XTRONS PX94TCTLGS

Contents

XTRONS 9" Android 14 Car Multimedia Player User Manual

Model: PX94TCTLGS

XTRONS Car Multimedia Player installed in a Toyota Tacoma dashboard

Image: XTRONS 9-inch Android 14 Car Multimedia Player seamlessly integrated into a Toyota Tacoma 2005-2013 dashboard, displaying a modern user interface with navigation and music controls.

Important Safety Information & Precautions

Notice of Intended Use

Our products are designed to enable viewing of video ONLY for rear-seat occupants, and are not intended for viewing by the driver when the vehicle is in motion. Such use might distract the driver or interfere with the driver's safe operation of the vehicle, and thus result in serious injury or death. Such use might also violate state or local laws. Manufacturer disclaims any liability for any bodily injury or property damage that might result from any improper or unintended use.

General Precautions

  • Comply with all applicable laws and regulations regarding the use, installation, and operation of this product in your vehicle.
  • Do not mix this product with general household waste for disposal. Follow local laws for electronic components and batteries.
  • Use this unit with a 12-volt battery and negative grounding only.
  • Disconnect the (-) battery cable before installation to avoid electrical shorts.
  • Do not install this product in a vehicle without an ACC wire or circuitry.

Android Car Multimedia Player Safety

  • Do not attempt to install or service this product yourself without proper training and experience.
  • Avoid contact with liquids to prevent electrical shock, damage, smoke, or overheating.
  • If liquid or foreign matter enters the product, park safely, turn off ignition (ACC OFF), and consult your dealer.
  • If you notice smoke, strange noises, odors, or abnormal screen signs, turn off power immediately and consult your dealer.
  • Do not disassemble or modify the product due to high-voltage components.
  • Children under 12 years old should use the player under adult supervision.

Remote Control Safety

  • The remote control requires two AAA batteries. Keep batteries out of reach of children. Seek medical care immediately if a battery is swallowed.
  • Run the vehicle engine while using the product to avoid draining the battery.

Hearing Safety

  • Adjust volume to an appropriate level. High volume can cause permanent hearing damage.
  • Set volume to a low level initially, then increase slowly to a comfortable, clear sound.
  • Avoid listening for long periods, even at reasonable volumes, to prevent hearing damage.

Setup & Installation

What's in the Box

The package includes the following components:

  • 1 x XTRONS Android Car Multimedia Player
  • 1 x Remote Control
  • 1 x ISO Wiring Harness
  • 1 x Radio Antenna Cable
  • 1 x Camera Cable
  • 2 x USB Cables
  • 1 x SIM Card Slot Cable
  • 1 x WiFi Antenna
  • 1 x GPS Antenna
  • 1 x 4G Antenna
  • 1 x CANbus Box
  • 1 x Microphone
  • 1 x Original USB Connection Cable
  • 1 x User Manual (this document)
  • Several Screws (depending on model)
Product dimensions and accessories list

Image: Diagram showing the front and side dimensions of the head unit (235mm width top, 240mm width bottom, 200mm height, 178mm depth, 98mm height of main body). Below are images of all included accessories with labels.

Detailed accessories and wiring diagram

Image: A detailed view of the rear of the head unit showing various ports and connectors, along with individual images of each accessory cable and component. This image also includes a comprehensive wiring diagram.

Player Overview

Front Panel:

  1. Back/Power: Touch to return to the previous screen. Touch and hold to turn off the power.
  2. LED Lamp Switch: Touch to switch the LED atmosphere lamp color.

Side Panel:

  1. HDMI Port: Connect a device using an optional HDMI cable or adapter.
  2. USB Port: Plug a USB storage device into the USB port.
  3. Light Switch: Push to turn the light on or off.

Installation Instructions

General Notes:

  • Make all electrical connections before mounting.
  • Do not trap any bulk wiring or accessories between the bracket and unit to avoid blocking airflow or causing pressure.
  • Use extreme caution with screws to avoid damaging vehicle roof or other components.
  • Using a mounting substrate other than the supplied bracket may cause performance issues.

Wiring Diagram

Detailed wiring diagram for the XTRONS multimedia player

Image: A comprehensive wiring diagram showing all input and output connections on the rear of the head unit. Key connections include: 4G Antenna, Wi-Fi Antenna, GPS Antenna, USB Ports, Brake Control Cable, Reversing Camera Power, Bluetooth Antenna, CANbus, Radio Antenna, SIM Card Slot, Subwoofer Output, External Microphone, Audio Inputs/Outputs, Amplifier Control, CCD AVIN, AUX-IN, Illumination Cable, Steering Wheel Control, ISO Wiring Harnesses, and Reverse Camera Ports.

Power Connections

  • B+ (Yellow): Constant 12V power.
  • ACC (Red): Switched 12V power (Accessory).
  • GDN (Black): Ground connection.
  • Door Control - (White): Door trigger negative.
  • Door Control + (Yellow): Door trigger positive.

Audio/Video Connections

  • Audio Right Input (Red)
  • Audio Left Input (White)
  • Video Input 1 (Yellow)
  • Video Input 2 (Yellow)

Installing Mounting Bracket

  1. Once pre-wiring is complete, locate the mounting bracket and screws.
  2. Align the mounting bracket with the direction arrow facing the front of the vehicle. Ensure no obstructions between the bracket and roof support.
  3. Note: The headliner may need to be cut. Be careful not to cut any wires above the headliner.
  4. Install screws while holding the bracket in place.
  5. Caution: Ensure screws do not pierce the outer roof skin.

Installing the Android Car Multimedia Player

  1. Make all electrical connections.
  2. Attach the monitor to the mounting bracket using screws.

First Use & System Language Setting

In-Car Use

  1. Turn off vehicle ignition and connect the supplied car charger to the vehicle's power outlet.
  2. Connect the charger cable to the DC power input on the side of the player.
  3. Turn vehicle ignition to ON or ACC and turn on the player's power switch.

System Language Setting

  1. Press the
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.