Fosi Audio SW10

Contents

Fosi Audio SW10 10-Inch Powered Subwoofer User Manual

Model: SW10

1. Introduction

Thank you for purchasing the Fosi Audio SW10 Active Subwoofer.

The SW10 embodies a modern, minimalist design philosophy that blends seamlessly into various home décor styles, providing an aesthetically pleasing balance to living rooms, studies, or home theaters. Acoustically fine-tuned by Fosi Audio experienced experts, this subwoofer features a powerful built-in amplifier that delivers deep, resilient bass. Whether it's explosive scenes in movies or rhythmic beats in music, the SW10 creates an immersive audio experience that brings every moment to life. More than just a high-performance subwoofer, the SW10 is the perfect combination of style and function for modern home audio systems.

Fosi Audio SW10 Subwoofer, front view
Figure 1.1: Fosi Audio SW10 Subwoofer, front view.

2. Product Overview & Controls

Familiarize yourself with the rear panel controls and connections of your SW10 subwoofer.

Rear panel of the Fosi Audio SW10 Subwoofer showing all controls and input/output ports.
Figure 2.1: Rear panel controls and connections.
  1. Crossover Knob: Adjusts the upper frequency limit of the subwoofer's output (40Hz to 180Hz).
  2. Phase Control Knob: Adjusts the phase of the subwoofer's output (0° to 180°).
  3. Volume Control Knob: Adjusts the output volume level of the subwoofer.
  4. RCA Output Port: For connecting to another powered subwoofer or amplifier.
  5. LFE and RCA 2-in-1 Input Port: For connecting audio sources via LFE or RCA cables.
  6. Input Selector: Switches between LFE and LINE IN (RCA) input modes.
  7. EQ Switch: Selects between two equalization modes:
    • EQ1: Enhanced bass, ideal for movies and entertainment.
    • EQ2: Better bass reproduction, ideal for HiFi music listening.
  8. Auto Power Switch: Enables or disables the automatic power on/standby feature.
  9. Power Switch: Turns the subwoofer on or off.
  10. AC Input: Connects the power cable to the subwoofer.

3. Package Contents

Ensure all items are present in the package:

  • SW10 Subwoofer
  • 1.8m Power Cable
  • User Manual (this document)
Fosi Audio SW10 Subwoofer unit
Figure 3.1: Fosi Audio SW10 Subwoofer unit.

4. Setup Guide

4.1. Optimal Placement

Position the subwoofer in an optimal location, ideally near the main stereo speakers and close to a corner for enhanced bass response. Experiment with placement to find the best sound for your room.

4.2. Connecting the Subwoofer

LFE Input Connection

  1. Connect the subwoofer signal cable to the LFE input port on the back of the subwoofer.
  2. Connect the other end of the same subwoofer signal cable to the SUB OUT or LFE output of your audio source (e.g., AV receiver).
  3. Set the Input Selector switch on the subwoofer to "LFE."
  4. Plug the power cord into the AC Input on the subwoofer and then into a wall outlet. Turn the Power Switch to "ON." (It is recommended to also set the Auto Power Switch to "ON").

RCA Input Connection (LINE IN)

  1. Connect the subwoofer signal cable to the RCA input port on the back of the subwoofer.
  2. Connect the other end of the same subwoofer signal cable to the LINE OUT or RCA output of your audio source.
  3. Set the Input Selector switch on the subwoofer to "LINE IN."
  4. Plug the power cord into the AC Input on the subwoofer and then into a wall outlet. Turn the Power Switch to "ON." (It is recommended to also set the Auto Power Switch to "ON").

5. Operating Instructions

5.1. Crossover Settings

The SW10 offers a crossover range of 40Hz to 180Hz, which can be adjusted using the Crossover Knob on the back of the subwoofer. For example, when the crossover is set to 80Hz, the subwoofer will only play bass frequencies from 40Hz to 80Hz. Adjust this to blend seamlessly with your main speakers.

5.2. Auto-Power Switch

When the Auto Power Switch is activated, the subwoofer will automatically power on upon detecting an audio signal. The LED indicator will turn blue. If no audio signal is detected for 15 minutes, the subwoofer will automatically enter standby mode, and the LED indicator will turn red.

5.3. Phase Adjustment

The SW10 offers 0° to 180° phase adjustment, set using the Phase Control Knob. Due to factors like speaker placement and room reflections, low-frequency waves from main speakers and the subwoofer might not be synchronized, leading to bass cancellation. Adjusting the phase ensures the SW10 stays in phase with other speakers, enhancing the overall listening experience.

5.4. EQ Switch

Use the EQ Switch to select the sound profile that best suits your content:

  • EQ1: Provides enhanced bass, ideal for movies and entertainment, delivering a more impactful low-end.
  • EQ2: Offers better bass reproduction, optimized for HiFi music listening, providing a more accurate and nuanced bass response.

6. Specifications

FeatureSpecification
Speaker StructureDown-firing Active Subwoofer with Built-in Amplifier Driver
Driver10-inch Polypropylene Cone with Rubber Surround
InputRCA, LFE
Power OutputRMS 200W
Frequency Response35Hz–180Hz
Dimensions360mm x 360mm x 400mm (14.17 x 14.17 x 15.75 in)
Weight14 kg
Auto-Power FeatureSupported
Power SupplyAC 100-240V ~50/60Hz, 200W

7. Maintenance

To ensure the longevity and optimal performance of your Fosi Audio SW10 subwoofer, follow these simple maintenance guidelines:

  • Cleaning: Keep the subwoofer clean and free from dust. Use a soft, dry, lint-free cloth to wipe down the cabinet. Avoid using liquid cleaners, abrasive pads, or chemical solvents, as these can damage the finish.
  • Placement: Avoid placing the subwoofer in direct sunlight, near heat sources, or in areas with high humidity, as these conditions can affect its performance and lifespan.
  • Ventilation: Ensure adequate ventilation around the subwoofer to prevent overheating. Do not block any vents or place the unit in an enclosed space without proper airflow.
  • Handling: Handle the subwoofer with care. Avoid dropping it or subjecting it to strong impacts, which can damage internal components.

8. Troubleshooting

8.1. No Power

  1. Ensure the subwoofer is connected to a reliable power source.
  2. Verify that the power switch is set to ON.
  3. Check that the power indicator light is illuminated (blue for operation, red for standby).

8.2. No Sound Output

  1. Confirm the subwoofer is powered on, indicated by a blue LED.
  2. Check whether the connection cables are correct and securely plugged in.
  3. Verify that the audio source is outputting sound properly.
  4. Check whether the volume control knob on the subwoofer is set too low.

8.3. Distorted Sound

  1. Check for proper phase alignment using the Phase Control Knob.
  2. Inspect the driver unit for any visible damage.

8.4. How to Adjust Volume or Crossover?

Volume and crossover frequency can be adjusted using their respective knobs on the back of the SW10.

8.5. What is Auto Power?

When in standby mode, the unit will automatically switch to working mode when an audio signal is detected. When operating, the unit will automatically enter standby mode if no audio signal is detected for 15 minutes.

8.6. What is Phase Adjustment?

It is used to synchronize the sound waves of the subwoofer and the main speakers, achieving fuller and more powerful bass performance.

8.7. What do the LED Status Indicators Mean?

Blue indicates normal operation, while red signifies that the device is in standby status.

8.8. What is the RCA output interface used for?

The RCA output provides a line-level audio signal, typically used to connect a second powered subwoofer for enhanced bass. It can also connect to an amplifier or active speaker, offering an extra signal path when there is no dedicated subwoofer output.

9. User Tips

  • Room Acoustics: The placement of your subwoofer significantly impacts sound quality. Experiment with different positions in your room, especially corners or near main speakers, to find the optimal spot for balanced bass.
  • Crossover Tuning: Adjust the crossover frequency carefully to ensure a smooth transition between your main speakers and the subwoofer. A good starting point is often slightly above the lowest frequency your main speakers can reproduce.
  • Phase Alignment: If your bass sounds weak or muddy, try adjusting the phase control. Small adjustments can make a big difference in how the subwoofer integrates with your other speakers.

10. Warranty & Support

10.1. Warranty Information

Fosi Audio pledges to give a 24-month limited warranty and support from the date of purchase. If you encounter any problem when using our product, please contact our support team.

10.2. Contact Support

For any inquiries, technical support, or warranty claims, please contact Fosi Audio support:

For a complete digital copy of this manual, please refer to the PDF document available at: Fosi Audio SW10 User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.