wofea WG-088

Contents

Wofea Smart WiFi Garage Door Opener Switch Controller Instruction Manual

Model: WG-088

1. Product Overview

The Wofea Smart WiFi Garage Door Opener Switch Controller allows you to remotely control your garage door using a smartphone app or voice commands via smart assistants like Amazon Alexa and Google Home. This device integrates with your existing wired garage door opener to provide smart functionality.

Wofea Smart WiFi Garage Door Opener Controller with various plug types, app logos, and voice assistant icons.

Figure 1: Wofea Smart WiFi Garage Door Controller and its features.

Wofea Smart Garage Controller with EU plug, sensor, and connecting cables.

Figure 2: Wofea Smart Garage Controller (EU plug version) with included sensor and cables.

2. Setup and Installation

2.1. Pre-Installation Checklist

  • Your smartphone or tablet must be connected to a 2.4G WiFi network with internet access.
  • The device only supports 2.4G Wi-Fi. If you use a 5G router (providing both 5G and 2.4G signals), select the 2.4G WiFi to connect your smartphone.
  • Download either the "Tuya Smart" APP or "Smart Life" APP from your device's app store.
  • During the pairing process, ensure your iOS or Android device and the Garage controller are within the range of your WiFi router.
  • Ensure your router is MAC-open. If not, disable MAC filtering temporarily.

2.2. Test Device for Opener Compatibility

  1. Power up the garage controller.
  2. Use the included Red & Black wire to connect the device to your opener. Connect each end to the same terminals where the wall button wires are terminated.
  3. Use a tiny screw or nail to click the button on the device; your garage door should activate.
Wiring diagram for garage door opener compatibility test, showing controller connected to motor unit and wall console.

Figure 3: Wiring for compatibility test. The motor and wall console are not included.

Note: If this test fails, your device may not be compatible. For further instructions or compatible models, refer to the user manual PDF or contact support.

2.3. Easy Installation Steps

Important: Perform these installation steps after you have successfully added the device to your app and ensured your garage door is closed.

  1. Power up: Connect the garage controller to power.
  2. Connect to the wall console: Insert the Red & Black wires (2.0mm terminal) into the garage controller, then connect each end to the same terminals where the wall button wires are terminated on your garage door opener.
  3. Connect to the garage door sensor: Insert the 2.0mm terminal of the sensor to the garage controller. Then, securely install the sensor and the magnet with a gap of 3mm to 15mm on your garage door. Use screws, brackets, 3M adhesive, wall nails, or line holders as appropriate.
Diagram showing installation of the garage door sensor and magnet on the wall and garage door, with a 3-15mm gap.

Figure 4: Sensor installation details. Ensure a 3-15mm gap between the sensor and magnet.

2.4. Add Device to App

Note: The garage door will activate when successfully added (when the blue LED stops blinking), so ensure your door is closed first.

  1. Power up the garage controller. Press and hold the ON/OFF button until the blue light flashes.
  2. Ensure your smartphone is connected to your WiFi network and has Bluetooth enabled.
  3. Launch the "Tuya Smart" or "Smart Life" APP. Tap the "+" icon in the top right corner.
  4. The app will auto-discover the device. Select "Electrical" > "Garage door opener (Wi-Fi)".
  5. Choose your 2.4G WiFi network and enter its password. Tap "Confirm".
  6. Tap "Confirm indicator rapidly blink" (this step is ignored if the device is auto-discovered).
  7. The app will automatically connect to the device. Once complete, you will be prompted to rename the device. Enter a new name and save.

3. Operating Instructions

Once installed and configured, you can control your garage door via the app or voice commands.

3.1. App Control

Open the "Tuya Smart" or "Smart Life" app. Select your garage door device. You will see an interface to open, close, and monitor the status of your garage door. The app also allows you to set schedules and countdown timers for opening/closing.

Video 1: Demonstration of app control, Alexa, and Google Home voice control for the garage door opener.

3.2. Voice Control with Amazon Alexa

To enable Alexa control, you need to link your "Tuya Smart" or "Smart Life" account with Alexa.

  1. Open the Alexa App, tap on the menu (upper left corner), and go to "Skills & Games".
  2. Search for "Tuya Smart" or "Smart Life" and select the skill.
  3. Enable the skill.
  4. Enter your account information (phone number or email) and log in to link your account to your Amazon account.

Voice Commands:

  • "Alexa, Open [device name]"
  • "Alexa, Close [device name]"
  • "Alexa, Is [device name] open?"

Note: For security, Alexa may ask for a voice code or PIN to open the garage door.

3.3. Voice Control with Google Home

To enable Google Home control, you need to link your "Tuya Smart" or "Smart Life" account with Google Home.

  1. Launch the Google Home app, tap the menu, then "Home control".
  2. Under "Devices", tap the "+" icon.
  3. Tap "Tuya Smart" or "Smart Life".
  4. Enter your account information (phone number or email) and log in to link your account to your Google account.

Voice Commands:

  • "Hey Google, turn on [device name]" (to open)
  • "Ok Google, turn off [device name]" (to close)

Note: When linking with Google Home, ensure you turn on the voice control switch in the app settings (under "set" button) and set a password for Google Home. Google will ask for this PIN code when opening your garage.

4. Maintenance

  • Keep the device clean and free from dust.
  • Periodically check all wiring connections to ensure they are secure.
  • Ensure your Wi-Fi network is stable for optimal performance.

5. Troubleshooting

  • Device not responding: Check if the device is powered on and the blue LED is active. Ensure your Wi-Fi network is working and the device is within range.
  • Garage door not activating during compatibility test: The device may not be compatible with your garage door opener. Consult the full user manual PDF or contact customer support.
  • App connection issues: Verify your smartphone is connected to a 2.4GHz Wi-Fi network. Restart your router and the garage controller.
  • Voice control not working: Ensure your smart assistant account is correctly linked to your "Tuya Smart" or "Smart Life" account. Check the device name in the app and use it precisely in voice commands.

6. Specifications

FeatureSpecification
Brand Namewofea
Model NumberWG-088
OriginMainland China
CertificationCE
Encoding MethodFixed code
Wi-Fi Network2.4GHz IEEE802.11b/g/n
APP NameTuyasmart & Smart Life
Wired Door Sensor Length5m
Power InputAC100-240V
Voice ControlSupport Google Home & Alexa
Feature 1Open/close Garage by phone
Feature 2Open/close Garage by Schedules
Feature 3Open/close Garage by Countdown

7. User Tips

  • The most challenging part of the installation can be precisely positioning the door sensors to detect open/closed states. Take your time with this step.
  • The device integrates seamlessly with both the Smart Life app and Home Assistant for broader smart home compatibility.
  • Utilize the notification features in the app to receive alerts when your garage door is opened or closed, enhancing security and peace of mind.

8. Warranty and Support

For any compatibility issues, technical support, or warranty inquiries, please refer to the full user manual PDF provided with your product or contact the manufacturer directly through their official channels. Thank you for purchasing the Wofea Smart WiFi Garage Door Controller.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.