connects to the car's AMI port. An 'X' indicates 'no connection' for other ports.

Where to find the AMI port:

  • In the glove-box (look for an 'AMI jack').
  • In the central console box.
  • Behind media interface doors.

5. Basic Setup

After installation, complete the following basic settings. Failure to do so may prevent the OEM system from functioning properly.

5.1 OEM System Resolution Setup

When switching to the OEM interface, screen distortion or icon misalignment may occur due to a mismatch between the original system's resolution and the display. To resolve this, set the correct resolution in the Linux system settings:

  1. Navigate to: Setup > Car Settings > Original Car's Screen Resolution.
  2. For MIB-equipped vehicles, select the corresponding resolution from the options shown in the image below.
Screenshot of the Linux screen settings menu showing options for OEM System Resolution Setup, including MMI 3G 400x240, MMI 3G 800x480, MIB 400x240, MIB 800x480, and MIB 1024x480.

Tips for Resolution Selection:

  • If your original car's screen is 5.8 inches, choose MIB / MMI 3G 400X240.
  • If your original car's screen is 7 inches or 8 inches, choose MIB / MMI 3G 800x480.
  • If your original car's screen is 8.3 inches, choose MIB 1024X480.

To measure your original car's screen size, refer to the illustration and measure the diagonal length of the active display area.

5.2 Sound Setup

This unit supports two audio output modes: AMI/AUX Mode and Original Bluetooth Mode (for vehicles with factory Bluetooth audio).

5.2.1 For AUX Audio Output Mode

  1. Disconnect any existing Bluetooth connection between your phone and the vehicle.
  2. Switch to the OEM MIB System:
    1. Navigate to Media.
    2. Select "External audio player" to set the sound input to AUX.
  3. Once "The external audio player is selected" is shown, touch the screen to return to the Linux interface. CarPlay/Android Auto sound will now play.
Screenshots showing the selection of 'External audio player' in the OEM Media menu and the confirmation message 'The external audio player is selected'.

5.2.2 For AMI Audio Output Mode (only for vehicles with AMI function)

If your vehicle has an AMI port, ensure the AMI cable is connected as shown in Section 4.5.

  1. Disconnect any existing Bluetooth connection between your phone and the vehicle.
  2. Switch to the OEM MIB System:
    1. Navigate to Media.
    2. Select "External audio player" to set the sound input to AMI.
  3. Touch the screen to return to the Linux interface. CarPlay/Android Auto sound will now play.

Note: In AUX/AMI Audio Output Mode, please ensure that the "Use Car's BT Channel" option is turned off in the Linux system settings (Setup > System).

5.2.3 Original Bluetooth Mode (for vehicles with factory Bluetooth audio)

Note: This mode supports CarPlay, Android Auto, and Bluetooth calls only. It does not support audio from USB play, AirPlay, or Autolink.

  1. In the Setup > System menu, set the "Use Car's BT Channel" function to ON.
  2. Switch back to the OEM MIB system interface to pair your phone with the vehicle's original Bluetooth.
  3. After pairing, leave the OEM MIB system on the Bluetooth audio screen. Then, touch the screen to return to the Linux interface. CarPlay/Android Auto sound will now play.

5.3 Reverse Camera Setup

Note: The OEM 360° surround view is exclusively available through the OEM system and is not supported by the new system. Compatibility with aftermarket 360° cameras is also not available.

5.3.1 OEM Camera

For automatic transmission vehicles with an original factory (OEM) camera:

  1. Select "Original Camera" in the Setup > Car Settings > Reversing Settings menu.

For manual transmission vehicles with an original factory (OEM) camera:

  1. You will need to prepare a long wire to connect the vehicle's reversing light to the "BACK" wire on the unit's power harness.
Diagram showing the wiring for an OEM reverse camera in a manual transmission vehicle, connecting the 'BACK' wire to the reverse lamp 12V+.

5.3.2 Aftermarket Camera

For automatic transmission vehicles with an aftermarket camera:

  1. In Setup > Car Settings > Reversing Settings, select "Aftermarket Camera".
  2. Connect the camera by following the provided wiring diagram.
Wiring diagram for an aftermarket reverse camera in an automatic transmission vehicle, showing connections for Rear-Camera, Rear Camera PWR, Connection, Red, and GND 12V-.

Specification Note: Maximum supported resolution is AHD720P. 1080P is not compatible.

For manual transmission vehicles with an aftermarket camera:

  1. You will need to prepare a long wire to connect the vehicle's reversing light to the power extension cable of the aftermarket camera.
Wiring diagram for an aftermarket reverse camera in a manual transmission vehicle, showing connections for Rear-Camera, BACK, No Connection, Red, Connect to Reverse Lamp 12V+, and GND 12V-.

After completing all configurations and confirming the screen is fully operational, securely reassemble the dashboard and mounting bracket.

6. Operating Instructions

6.1 Wireless / Wired CarPlay & Android Auto

The Road Top screen supports both wireless and wired CarPlay and Android Auto. These features allow you to use your iOS/Android apps on the screen, including online maps, music playback, phone calls, and messaging.

Diagram explaining Wireless/Wired CarPlay and Android Auto. CarPlay is described as a smarter, safer way to use iOS while driving, and Android Auto as mirroring features from an Android device.

Before using CarPlay/Android Auto:

  1. Disconnect any existing Bluetooth connection between your phone and vehicle.
  2. Navigate to Setup > Smart Phone > Smart Phone List and set the corresponding CarPlay and Android Auto function to ON.

6.1.1 Wireless CarPlay / Android Auto Connection Steps:

  1. Turn on your phone's WiFi.
  2. Turn on your phone's Bluetooth.
  3. Search for and pair with the device Bluetooth named "CAR-XXXX".
  4. Allow contacts and favorites sync if prompted.
  5. Click "Connect" to use CarPlay / Android function.

6.1.2 Wired CarPlay / Android Auto

Connect your phone to this device via a high-quality data cable, and confirm any authorization requests on your phone.

The screen supports wireless/wired mirror link for both iOS (AirPlay) and Android (AutoLink) phones. This feature allows you to use map navigation, watch movies, or listen to music from apps installed on your phone.

Diagram illustrating AirPlay for iOS phones and AutoLink for Android phones, showing screen mirroring functionality.

Before using AirPlay/AutoLink:

  1. Navigate to Setup > Smart Phone > Smart Phone List and set the corresponding AirPlay or AutoLink function to ON.

6.2.1 AirPlay (for iOS phones)

  1. Use your iPhone to search for the device WiFi name "CAR-XXXX" and connect to it.
  2. If a password is required, enter "66668888".
  3. Select "AirPlay" in Screen Mirroring from your iPhone.
  1. Use your phone browser to scan the QR code below to download the "Autolink Pro" App.
  2. Open the "Autolink Pro" app from your phone.
  3. Search for the WiFi "CAR-XXXX" and connect it.
  4. Allow "Autolink Pro" to use mirror link function.

6.3 Other Functions

6.3.1 Hands-Free Phone Calls

Make calls, return missed calls, and listen to voicemail directly from the screen, keeping your hands free for driving.

Screenshot of the hands-free phone call interface on the screen, showing call duration, contact name, and options to end, mute, or use a keypad.

6.3.2 Mobile Music Play

Download various music apps and link them to the homescreen menu for easy access and playback.

Screenshot of the mobile music playback interface on the screen, showing song title, artist, and playback controls. Icons for Spotify, YouTube Music, Tidal, and Amazon Music are visible.

6.3.3 Navigation & Maps

Support all kinds of mainstream maps, allowing you to travel one step faster. Use voice commands to find routes, gas stations, or points of interest.

Screenshot of the navigation interface on the screen, displaying a map with route information and voice command options like 'Navigate to XX Station' or 'Go to a nearby gas station'. Icons for Waze, Google Maps, and other map services are shown.

7. Maintenance

  • Keep the screen clean by gently wiping it with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
  • Ensure all cable connections are secure to prevent intermittent issues.
  • Regularly check for firmware updates to ensure optimal performance and access to the latest features.

8. User Tips

  • Installation: Many users found the installation process easy, especially with the provided video instructions. Take your time and follow the steps carefully.
  • Firmware: If you encounter any issues, check if a firmware update is available. Some users noted that updating the firmware resolved initial problems.
  • Aftermarket Camera Wiring (Manual Transmission): For aftermarket reversing cameras in manual transmission vehicles, connect the camera's 12V cable to the radio's 12V cable, not directly to the reversing light.
  • Sound Quality: If the sound quality is poor, adjust the EQ settings on the screen or directly within the music app on your phone.
  • Microphone: The built-in microphone quality might be basic, but Google Assistant generally recognizes speech well. The product supports the original car microphone via Bluetooth Audio mode.
  • Easy Setup: The product is generally considered easy to install and set up.

9. Troubleshooting (FAQ)

Q: My OEM system screen cannot be displayed normally.

A: Please set the correct resolution in Setup > Settings > Car Settings > Original Screen Resolution. If the issue continues, scan the QR code below for detailed troubleshooting steps.

QR code for OEM System Resolution Setup Guide

Q: My car has no sound.

A: Make sure you have properly configured either Bluetooth Audio or AMI/AUX. Only one mode can be active at a time. Using both may cause no sound. For step-by-step guidance, scan the QR code below.

QR code for Sound Setup Guide

Q: My reverse camera isn't functioning.

A: If the reverse camera is not working, first identify:

  1. Whether it is an OEM or aftermarket camera.
  2. Whether your vehicle is automatic or manual transmission.

Then, go to Section 5.3 "Reverse Camera Setup" in this manual and follow the corresponding setup steps.

Q: During calls, the other party reports hearing an echo.

A: Please go to Setup > Audio > Call Echo Cancellation and select "Start Auto AEC" to perform echo cancellation. For optimal call quality, please ensure the vehicle interior remains quiet.

A: Turn on the corresponding function on the Setup > Smart Phone > Smart Phone List. If you are still unsure, scan the QR code below to watch the video guide.

QR code for Connection Guide Video

Q: Does the product work with the original car microphone?

A: Yes, the original car microphone is supported via Bluetooth Audio mode. Please scan the QR code for video instructions on sound setup.

Q: Which steering wheel controls are compatible with this product?

A: The steering wheel supports volume adjustment, track skip, phone call answering, and voice control keys. Compatible only with vehicles equipped with a multi-function steering wheel.

Q: My CarPlay / Android Auto connection keeps dropping.

A: Please try changing to a new WiFi channel in Setup > WiFi > Channel.

10. Warranty & Support

Road Top offers a 1-year warranty for this product. For support, contact us via your purchase platform, email, or WhatsApp. Please include:

  • Order ID
  • Vehicle model and year
  • Detailed issue description. A video (preferably showing wiring) or photos are highly recommended for faster resolution.
Help Center graphic showing people working on laptops

Road Top Help Center

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.