seediq W9003

Contents

Seediq W9003 LED Bathroom Wall Lamp Instruction Manual

Model: W9003

1. Introduction

Thank you for purchasing the Seediq W9003 LED Bathroom Wall Lamp. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

2. Safety Information

  • Warning: Do not use the power supply beyond the specified range (100-240V, 50Hz).
  • Warning: Cut off the power before installation to prevent electric shock.
  • Avoid scratching the lamp and wires during installation.
  • Installation should be performed by a qualified electrician or in accordance with local electrical codes.
  • Ensure the mounting surface can support the weight of the fixture.
  • Do not attempt to modify the fixture in any way.

3. Package Contents

Please check that all components are present and undamaged:

  • LED Wall Lamp Fixture (Model W9003)
  • Mounting Base
  • Mounting Hardware (screws, wall anchors, wire connectors)
  • Instruction Manual (this document)
Bag of mounting hardware including screws, wall anchors, and wire connectors.
Figure 1: Included mounting hardware.

4. Installation

Follow these steps for proper installation:

  1. Step 1: Fix the Base to the Wall

    Position the mounting base on the desired location on the wall. Mark the drilling points. Drill holes and insert wall anchors if necessary. Secure the base to the wall using the provided screws.

    Diagram showing the mounting base being fixed to the wall with screws.
    Figure 2: Step 1 - Fixing the base to the wall.
  2. Step 2: Connect the Wires

    Ensure the power is OFF at the circuit breaker before proceeding. Connect the household electrical wires to the lamp's wires. Typically, the brown wire (L) connects to the live wire, and the blue wire (N) connects to the neutral wire. If a ground wire is present, connect it to the fixture's ground terminal. Use the provided wire connectors to secure the connections.

    Close-up of the lamp's wiring connections, showing blue and brown wires.
    Figure 3: Wiring connections (L and N indicated).
    Close-up of the lamp's base with mounting bracket and wiring, showing where wires connect.
    Figure 4: Lamp base with internal wiring connections.
  3. Step 3: Put the Light on the Base

    Carefully align the lamp fixture with the installed mounting base. Secure the lamp to the base using the appropriate screws or locking mechanism.

  4. Step 4: Turn On

    Once the lamp is securely mounted and wired, restore power at the circuit breaker. The lamp is now ready for use.

White Seediq W9003 LED Bathroom Wall Lamp installed above a mirror, emitting bright light.
Figure 5: Installed white LED wall lamp.
Black Seediq W9003 LED Bathroom Wall Lamp installed above a mirror, with a person looking into the mirror.
Figure 6: Installed black LED wall lamp.

5. Operation

The Seediq W9003 LED Wall Lamp is designed for simple operation.

  • Power On/Off: Use your standard wall switch to turn the lamp on or off.
  • Color Temperature Adjustment: This lamp features multiple color temperature settings (Warm White, Natural Light, Cool White). To cycle through these settings, quickly toggle your wall switch OFF and then ON again. Each toggle will change the light to the next available color temperature.
Three images showing the lamp emitting white light, natural light, and warm light, demonstrating color temperature options.
Figure 7: Lamp displaying different color temperatures.

Video 1: Demonstration of the lamp's color temperature changing feature.

6. Maintenance

  • Cleaning: To clean the lamp, ensure the power is off. Use a soft, dry cloth to wipe the surface. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by drying with a clean, dry cloth. Do not use abrasive cleaners or solvents.
  • LED Light Source: The LED light source is integrated and not user-replaceable. If the LEDs fail, the entire fixture may need to be replaced.

7. Troubleshooting

Problem Possible Cause Solution
Lamp does not turn on. No power supply; Loose wiring; Faulty switch. Check circuit breaker. Ensure wiring connections are secure (refer to Installation section). Test the wall switch.
Light flickers. Loose wiring; Incompatible dimmer switch (if applicable, though this model is not dimmable). Check wiring connections. Ensure no dimmer switch is used with this non-dimmable fixture.
Color temperature does not change. Incorrect switching sequence. Ensure you are quickly toggling the wall switch OFF and ON to cycle through modes.

8. Specifications

Feature Specification
Model NumberW9003
Brand Nameseediq
Item TypeWall Lamps
Light SourceLED (Bulbs Included)
Luminous Flux249-2000 lumens
Color TemperatureWarm White (2700-3500K), Cool White (5500-7000K)
Is DimmableNo
Power SourceAC
Voltage90 - 260 V
MaterialAluminum (Body Material)
Shade TypePlastic
Shade DirectionDown
Installation TypeWall Mounted, Self-contained
Application AreasKitchen, Dining Room, Bed Room, Foyer, Study, Bathroom
StyleModern Style
TechnicsPainted
CertificationCE, ROHS
OriginMainland China
Package Length81 cm
Package Width11 cm
Package Height4 cm
Package Weight0.56 kg

9. User Tips

  • Many users appreciate the aesthetic appeal and good quality of this lamp.
  • The lamp is noted for being beautiful and easy to clean, contributing to its overall positive reception.
  • Before purchasing, consider the dimensions carefully to ensure it fits your intended space, especially for mirror or vanity applications.

10. Warranty & Support

For any questions, issues, or support needs regarding your Seediq W9003 LED Bathroom Wall Lamp, please contact customer service.

You can also refer to the official user manual in PDF format for additional details:

View User Manual (PDF)

© 2024 Seediq. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.