1. Safety Warnings & Important Information
WARNING: Keep out of reach of children. In case of ingestion, seek medical attention immediately.
WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
- Handle with care to avoid cuts or injuries, especially with sharp components.
- Keep away from children unless supervised by an adult.
Compliance Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Country of Origin: Mainland China
Manufacturer: ShenZhen Tungfull Digital Technology Co., Ltd
2. Setup Instructions
Before first use, ensure all protective films are removed from the device.
Assembly Guide
Watch this video for a visual guide on assembling your chainsaw:
Video: Step-by-step assembly of the cordless chainsaw.
Follow these steps to assemble your chainsaw:
- Disassemble Cover: Use a screwdriver to remove the screws and the red cover plate from the chainsaw body.
- Install Chain: Carefully place the saw chain into the groove of the guide plate. Ensure the chain teeth are facing the correct direction for cutting.

Image: All chainsaw components laid out before assembly.
- Attach Chain to Sprocket: Hook the chain onto the sprocket located on the chainsaw body.
- Reattach Cover: Place the red cover plate back onto the chainsaw body and tighten the screws securely.
- Install Safety Guard: Remove the screw at the front of the chainsaw body. Attach the black safety guard panel to the front, aligning it with the screw hole. Reinsert and tighten the screw to secure the guard.

Image: Close-up of the lock switch, quenched chain, and safety guard panel.
- Adjust Chain Tension: Locate the screw on the side of the chain guide. Use the provided tool to adjust the screw, ensuring the chain is not too tight or too loose. The chain should have a slight give when pulled.
- Insert Battery: Once assembled, insert a compatible 21V Makita-style lithium battery into the battery slot until it clicks into place. (Note: Battery is not included and sold separately).
3. Operating Instructions
This chainsaw features an upgraded brushless motor for increased torque output, making it suitable for various wood cutting needs.
- Power On: Press and hold the power button for approximately 3 seconds to turn on the device.
- Change Modes: Short press the power button to cycle through different operating modes (if applicable).
- Safety Lock: The chainsaw is equipped with a safety protection switch to prevent accidental startup. Ensure the safety lock is disengaged before operating and engaged when not in use.
- Cutting: Hold the chainsaw firmly with both hands. Position the chain saw against the material to be cut and press the trigger. Allow the saw to do the work; do not force it.
- Power Off: Press and hold the power button again to turn off the device after use.
4. Maintenance
- Chain Lubrication: Regularly apply chain oil to the saw chain to ensure smooth operation and prolong its lifespan. Ensure the oil is applied before first use.
- Chain Tension: Periodically check and adjust the chain tension. The chain should not be too tight or too loose to prevent damage and ensure efficient cutting.
- Cleaning: After each use, clean the chainsaw body, guide plate, and chain to remove sawdust, debris, and resin. This helps maintain performance and prevents buildup.
- Storage: After use, turn off the device and store it in a dry place, away from children.
5. Troubleshooting
- Chainsaw not starting: Ensure the battery is fully charged and correctly inserted. Check that the safety protection switch is disengaged.
- Chain not moving smoothly: Check chain tension and adjust if necessary. Ensure the chain is properly lubricated. Inspect the chain for any damage or dullness.
- Reduced cutting performance: The chain might be dull and require sharpening or replacement. Ensure the battery has sufficient charge.
- Unusual noises or vibrations: Immediately stop operation. Check for loose parts, chain tension, or any obstructions. If the issue persists, contact customer support.
6. Specifications
The LanxStar Cordless Mini Li-Ion Electric Chainsaw is available in 12-inch and 16-inch models.

Image: Comparison of 12-inch and 16-inch chainsaw models with detailed specifications.
| Feature | 12-inch Model | 16-inch Model |
|---|---|---|
| Power Source | Battery (21V Makita compatible, not included) | |
| Saw Type | Chain Saw | |
| Power | 1000W | 1000W |
| Output Power | 1500W | 1500W |
| No-Load Speed | 22000 rpm | 22000 rpm |
| Dimensions | 35.5 x 16 x 16 cm | 46 x 16 x 15 cm |
| Weight (approx.) | 2.459 kg (packaged) | 2.459 kg (packaged) |
| Battery Included | No | |
| High-concerned chemical | None | |
7. User Tips
- Always apply chain oil before using the chainsaw for the first time and regularly thereafter to ensure optimal performance and longevity.
- Proper maintenance, including regular cleaning and chain tension checks, is key to ensuring the product lasts a long time and performs well.
- This chainsaw offers excellent value for its price range, providing strong power output for various cutting tasks.
8. Frequently Asked Questions (FAQ)
- Q: Does it come with a charger and batteries or just the saw?
- A: The chainsaw is sold without a battery or charger. These items must be purchased separately.
9. Warranty & Support
For any product-related inquiries, technical support, or warranty claims, please refer to the official seller's contact information or the platform's customer service.
An electronic version of the user manual (PDF) is available for download: View User Manual (PDF)