GIRIER ZigBee Smart Switch Module

Contents

GIRIER Tuya ZigBee Smart Switch Module User Manual

Model: ZigBee Smart Switch Module (1CH, 2CH, 3CH, 4CH)

Brand: GIRIER

Introduction

This manual provides detailed instructions for the installation, operation, and troubleshooting of your GIRIER Tuya ZigBee Smart Switch Module. This smart switch module with neutral is designed to fit most standard mounting boxes, allowing you to upgrade your home's lighting without replacing your existing wall switches. It integrates seamlessly into your smart home ecosystem, offering control via the TuyaSmart/Smart Life app or voice commands through Alexa and Google Home.

The module supports various configurations including 1-channel (1CH), 2-channel (2CH), 3-channel (3CH), and 4-channel (4CH) setups, and is compatible with physical two-way control.

GIRIER ZigBee Smart Switch Modules (1CH and 2CH variants) with Tuya, Google Assistant, and Amazon Alexa logos.

Figure 1: GIRIER ZigBee Smart Switch Modules (1CH and 2CH variants) with smart home compatibility.

Technical Specifications

Detailed technical specifications table for the ZigBee Smart Switch Module.

Figure 2: Detailed Technical Specifications.

GIRIER ZigBee Smart Switch Module Specifications
PropertyValue
Product TypeZigBee Switch Module
VoltageAC100-240V 50/60Hz
Max. Load (1CH)LED 250W 10A
Max. Load (2CH)LED 2x150W 2x5A
Max. Load (3CH)LED 3x150W 3x3.3A
Max. Load (4CH)LED 4x150W 4x2.5A
Operation Frequency2.405GHz-2.480GHz
Operation Temperature-10℃ ~ +40℃
ProtocolZigBee 3.0 (IEEE 802.15.4)
Operation Range<100m
Dimensions (WxDxH)39.2 x 39.2 x 18 mm
IP RatingIP20
Warranty2 years
CertificatesCE, RoHS
AppTuyaSmart/Smart Life
Voice ControlCompatible with Alexa, Google Home Assistant
Hub RequirementYes (Tuya ZigBee Hub)
Shell MaterialPC/Flammability Rating: V0

Safety Warnings

  • Installation must be carried out by a qualified electrician in accordance with local regulations.
  • Keep the device out of reach of children.
  • Keep the device away from water, damp, or hot environments.
  • Install the device away from strong signal sources such as microwave ovens that may cause signal interruption, leading to abnormal operation.
  • Obstruction by concrete walls or metallic materials may reduce the effective operation range of the device and should be avoided.
  • Do NOT attempt to disassemble, repair, or modify the device.

Setup and Installation

Important: A Tuya ZigBee gateway hub is required for smart functionality. Without the gateway, the module will only function in manual mode.

Wiring Instructions

  1. Turn off the power supply before carrying out any electrical installation work to prevent electric shock.
  2. Connect wires according to the specific wiring diagram for your module type (1CH, 2CH, 3CH, or 4CH). Ensure a neutral wire is present and connected.
  3. Insert the module into the junction box. The mini body design allows it to fit most standard switch mounts.
  4. Turn on the power supply and proceed with the switch module configuration instructions.
Image showing the compact size of the ZigBee switch module fitting into a wall switch box.

Figure 3: The compact design allows the module to fit into most switch mounts.

Wiring Diagrams

Refer to the following diagrams for correct wiring based on your module's channel count and desired control type (Single Control, Double Switch, or Without Switch). Ensure you identify the Live (L), Neutral (N), Load (L1, L2, L3, L4), and Switch (S1, S2, S3, S4, COM) terminals correctly.

Wiring diagram for 1CH ZigBee Switch Module showing connections for single control, double switch, and without switch configurations.

Figure 4: 1CH ZigBee Switch Module Wiring Diagram.

Wiring diagram for 2CH ZigBee Switch Module showing connections for single control, double switch, and without switch configurations.

Figure 5: 2CH ZigBee Switch Module Wiring Diagram.

Wiring diagram for 3CH ZigBee Switch Module showing connections for single control, double switch, and without switch configurations.

Figure 6: 3CH ZigBee Switch Module Wiring Diagram.

Wiring diagram for 4CH ZigBee Switch Module showing connections for single control, double switch, and without switch configurations.

Figure 7: 4CH ZigBee Switch Module Wiring Diagram.

App Installation and Pairing

To utilize the smart features of your GIRIER ZigBee Switch Module, you need to install the Tuya Smart or Smart Life app and pair the device with a Tuya ZigBee Hub.

  1. Download the App: Scan the QR code provided in Figure 8 or search for "Tuya Smart" or "Smart Life" in your device's app store (Google Play for Android, App Store for iOS).
  2. Register/Log In: Open the app and either register a new account using your mobile number or email address, or log in if you already have an account. Complete the verification process.
  3. Create Family: Click "Create Family" within the app to set up your smart home environment.
  4. Prepare ZigBee Gateway: Ensure your Tuya ZigBee Gateway is already added and installed to your Wi-Fi network and is online. The switch module must be within the range of the ZigBee Gateway Network.
  5. Reset the Device for Pairing: After wiring the switch module, perform one of the following reset methods until the indicator light inside the module flashes quickly:
    • Power the device on/off 5 times.
    • Switch the traditional switch connected to the module on/off 5 times.
    • Press the reset key on the module for about 10 seconds.
  6. Add Device in App: In the Tuya Smart/Smart Life app, open the control panel of your ZigBee gateway. Click the "+" (Add sub-device) button and follow the on-screen instructions for pairing.
  7. Completion: The connection process may take 10-120 seconds depending on your network conditions. Once complete, you can control the device via your mobile phone.
Diagram showing app remote control features, hub requirement, mini body, and 2-way control for the ZigBee switch module.

Figure 8: App Remote Control Overview and Hub Requirement.

Image illustrating that a Tuya ZigBee Hub is required for pairing and app control of the smart switch module.

Figure 9: Tuya ZigBee Hub is essential for smart control.

Video 1: Demonstration of wiring and app pairing for the ZigBee Smart Switch Module.

Operating Instructions

Manual Control

After installation, you can continue to use your traditional wall switch to control the connected lights or appliances. The smart module works in conjunction with your physical switch.

App Remote Control

Once paired with the Tuya Smart/Smart Life app via the ZigBee hub, you can control your lights and appliances remotely from anywhere using your smartphone.

Image showing a person using a smartphone to remotely control a light connected to the ZigBee switch module.

Figure 10: Remote control via smartphone app.

Voice Control

Integrate the module with Amazon Alexa or Google Home Assistant for hands-free voice control. Simply link your Tuya Smart/Smart Life account to your voice assistant app and use commands like "Hey Google, turn off living room light" or "Alexa, turn on the baby room light."

Image showing two people using voice commands with Amazon Alexa and Google Home devices to control lights.

Figure 11: Voice control with Alexa and Google Home.

2-Way Control Support

The module supports physical two-way control, allowing you to use two traditional switches to control the same light. This is ideal for staircases or long hallways.

Diagram illustrating how the ZigBee switch module enables 2-way control with two physical rocker switches.

Figure 12: Physical 2-way control setup.

Relay Status Setting

You can configure the module to restore its last known state (on/off) after a power outage. This prevents lights from unexpectedly turning on or off when power is restored.

Diagram showing how the relay status setting allows the smart switch module to remember its last state after a power failure.

Figure 13: Relay status setting for power outage recovery.

Timer Schedule

Set custom schedules within the app to automatically turn your lights or connected appliances on and off at specific times, such as sunrise or sunset. This feature helps automate your home and save energy.

Image showing the timer schedule feature in the app, allowing lights to turn on/off at sunrise/sunset.

Figure 14: Timer schedule for automated lighting.

Maintenance

The GIRIER Tuya ZigBee Smart Switch Module requires minimal maintenance. To ensure optimal performance and longevity:

  • Keep the module and connected switches clean and free from dust. Use a dry, soft cloth for cleaning.
  • Avoid exposing the device to extreme temperatures, high humidity, or direct water contact.
  • Regularly check for any loose wiring connections, especially during initial installation or if you experience intermittent issues. Always turn off the main power supply before checking connections.
  • Ensure your ZigBee gateway and Wi-Fi router are functioning correctly and are placed in a central location to maintain a strong signal to the switch module.
  • Periodically check the Tuya Smart/Smart Life app for firmware updates for the module and your ZigBee gateway to ensure you have the latest features and security patches.

Troubleshooting (FAQ)

Q1: What should I do if I cannot configure the switch module?
A1: Please check the following:
  • Ensure the device is powered on.
  • Verify that the ZigBee Gateway is available and online.
  • Confirm your internet connection is stable.
  • Make sure the password entered in the App is correct.
  • Double-check that the wiring is correct according to the diagrams in the Setup section.
Q2: What devices can be connected to this ZigBee switch module?
A2: Most household electrical appliances can be connected, such as lamps, laundry machines, coffee makers, and other similar devices, provided their power consumption does not exceed the module's maximum load rating.
Q3: What happens if the Wi-Fi goes off?
A3: You can still control the device using your traditional physical switch. Once Wi-Fi is active again, the device connected to the module will automatically reconnect to your Wi-Fi network.
Q4: What should I do if I change the Wi-Fi network or change the password?
A4: You will need to re-connect your ZigBee switch module to the new Wi-Fi network. Follow the pairing instructions in the App User Manual (refer to the "App Installation and Pairing" section).
Q5: How do I reset the device?
A5: You can reset the device by:
  • Powering the device on/off 5 times until the indicator light flashes.
  • Switching the traditional switch on/off 5 times until the indicator light flashes.
  • Pressing the reset key for about 10 seconds until the indicator light flashes.

User Tips

  • Ensure Neutral Wire: This module requires a neutral wire for operation. Confirm its presence in your switch box before purchasing or attempting installation.
  • Hub is Key: Remember that a Tuya ZigBee hub is mandatory for all smart features, including app control and voice commands.
  • Placement Matters: For optimal signal strength and reliability, ensure your ZigBee hub is centrally located and not obstructed by thick walls or large metal objects.
  • Compatibility Check: This module does not support dimmable bulbs, smart bulbs, or strip lights. Ensure your connected lighting is compatible.
  • Test Before Closing: After wiring, test the module's functionality (both manual and smart control) before fully securing it within the junction box.

Warranty and Support

The GIRIER Tuya ZigBee Smart Switch Module comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by improper installation, misuse, unauthorized modifications, or external factors such as power surges or natural disasters.

For technical support, troubleshooting assistance, or warranty claims, please contact GIRIER customer service through your purchase platform or the official GIRIER website. Please have your purchase receipt and product model information ready when contacting support.

For additional guides and documents, you may refer to the official product page or the provided PDF manual: User manual (PDF)

© 2024 GIRIER. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.