GEYA GEYA-HT-BOX with Copper Bar

Contents

GEYA Waterproof Electrical Distribution Box User Manual

Model: GEYA-HT-BOX with Copper Bar

1. Product Overview

The GEYA Waterproof Electrical Distribution Box is designed to safely house circuit breakers (MCBs) and electrical wiring connections in various indoor and outdoor environments. Constructed from durable PC material, it offers IP65 protection against water and dust, fire resistance, and features a transparent cover for easy inspection. This distribution box is available in multiple configurations (5-way, 8-way, 12-way, 15-way, 18-way) and includes a copper bar for efficient power distribution.

GEYA Waterproof Electrical Distribution Box, closed and open views

Figure 1: GEYA Waterproof Electrical Distribution Box (closed and open views with internal components)

2. Package Contents

  • GEYA Waterproof Electrical Distribution Box (selected way configuration)
  • Copper Bar (pre-installed or included for installation)
  • Mounting Accessories (e.g., 4 plastic expansion tubes, 4 M4*25 self-tapping screws)

3. Setup and Installation

3.1 External Features and Components

Diagram of distribution box external features

Figure 2: External Features of the Distribution Box

  • Frosted Panel: Transparent cover for visual inspection of internal components.
  • Sealing Rubber Ring: Ensures IP65 waterproof and dustproof protection.
  • Entry and Exit Holes: Pre-marked areas for cable entry and exit.
  • Mounting Holes: For securing the box to a surface.
  • Latch Design: Securely closes the cover.

3.2 Mounting Instructions

  1. Select a suitable, flat surface for mounting the distribution box.
  2. Mark the positions for the mounting holes on the chosen surface using the box as a template.
  3. Drill pilot holes at the marked positions.
  4. Insert the plastic expansion tubes (if using) into the drilled holes.
  5. Align the distribution box's mounting holes with the drilled holes and secure it using the provided self-tapping screws. Ensure the box is firmly attached.

3.3 Cable Entry and Wiring

Internal view of distribution box with circuit breaker and copper bar

Figure 3: Internal View with Circuit Breaker and Copper Bar

  1. Cable Entry: Identify the desired entry and exit points for your cables. The box features multi-ring knockout holes. Gently knock off the surface of the hole with lettering corresponding to your cable gland size.
  2. Install Cable Glands: Insert appropriate waterproof cable glands into the prepared holes to maintain IP65 rating.
  3. Install Circuit Breakers (MCBs): Mount your Miniature Circuit Breakers (MCBs) onto the DIN rail inside the distribution box.
  4. Connect Copper Bar: Ensure the copper bar is securely fastened. This bar facilitates power distribution to the MCBs.
  5. Wiring Connections:
    • Connect the main incoming live wire to the appropriate terminal on the copper bar or the first MCB.
    • Connect the outgoing live wires from each MCB to their respective loads.
    • Connect neutral wires to the neutral terminal block (marked 'N').
    • Connect ground wires to the ground terminal block (marked with the ground symbol).
  6. Circuit Baffles: Utilize the circuit baffles on the left and right sides of the face frame to organize wiring and provide partial filling. These are easily disassembled if needed.
  7. Terminal Assembly: Ensure all connections to the copper terminal assembly are tight and secure. The terminal block is designed to pass a 960°C hot wire test for safety.

Warning: All electrical work should be performed by a qualified electrician in accordance with local electrical codes and regulations.

4. Operation

Once installed and wired, the distribution box operates as a protective enclosure for your electrical components. The transparent frosted panel allows for visual inspection of circuit breaker status without opening the box. Ensure the cover is always securely latched to maintain its IP65 waterproof and dustproof rating, especially in outdoor or damp environments.

Distribution box demonstrating IP65 waterproof protection

Figure 4: IP65 Protection Level Demonstration

5. Maintenance

  • Regular Inspection: Periodically inspect the distribution box for any signs of physical damage, cracks, or loose components.
  • Sealing Integrity: Check the sealing rubber ring for any signs of wear, damage, or displacement. Ensure it forms a tight seal when the cover is closed.
  • Cleanliness: Keep the exterior of the box clean from dirt, dust, and debris. Use a soft, damp cloth for cleaning; avoid abrasive cleaners.
  • Cover Hinge: The cover hinge is designed for durability, with an opening angle of ≥115° and the ability to be fixed at its maximum open angle. The cover closure and opening life is rated for ≥2500 cycles.
  • Lock Buckle: The thickened lock positions on the face frame and cover enhance security. Ensure the latch mechanism operates smoothly.

6. Troubleshooting

  • Water Ingress: If water is found inside the box, immediately disconnect power. Check the integrity of the sealing rubber ring, ensure the cover is properly closed and latched, and verify that all cable glands are correctly installed and tightened.
  • Loose Connections: If electrical issues arise, and it's suspected to be within the box, disconnect power and carefully check all wiring connections for tightness.
  • Physical Damage: If the box sustains significant physical damage (e.g., large cracks, broken latches), it may compromise its protective capabilities. Replace the unit if its integrity is compromised.

7. Specifications

FeatureSpecification
Brand NameGEYA
Model NumberGEYA-HT-BOX with Copper Bar
Product NameHT Distribution Box with Copper Bar
MaterialPC (Polycarbonate) for bottom shell and surface frame, PC for transparent cover
FunctionFire Resistant, Waterproof, Dustproof, Anti-corrosion
Waterproof LevelIP65 (IEC 60529)
CertificationISO9001, CE
StandardIEC60529, EN60309, GB/T 17466.1, GB/T 17466.24
Available Ways5-way, 8-way, 12-way, 15-way, 18-way (other configurations may be available)
OriginMainland China
Terminal TestCopper terminal assembly passes 960°C hot wire test
Various sizes of GEYA distribution boxes with copper bars

Figure 5: Range of Distribution Box Sizes

8. User Tips

  • Always double-check that the sealing rubber ring is correctly seated and free from debris before closing the cover to ensure maximum waterproof protection.
  • When installing cable glands, ensure they are tightened sufficiently to prevent water ingress but not over-tightened to avoid damaging the box or gland.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your original seller or the manufacturer directly. Please refer to the official GEYA website or your purchase documentation for specific warranty terms and conditions.

An additional user manual in PDF format may be available for download from the seller or manufacturer's website: View User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.