VASTFIRE Headlamp

Contents

VASTFIRE Headlamp User Manual

Model: Headlamp

1. Introduction

Thank you for choosing the VASTFIRE Headlamp. This USB rechargeable LED sensor flashlight features XPE and COB lights, offering versatile illumination for various outdoor activities. Made from high-quality ABS material, it is lightweight, durable, and designed for comfort and ease of use.

Key Features:

  • Ultra-bright LED and COB lamps
  • Rechargeable design with Type-C charging
  • Wave induction (motion sensor) for hands-free operation
  • Impact resistance
  • 230° large floodlight for wide coverage
  • Comfortable silicone construction and adjustable headband

This headlamp is suitable for activities such as daily moving, cave exploration, patrol, camping, teaching, hunting, hiking, searching, night fishing, and night cycling.

Three VASTFIRE headlamps showing COB and LED lights, with Type-C charging cables and motion sensor icon.

Figure 1: VASTFIRE Headlamp overview, showing multiple units and charging cables.

2. Package Contents

Please check the package for the following items:

  • 1 x VASTFIRE Headlamp
  • 1 x Type-C Charging Cable
  • 1 x Instruction Manual

3. Specifications

FeatureSpecification
Product NameOutdoor Induction COB Headlight USB Charging Headlight LED Strong Light Headlight
BrandVASTFIRE
ColorBlack
Voltage3.7V
Power10W
Lamp BeadsCOB + XPE LED
Lumen OutputMain light: 350lm, Auxiliary light: 105lm
Charging MethodType-C USB Charging
Battery TypeBuilt-in Lithium Battery
Battery Capacity1000mAh
Charging TimeApproximately 4 hours
Service Life3-12 hours (depending on mode)
Lighting Modes5-level dimming (COB high/COB low/XPE high/XPE low/COB and XPE flashing)
Maximum Range200-500 meters
Packaging Size57 x 49 x 108 mm
Packaging Weight127.4 grams
Diagram showing the dimensions of the headlamp: 33.5cm length, 3cm width, 4.5cm height.

Figure 2: Headlamp dimensions.

4. Setup

4.1 Charging the Headlamp

Before first use, fully charge the headlamp. The device features a built-in rechargeable lithium battery and supports Type-C charging.

  1. Locate the Type-C charging port on the side of the headlamp.
  2. Open the protective cover of the charging port.
  3. Connect the provided Type-C charging cable to the headlamp and a suitable USB power source (e.g., power bank, wall charger, car charger, computer).
  4. The charging indicator light will illuminate (typically red) during charging and change color (or turn off) when fully charged.
  5. Charging time is approximately 4 hours.
Detailed diagram of the headlamp components including XPE LED, COB LED, Sensor switch, ON/OFF button, Power display, Sensor light, Adjustment buckle, Reflective band, and Type-C charging port.

Figure 3: Product details and Type-C charging port location.

4.2 Adjusting the Headband

The headlamp features an adjustable headband for a comfortable and secure fit.

  1. Place the headlamp on your head.
  2. Use the adjustment buckle on the headband to tighten or loosen it until it fits snugly without being too tight.

Video 1: Product demonstration showing adjustable headband, light modes, and motion sensor.

5. Operating Instructions

5.1 Power On/Off and Light Modes

The headlamp has a dual switch design: a power switch and a sensor switch.

  1. To Turn On/Off: Press the power switch (ON/OFF button) to turn on the light. Press it again to cycle through modes or turn off.
  2. Light Modes: The headlamp offers 5-level dimming:
    • COB High Light Mode
    • COB Low Light Mode
    • XPE LED High Light Mode
    • XPE LED Low Light Mode
    • COB and XPE LED Strobe Mode (long press the power switch to activate)
Diagram showing five lighting modes: COB High, COB Low, LED High, LED Low, and LED+COB Strobe.

Figure 4: Illustration of the five available lighting modes.

Comparison of LED spotlight and COB floodlight illumination patterns from the headlamp.

Figure 5: Comparison of LED spotlight and COB floodlight.

5.2 Motion Sensor Mode

The motion sensor allows for hands-free control of the light.

  1. Activate Sensor Mode: Long press the sensor switch (Induction mode switch) for 3-5 seconds until the light turns on in sensor mode.
  2. Hands-Free Operation: Once activated, you can turn the light on or off by simply waving your hand in front of the sensor.
  3. Exit Sensor Mode: Long press the sensor switch again to exit the motion sensor mode.
Image showing a person activating the motion sensor mode by waving a hand near the headlamp.

Figure 6: Activating and using the motion sensor mode.

6. Maintenance

  • Water Exposure: Although the headlamp is waterproof, prevent the battery compartment from getting wet to ensure longevity and proper function.
  • Cleaning: Wipe the headlamp with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
  • Storage: Store the headlamp in a cool, dry place away from direct sunlight when not in use for extended periods.
  • Battery Care: Recharge the battery regularly, even if not in frequent use, to maintain battery health.
Image of the headlamp being splashed with water, illustrating its waterproof design, with a person climbing in the background.

Figure 7: Headlamp demonstrating waterproof capabilities.

7. Troubleshooting

ProblemPossible Solution
Light does not turn onCheck the battery level and ensure it is charged. Verify the charging status.
Unable to adjust brightnessRestart the device by turning it off and on again. If the issue persists, try resetting the device (refer to the operating instructions for specific reset procedures if available, otherwise, fully discharge and recharge).
Motion sensor not respondingEnsure the motion sensor mode is activated by long-pressing the sensor switch. Check for any obstructions in front of the sensor.

8. User Tips

  • The headlamp is very light, making the hands-free feature particularly convenient for tasks requiring both hands.
  • It remains comfortable even after extended wear, with users reporting no headaches after wearing it for an entire day.
  • The motion sensor is a highly appreciated feature for quickly turning the light on and off without fumbling for buttons.
  • The battery generally lasts comfortably for a whole day of lighting, depending on the mode used.
  • Consider wearing it on your waist for specific tasks, such as auto repair work, to illuminate hard-to-reach places.
Images showing the headlamp being worn comfortably in various scenarios like observing, operating, and general use.

Figure 8: Headlamp comfort and versatility in use.

Illustration demonstrating the 230-degree wide beam of the headlamp compared to a narrower beam from another light.

Figure 9: Wide beam illumination for enhanced visibility.

9. Warranty and Support

For any issues, questions, or concerns regarding your VASTFIRE Headlamp, please contact customer service for assistance.

You can also refer to the official user manual PDF for additional information: View User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.