1. Introduction
This manual provides detailed instructions for the installation, operation, and troubleshooting of your Wireless CarPlay Android Auto module. This device is designed to integrate Apple CarPlay and Android Auto functionalities into your Mercedes Benz vehicle equipped with the NTG 6.0 MBUX system, enhancing your driving experience with smart navigation, communication, and entertainment features.
The module supports both wired and wireless connections, allowing you to enjoy online maps, music, podcasts, and sync your phone information directly on your car's screen.
The Wireless CarPlay Android Auto module integrates seamlessly with your car's display, offering navigation, music, and phone functionalities.
2. Safety Information
Please read and understand all safety instructions before installing or operating this product. Failure to follow these instructions may result in injury or damage to the product or vehicle.
- Professional installation is highly recommended to ensure correct wiring and avoid damage to your vehicle's electrical system.
- Always disconnect the vehicle's battery before performing any electrical work.
- Do not expose the module to water, moisture, or extreme temperatures.
- Ensure all cables are securely connected and routed away from moving parts or heat sources.
- Do not attempt to disassemble or modify the module.
3. Package Contents
Please check the package contents upon receipt:
- Wireless CarPlay/Android Auto Module
- LVDS Harness
- Power Harness
- Camera/USB Cable
- Installation Accessories (screws, ties, etc. - may vary)
4. Specifications
| Feature | Detail |
|---|---|
| Brand | ANYFAR |
| Origin | Mainland China |
| Dimensions (L x W x H) | 25 cm x 15 cm x 9 cm |
| Weight | 0.729 kg |
| Chemicals of Concern | None |
5. Compatibility
This module is specifically designed for Mercedes Benz vehicles equipped with the NTG 6.0 MBUX System. Please verify your car model and year against the table below. It is crucial to confirm your original car radio homescreen matches the NTG 6.0 interface before installation.
Refer to this table to confirm your Mercedes Benz model's compatibility with the NTG 6.0 system.
Before installation, verify your car's original radio homescreen matches the NTG 6.0 interface shown as compatible.
6. Setup and Installation
Installation involves connecting the module to your car's existing wiring. While the process can be straightforward with the right tools, professional installation is recommended.
6.1. Pre-installation Check
As shown in the compatibility section, ensure your car's original radio homescreen is the NTG 6.0 version. Incompatible systems (NTG 4.5, 4.7, 5.0/5.1) will not work with this module.
6.2. Wiring Diagram
Follow the wiring diagram carefully to connect the LVDS, power, camera, and USB harnesses to the module and your vehicle's system.
This diagram illustrates the necessary connections for installing the module into your vehicle's existing wiring harness.
6.3. DIP Settings
After physical installation, configure the DIP switches on the module according to your specific car model and screen size. Refer to the table below for the correct settings.
Adjust the DIP switches on the module according to your specific car model and screen size as per this table.
Note: Ensure the dial is set to "ON". After changing the DIP Settings, please reboot the decoder box for the changes to take effect.
7. Operating Instructions
7.1. Switching Between Systems
To switch between the factory OEM car system and the CarPlay/Android Auto system, long press the "back" button on your car's knob controller.
7.2. Button Controls
The module integrates with your car's existing controls for a seamless experience.
Steering Wheel Controls:
Learn how to control calls and audio volume using your steering wheel buttons.
Console Controls & Touchscreen:
Understand the functions of the console buttons and touchscreen for navigating between the OEM system and CarPlay/Android Auto.
7.3. Wireless CarPlay
The module supports both wired and wireless Apple CarPlay. Enjoy online maps, music, podcasts, and sync all your phone information directly on your car's screen.
Experience Apple CarPlay wirelessly, accessing navigation, music, and communication apps.
7.4. Wireless Android Auto
Plug once, sync all. The module supports both wired and wireless Android Auto. Navigate, play music, reply to messages, and use voice commands without taking your eyes off the road.
Enjoy Android Auto wirelessly, with features like Google Maps, Spotify, and voice commands.
8. Wireless Connection Guide
Before using the wireless connection, please pair your device via Bluetooth and ensure the vehicle's audio system is set to Bluetooth music mode for optimal connection and audio performance.
8.1. For Wireless CarPlay
- Turn on your iPhone's Bluetooth and Wi-Fi.
- Go to the Bluetooth settings of the Smart Box (module).
- On your iPhone, select the Bluetooth device named "CAR Audio_XXXX" (where XXXX is a unique identifier).
- A pairing request window will pop up on your iPhone. Confirm the pairing code and select "Pair".
- If prompted, select "Use CarPlay" on your iPhone.
- Ensure your car's audio source is set to the original car radio (MBUX) for audio output.
8.2. For Wireless Android Auto
- Turn on your Android phone's Bluetooth and Wi-Fi.
- Go to the Bluetooth settings of the Smart Box (module).
- On your Android phone, select the Bluetooth device named "CAR Audio_XXXX".
- Follow the on-screen prompts on your phone and car display to complete the pairing process.
- Alternatively, you can connect your Android phone via a USB cable to initiate Android Auto.
- Ensure your car's audio source is set to the original car radio (MBUX) for audio output.
9. External Settings (Camera & Radar)
This CarPlay interface supports aftermarket camera input for clear rearview imagery and can integrate with aftermarket radar systems. For detailed wiring diagrams and visual aids for these settings, please refer to the full PDF user manual available for download.
9.1. Rear View Camera Input
The module provides dedicated inputs for aftermarket rear view cameras. Connect your aftermarket camera to the designated CAMERA/USB input on the module as per the installation diagram in the PDF manual.
9.2. Radar and Trajectory Settings
If your aftermarket camera supports a reversing trajectory line or you have an aftermarket radar system, you can configure these settings through the module's system menu:
- Enter the system settings by navigating to "Factory mode" -> "Advanced mode".
- Enter the password "888888".
- Go to "MCUsetup" and uncheck the "A0" option to enable the reversing rear view function.
- To display the reversing trajectory line, uncheck the "A1" box.
- For aftermarket radar options, uncheck the "A2" box to activate it.
- Return to the previous level and click "Restart system" for the changes to take effect.
The front camera input configuration follows a similar process.
10. Maintenance
To ensure the longevity and optimal performance of your module, follow these simple maintenance guidelines:
- Keep the module dry and away from moisture.
- Clean the module and surrounding areas with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Ensure proper ventilation around the module to prevent overheating.
- Avoid exposing the module to extreme temperatures (hot or cold).
11. Troubleshooting
If you encounter issues with your Wireless CarPlay Android Auto module, please refer to the following troubleshooting steps:
11.1. Black Screen / No Display
- Check all connections: Ensure all harnesses (LVDS, power, camera, USB) are securely and correctly connected to the module and the vehicle's system.
- Verify DIP switch settings: Double-check that the DIP switches are configured precisely according to your car model and screen size as per the "DIP Settings" table. Incorrect settings can lead to a black screen.
- Reboot the decoder box: After adjusting DIP settings, always reboot the module to apply changes.
- Confirm compatibility: Re-verify your car model, year, and original radio homescreen against the compatibility information. Incompatible systems will not work.
11.2. CarPlay/Android Auto Bugs or Glitches
- Phone Connectivity: Ensure your phone's Bluetooth and Wi-Fi are both turned on and correctly paired with the module.
- Car Audio Mode: Verify that your car's audio system is set to Bluetooth music mode for proper audio output from CarPlay/Android Auto.
- Module Reboot: Try restarting the module by turning off and on your car's ignition.
- Phone Restart: Restart your smartphone and attempt to reconnect.
11.3. Original Reversing Camera Not Working
- This module is designed to support aftermarket cameras. Integration with the original reversing camera may require specific settings or might not be directly supported.
- Refer to the "External Settings" section for instructions on setting up aftermarket cameras and related functions.
11.4. Switching Systems Activates Hazard Lights
- It is a known operational characteristic that double-pressing the warning button (hazard lights) is the method to switch between the OEM system and CarPlay/Android Auto. This action will briefly activate the hazard lights. This is normal behavior for this module.
11.5. Not Compatible with Specific Models (e.g., 2021 Gla200, 2021 CLA)
- Thoroughly re-verify your exact car model, year, and screen size against the provided compatibility table.
- Ensure your original radio homescreen definitively matches the NTG 6.0 interface. Even slight variations in model year or region can affect compatibility.
12. User Tips
- Use the Right Tools: Installation can be challenging due to hard-to-reach cables. Having appropriate tools will make the process much smoother.
- Steering Wheel Controls: While volume and call controls are supported, advanced scrolling or menu navigation via steering wheel buttons may not be fully integrated.
- PDF Manual: For complex diagrams and detailed visual instructions, always refer to the comprehensive PDF user manual.
13. Warranty and Support
For any technical assistance, warranty claims, or further inquiries, please contact the seller or manufacturer directly. Please have your product model and purchase details ready when contacting support.
A comprehensive PDF manual with additional diagrams and detailed instructions is available for download: View User Manual (PDF)