Introduction
The XTAR SD1 is a versatile 4-colour LED dive beacon and signal light, designed for both underwater diving up to 100 meters and various outdoor lighting needs such as camping and hiking. It features 4 distinct colours (red, green, blue, white) and 8 lighting modes, providing flexibility for different situations. Its compact design and robust construction make it a reliable companion for ensuring visibility and safety in challenging environments.
Key features include:
- Ideal for both underwater 100m diving and outdoor lighting.
- 4 colour lights, 8 lighting modes.
- Gently twist the body to switch among modes.
- Compatible with CR123A/Protected 16340 batteries.
- Low power reminder function.
- Memory function for preferred mode.
- Enlarged lanyard hold for quick attachment.
What's in the Box
The XTAR SD1 is available in two main configurations: the standard kit (KT) and a set that includes a battery. Please check your packaging to confirm the exact contents.
Standard Kit (KT) includes:
- Flashlight (XTAR SD1)
- O-rings (spare)
- User Manual
- Snap hook
- Lanyard
Set (with Battery) includes:
- Flashlight (XTAR SD1)
- O-rings (spare)
- User Manual
- 1x battery (CR123A or Protected 16340)
- Snap hook
- Lanyard
Specifications
| Feature | Detail |
|---|---|
| Model Number | SD1 |
| Brand Name | XTAR |
| Item Type | FLASHLIGHTS / Dive Beacon |
| Function | Hard Light, Signal Light |
| Light Source | Fluorescent (LED) |
| Lamp Bead Color Temperature | 6000K-6500K |
| Wattage | 1.6W max |
| Lumen | White: 25lm, Red: 10lm, Blue: 10lm, Green: 25lm |
| Switch Mode | High/Middle/Low (via twisting body) |
| Support Dimmer | 8 lighting modes |
| Focal Length | Adjustable |
| Waterproof | Yes, Underwater 100 meters |
| Impact Resistant | 1.5m |
| Body Material | Aluminum alloy |
| Material | AL6063 POM |
| Lighting Distance | 100-200 m |
| Charger | Rechargeable (if using 16340) |
| Is Batteries Included | Yes (depending on package) |
| Voltage Range | 2.0-4.5V |
| Certification | CE |
| Origin | Mainland China |
| Size | Ø23mm (Head) x 66mm (Length) |
| Net Weight | 27g (excluding battery) |
Runtime (Approximate)
| Colour Light | Mode | Luminance | Runtime (16340 650mAh) | Runtime (CR123A) | Runtime (16340 900mAh) |
|---|---|---|---|---|---|
| White | Constant | 25lm | 5hrs | 8hrs | 7.3hrs |
| Flashing | / | 10hrs | 16hrs | 14hrs | |
| Red | Constant | 10lm | 5hrs | 8hrs | 7.3hrs |
| Flashing | / | 10hrs | 16hrs | 14hrs | |
| Blue | Constant | 10lm | 5hrs | 8hrs | 7.3hrs |
| Flashing | / | 10hrs | 16hrs | 14hrs | |
| Green | Constant | 25lm | 5hrs | 8hrs | 7.3hrs |
| Flashing | / | 10hrs | 16hrs | 14hrs |
Setup
- O-ring Preparation: Before each dive, clean and lubricate the O-ring as needed. Apply only a thin film of lubricant. O-rings should appear shiny; wipe off any excess lube.
- Battery Installation:
- Unscrew the cap of the dive beacon.
- Insert a CR123A or a protected 16340 Li-ion battery with the positive pole (+) facing towards the cap.
- Screw the cap back on tightly.
- Recommendation: Use XTAR brand batteries for optimal performance.
- Powering On/Off:
- To power the light ON, tighten the cap after installing the battery.
- To power the light OFF, anti-clockwise rotate the cap slightly until the light turns off.
Operating Instructions
Changing Modes
To change between the 8 lighting modes, gently twist the body of the SD1 (tighten and loosen the cap). The modes will cycle in the following sequence by default:
- White (Constant)
- White (Flashing)
- Red (Constant)
- Red (Flashing)
- Blue (Constant)
- Blue (Flashing)
- Green (Constant)
- Green (Flashing)
To cycle through modes, power off the light within 3 seconds, and then power it on again.
Memory Function
The SD1 features a memory function. If the light is powered off for more than 5 seconds, the last used lighting mode will be memorized. When you turn it on again, the dive beacon will start cycling from this memorized mode.
Low Power Reminder Function
When the battery level is low, the light will automatically step down its output level to remind you it's time to charge or replace the battery. Approximately 10 minutes after the auto-downshift, the light will automatically turn off and enter a sleep state.
- CR123A (< 3.4V): When battery voltage drops below approximately 2.0V, it will auto-downshift output, then automatically shut down after about 10 minutes and enter sleep state.
- 16340 Li-ion Battery (> 3.4V): When battery voltage drops below approximately 2.9V, it will auto-downshift output, then automatically shut down after about 10 minutes and enter sleep state.
Maintenance
- Post-Dive Cleaning: After each dive, soak the sealed light in fresh water for about 20 minutes to remove any residual salt, sand, and dirt. Dry the light thoroughly before opening the battery compartment or storing it.
- O-ring Care: Clean the O-ring groove with a cotton swab and regularly apply lubricant to the O-rings to help prevent dry cracking. Replace O-rings if they are damaged after prolonged use.
- Battery Storage: When the battery is exhausted or the light will not be in use for a couple of weeks, please remove the battery from the light.
- Battery Selection for Lifespan: To prolong the lifespan of your light, use CR123A or a protected 16340 Li-ion battery with sufficient energy only. When using a rechargeable 16340 lithium-ion battery, it is recommended to use a fully charged or at least a 16340 lithium-ion battery with a voltage >3.6V to prevent over-discharge and damage.
Troubleshooting
Light Not Turning On or Dimming Unexpectedly
- Check Battery: Ensure the battery is correctly inserted with the positive pole facing the cap. Verify the battery has sufficient charge.
- Tighten Cap: Make sure the cap is screwed on tightly to establish electrical contact.
- Low Voltage Downshift: The light automatically reduces output and eventually turns off when the battery voltage is low. This is a protective feature. Replace or recharge the battery.
- O-ring Condition: Inspect O-rings for damage or improper lubrication, which could affect sealing and contact.
Difficulty Changing Modes
- Ensure you are twisting the body (tightening and loosening the cap) within 3 seconds to cycle modes.
- If the light was off for more than 5 seconds, it will recall the last memorized mode. You will need to cycle through from that point.
User Tips
- Secure Attachment: The enlarged lanyard hold is designed for quick attachment to diving equipment, backpacks, or tents. Always ensure the beacon is securely fastened to prevent loss, especially during activities like diving.
- Deep Dive Performance: Users have reported excellent performance even at depths of 30 meters in wrecks, indicating its reliability for serious diving.
- Battery Choice: While both CR123A and 16340 batteries are compatible, consider the rechargeable 16340 for regular use to save on disposable battery costs and ensure consistent performance. Always use protected 16340 batteries.
Warranty & Support
For detailed warranty information, technical support, or further inquiries, please refer to the official user manual PDF or contact XTAR directly.
Official User Manual (PDF): A comprehensive user manual is available for download. You can find it at: XTAR SD1 User Manual PDF
Manufacturer Contact Information:
Shenzhen XTAR Electronics Co.,LtdAddress: 5th Floor, No.77 Xinhe Rd, Shangmugu, Pinghu Area Longgang District, Shenzhen, Guangdong, China 518111
Tel/Fax: (+86)755-25507076
E-mail: info@xtar.cc
Web: www.xtar.cc