RAGEER PCIE to NVMe Adapter Card

Contents

RAGEER PCIE to NVMe Adapter Card User Manual

Model: PCIE to NVMe Adapter Card

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your RAGEER PCIE to NVMe Adapter Card. This adapter allows you to connect an M.2 NVMe Solid State Drive (SSD) to your computer's PCI Express slot, enhancing storage performance.

RAGEER PCIE to NVMe Adapter Card with metal bracket

Figure 1: RAGEER PCIE to NVMe Adapter Card

2. Package Contents

Please check the package contents upon unboxing. If any items are missing or damaged, contact customer support.

  • 1 x PCIE Adapter Card
  • 1 x Metal Full Bracket
  • 1 x Screwdriver
  • Set of Screws
Contents of the RAGEER PCIE to NVMe Adapter Card package including adapter, bracket, screwdriver, and screws

Figure 2: Package Contents

3. Features

  • High-Speed Performance: Supports PCIe 4.0/3.0 with a maximum theoretical bandwidth of 64Gbps (PCIe 4.0 x4) or 16Gbps (PCIe 3.0 x1).
  • Wide Compatibility: Backward compatible with PCIe 2.0 and 1.0. Compatible with PCIe X4, X8, and X16 slots.
  • M.2 NVMe Support: Designed for M-key NVMe SSDs.
  • Multiple SSD Sizes: Supports M.2 NVMe SSDs in 2230, 2242, 2260, and 2280 form factors.
  • Easy Installation: Simple plug-and-play setup with included metal bracket and tools.
Diagram showing PCIe 4.0/3.0 compatibility with speeds up to 64Gbps Max

Figure 3: PCIe Speed Compatibility

Diagram showing full PCIe interface compatibility with X4, X8, X16 slots

Figure 4: PCIe Slot Compatibility

Diagram showing support for 2230, 2242, 2260, 2280 M.2 NVMe drives and M-key compatibility

Figure 5: Supported M.2 SSD Sizes and Key Types

4. Setup and Installation

Follow these steps to install your M.2 NVMe SSD onto the adapter card and then into your computer.

  1. Prepare the SSD: Gently insert your M.2 NVMe SSD into the M.2 slot on the adapter card. Ensure it is fully seated and press down.
  2. Secure the SSD: Use one of the provided screws to secure the M.2 SSD to the adapter card at the appropriate standoff for its length (2230, 2242, 2260, or 2280).
  3. Attach the Metal Bracket: Align the metal bracket with the adapter card and secure it using the provided screws.
  4. Install into PC: Power off your computer and unplug it from the power source. Open your computer case. Locate an available PCI Express slot (X4, X8, or X16 is recommended for optimal performance, though X1 versions can use X1 slots). Carefully insert the assembled adapter card into the chosen PCIe slot until it clicks into place.
  5. Secure the Card: Secure the metal bracket to your PC case with the case's retention mechanism or a screw.
  6. Final Steps: Close your computer case, reconnect power, and power on your system. The new NVMe SSD should be detected by your operating system. You may need to initialize and format the drive in Disk Management (Windows) or Disk Utility (macOS/Linux) before use.
Four-step installation guide: insert SSD, fix SSD with screw, secure metal bracket, finish by installing into PC

Figure 6: Installation Steps

5. Operating Instructions

Once installed, the RAGEER PCIE to NVMe Adapter Card operates transparently as a bridge between your M.2 NVMe SSD and your motherboard's PCIe bus. The performance will depend on the SSD's capabilities and the PCIe generation of your motherboard slot.

  • Driver Installation: Most modern operating systems (Windows 10/11, recent Linux distributions, macOS) have native NVMe drivers. No additional drivers are typically required for the adapter card itself.
  • BIOS/UEFI Settings: Ensure your motherboard's BIOS/UEFI is set to recognize NVMe drives. Some older motherboards may require a BIOS update for NVMe boot support. Consult your motherboard manual for specific settings.
  • Boot Drive: If you intend to use the NVMe SSD as a boot drive, ensure your motherboard supports booting from PCIe NVMe devices and configure the boot order in your BIOS/UEFI.

6. Maintenance

The RAGEER PCIE to NVMe Adapter Card requires minimal maintenance.

  • Cleaning: Periodically, you may use compressed air to gently remove dust accumulation from the adapter card and surrounding PCIe slots to ensure proper airflow and prevent overheating. Ensure your PC is powered off and unplugged before cleaning.
  • Handling: Always handle the adapter card by its edges to avoid touching the gold contacts or components, which could cause damage from static electricity.

7. Troubleshooting

  • SSD Not Detected:
    • Ensure the M.2 NVMe SSD is correctly seated in the adapter card.
    • Verify the adapter card is fully seated in the PCIe slot.
    • Check your motherboard's BIOS/UEFI settings to ensure NVMe support is enabled.
    • Try the adapter card in a different PCIe slot if available.
    • Ensure the SSD is an M-key NVMe type, not an M&B-key SATA type.
  • Slow Performance:
    • Ensure the adapter card is installed in a PCIe slot that matches or exceeds the SSD's capabilities (e.g., PCIe 4.0 SSD in a PCIe 4.0 slot).
    • Check if the PCIe slot is sharing bandwidth with other devices (e.g., SATA ports, other PCIe cards). Consult your motherboard manual.
    • Verify your operating system has the latest NVMe drivers.
  • Boot Issues:
    • Confirm your motherboard supports booting from NVMe PCIe devices.
    • Check the boot order in your BIOS/UEFI settings.
    • Ensure your operating system is installed correctly on the NVMe SSD for UEFI boot mode.

8. Specifications

FeatureSpecification
Product TypePCIE to M.2 NVMe Adapter Card
Interface TypePCI Express (PCIe)
PCIe VersionPCIe 4.0 / 3.0 / 2.0 / 1.0 (backward compatible)
PCIe Lane SupportX1 (for PCIE X1 SKU), X4 (for PCIE X4 SKU)
PCIe Slot CompatibilityPCIe X1, X4, X8, X16 slots
Max Data Transfer Rate64Gbps (PCIe 4.0 x4), 16Gbps (PCIe 3.0 x1)
Supported SSD TypeM.2 NVMe (M-key)
Supported SSD Sizes2230, 2242, 2260, 2280
Dimensions (Adapter Card)Approx. 108mm (L) x 1.6mm (H)
Dimensions (with Bracket)Approx. 121mm (H) x 12.4mm (W)
Product WeightApprox. 0.061 kg
Package Dimensions18cm (L) x 11cm (W) x 2cm (H)
Diagram showing dimensions of the adapter card and bracket: 108mm length, 121mm height, 12.4mm width, 1.6mm thickness

Figure 7: Product Dimensions

9. User Tips

No specific user tips were available from the provided data. For general best practices:

  • Always ensure your computer is powered off and unplugged before installing or removing any internal components.
  • Use anti-static precautions (e.g., an anti-static wrist strap) when handling internal computer hardware.
  • Refer to your motherboard's manual for detailed information on PCIe slot configurations and NVMe support.

10. Warranty and Support

For warranty information and technical support, please refer to the seller's policies or contact the RAGEER customer service. A detailed user manual in PDF format may also be available for download: RAGEER PCIE to NVMe Adapter Card User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.