KAK Door Viewer Camera User Manual

1. Product Overview

The KAK Door Viewer Camera is a smart digital peephole system designed to enhance home security. It features 1080P Full HD video, Wi-Fi connectivity for remote access via the Tuya SmartLife APP, PIR motion detection, night vision, and two-way audio communication.

1.1 Package Contents

• 1x Outdoor unit (Peephole Camera)
• 1x Indoor unit (LCD Display)
• 1x Metal bracket
• 1x User manual
• 1x USB charging cable

1.2 Component Identification

2. Setup Instructions

2.1 Physical Installation

1. Ensure your door thickness is between 35-120mm for proper fit.
2. Remove your existing peephole.
3. Insert the outdoor unit through the peephole hole from the outside of the door.
4. From the inside, connect the FPC (Flexible Printed Circuit) cable of the outdoor unit to the female connector on the back of the indoor unit.
5. Secure the indoor unit to the door using the provided metal bracket and screws.

2.2 Device Addition and Network Configuration (Tuya SmartLife APP)

Follow these steps to connect your KAK Door Viewer Camera to the Tuya SmartLife APP:

1. Download and open the Tuya SmartLife App on your mobile device.
2. In the app, click "Add Device".
3. Select "Camera & Lock" from the product catalog on the left.
4. Then, select "Smart Doorbell" from the product type list on the right.
5. Take out the fully assembled device. Turn on the "Power switch key" on the indoor unit.
6. Press and hold the "Reset key" for 8 seconds until you hear a prompt tone "system reset".
7. Wait for another 5 seconds until you hear the prompt tone "the device is ready to pair". The blue indicator light should now be flashing quickly.
8. Return to the App interface. Confirm "Make sure the indicator light is flashing quickly or a prompt tone is heard" and click "Next".
9. Select your 2.4GHz Wi-Fi network from the WLAN list and enter the password. Click "Next".

   Important Wi-Fi Note: This doorbell operates exclusively on 2.4GHz Wi-Fi. If your router is 5GHz-only, it will not be compatible. If your router supports both 2.4GHz and 5GHz (mixed mode), ensure the 2.4GHz band is enabled and connect the doorbell to it.

10. Aim the doorbell camera at the QR code displayed on your phone screen, keeping it approximately 10cm away, to scan the code and bind the device.
11. Once you hear the prompt tone "Paring information received", click "I heard a prompt" in the app.
12. The app will proceed to "Adding device". Upon successful addition, you will see a confirmation message.

3. Operating Instructions

3.1 Real-time Monitoring and Two-Way Audio

• Access the live feed from your doorbell camera anytime via the Tuya SmartLife APP.
• Use the built-in microphone and speaker for two-way communication with visitors at your door.

3.2 PIR Motion Detection

• The integrated PIR sensor detects motion near your door.
• Upon detection, the device will send instant notifications to your connected mobile phone via the Tuya SmartLife APP.
• This feature provides 24-hour protection and alerts you to any suspicious activity.

3.3 Night Vision

• The camera is equipped with HD clear night vision capabilities.
• It automatically switches to night mode in low-light conditions, ensuring clear visibility even in complete darkness.

3.4 Intelligent Playback and Recording

• The device supports recording to a TF card (not included) or cloud storage (subscription may be required).
• Review recorded events and playback footage directly from the Tuya SmartLife APP.

4. Maintenance

4.1 Battery Charging

• The indoor unit is powered by a 5000mAh battery, offering up to 180 days of standby time.
• Charge the indoor unit using the provided USB cable and a standard USB power adapter (not included) via the Type-C charging port.
• A low battery indicator will appear on the LCD screen and in the app when charging is required.

4.2 TF Card Management

• Insert a TF card (MicroSD card) into the TF Card slot on the indoor unit for local video storage.
• Ensure the card is formatted correctly (FAT32 recommended) for optimal performance.
• Regularly check the storage capacity and back up important footage as needed.

4.3 Cleaning

• Wipe the camera lens and LCD screen with a soft, dry, lint-free cloth.
• Avoid using harsh chemicals or abrasive materials that could damage the surfaces.

5. Troubleshooting

• Device not powering on: Ensure the power switch key is in the ON position and the battery is charged.
• Indicator light not flashing quickly during pairing: Press and hold the "Reset key" for 8 seconds until you hear "system reset", then wait for "device is ready to pair".
• Unable to connect to Wi-Fi:
  • Confirm your Wi-Fi network is 2.4GHz. The device does not support 5GHz-only networks.
  • Ensure the Wi-Fi password is entered correctly.
  • Move the device closer to your Wi-Fi router to improve signal strength.
• No motion detection alerts: Check the PIR sensor for obstructions. Ensure motion detection is enabled in the Tuya SmartLife APP settings.
• Poor video quality: Clean the camera lens. Ensure adequate lighting (night vision should activate automatically in low light).
• No audio during two-way communication: Check microphone and speaker settings in the app. Ensure volume is not muted.

6. Specifications

7. User Tips

• Optimal Wi-Fi Signal: For best performance, ensure your doorbell camera is installed within a good range of your 2.4GHz Wi-Fi router.
• Regular Battery Checks: Monitor the battery level via the app and recharge promptly to avoid interruptions in security monitoring.
• TF Card Maintenance: If using a TF card for storage, periodically review and clear old footage to ensure continuous recording capacity.
• App Notifications: Customize your notification settings in the Tuya SmartLife APP to receive alerts that are most relevant to you.

8. Warranty and Support

For detailed guides and further assistance, please refer to the official user manual PDF:

View User Manual (PDF)

If you encounter any issues or require technical support, please contact the seller or manufacturer directly through your purchase platform for assistance.