Introduction
Thank you for choosing the NieNie Model 8830 Digital Alarm Clock. This device combines multiple functions including a perpetual calendar, dual alarms with snooze, temperature and humidity display, and countdown/count-up timers. This manual provides detailed instructions to help you set up and operate your new clock effectively.
For a downloadable version of this manual, please refer to the official PDF: User Manual (PDF)

Figure 1: Front view of the NieNie Model 8830 Digital Alarm Clock (Black variant).
Main Functions Overview
- Perpetual Calendar (Year, Month, Day, Day of the Week)
- Temperature Display (Fahrenheit/Celsius)
- Humidity Display
- Dual Alarms with 3 Working Modes (Mon-Fri, Mon-Sat, Everyday)
- Snooze Function (5-minute interval, unlimited)
- 3 Volume Levels for Alarms
- 7 Alarm Melodies
- Key Lock Function
- Daylight Saving Time (DST) Setting
- 12/24-Hour Format Switch
- Light Sensor for Automatic Backlight Adjustment
- Countdown Timer (Max 99 minutes 59 seconds)
- Count-up Timer
- Low Battery Indicator
Setup
Package Contents
- NieNie Model 8830 Digital Alarm Clock
- User Manual
Power Supply and Battery Installation
The clock requires two (2) AA batteries for primary operation and one (1) CR2032 button cell battery for memory backup (to retain settings during power outages). Batteries are not included.

Figure 2: Size information and battery requirements.
- Open the battery cover located on the back of the clock.
- Insert two (2) AA batteries into the battery compartment, ensuring correct polarity (+/-).
- Locate the CR2032 button cell compartment. If present, remove the insulation tab from the pre-installed CR2032 battery. If not present, insert one (1) CR2032 battery with the positive side facing up.
- Close the battery cover securely.
Note: The CR2032 battery is solely for powering the chip and retaining settings; it cannot power the clock for display or alarm functions.
Operating Instructions
Button Layout
The clock features several buttons on the top for various functions:
- SET: Enter setting mode.
- UP/DOWN Arrows: Adjust values.
- CLEAR: Clear settings or reset.
- M (Mode): Switch between modes.
- S (Snooze/Mode/Light): Activate snooze, switch modes, or turn on backlight.
- Alarm 1 Icon: Alarm 1 control.
- Alarm 2 Icon: Alarm 2 control.
- DST Icon: Daylight Saving Time control.
Time Mode and Countdown Mode Switching
- Press and hold the SNOOZE/MODE/LIGHT button for 3 seconds to switch between Time mode and Countdown mode.
- In Time Mode, the screen displays time, date, day of week, temperature, and humidity.
- In Countdown Mode, the screen displays the timer.
Setting Year, Month, Day, Hour, and Minute
(All settings must be configured in Time Mode)
- Press and hold the SET button for 3 seconds until the