HOMEFISH SD130

Contents

Airbrush Model SD130 Multi-Purpose Dual-Action Gravity Feed Spray Gun Set

User Manual

1. Product Overview

Important Declaration

  1. This product is a general cross-border tool, complying with target market safety standards. Confirm the product model and specification match the usage scenario before use to avoid damage or safety hazards from misuse.
  2. Strictly follow this guide for installation, operation and maintenance. Do not disassemble or modify core components without authorization. The manufacturer is not liable for product failure, personal injury or property loss caused by improper operation.
  3. The package includes the tool main body and supporting accessories. Accessories may shift during cross-border transportation. Check the component list immediately after unpacking; contact the dealer or after-sales service if any part is missing or damaged.
  4. Platform Compliance Reminder: The seller strictly adheres to the product compliance laws of the sales destination country and platform rules.

1.1 Product Name

Spray Gun

1.2 Product Purpose & Usage Restrictions

This professional spray gun is made of high-quality alloy and engineering plastic, with a sturdy and durable body that can withstand long-time working without damage. It is equipped with a precise adjustment valve, allowing you to freely control the spray flow, atomization area, and spray distance to meet the spraying requirements of different materials and areas.

Note: Accessories are configured according to tool type. For special supporting parts or extended accessories, purchase separately and confirm compatibility.

Package Contents:

  • Tool Main Body x 1
  • Matching Accessories (Adapters/Sockets) x [Quantity]
  • Spare Parts (if applicable) x [Quantity]
  • Storage Bag/Box x 1
  • Manual x 1
  • Warranty Card x 1
Airbrush Model SD130 with wrench and dropper
Figure 1: Overview of the Airbrush Model SD130 set, including the main body, wrench, and dropper.

2. Safety Precautions

3.3 Safety Precautions / Warning

Warning: Strictly follow the following safety specifications to avoid personal injury and property loss.

  • Do not overload or use the tool beyond its specifications.
  • Wear protective gloves and goggles during operation to prevent hand scratches and injury from splashing debris.
  • Do not use the tool as a hammer or crowbar to avoid breakage.
  • Minors are prohibited from using the tool.
  • Adults must stay focused during operation and are strictly forbidden to work under the influence of alcohol or fatigue.
  • For more safety warning standards, refer to "AliExpress Guidelines on Compliance of Warning Information for Products Sold to the EU".
  1. Inspect the tool's appearance before use. Immediately stop using and contact after-sales service for inspection and repair if the handle is cracked, parts are deformed, or movable parts are jammed.
  2. Maintain a correct posture during operation to avoid rebound injury caused by uneven force. Never operate heavy tools with one hand.
  3. Clean and maintain the tool promptly after use. Store it in a dry, ventilated place and take anti-fall and anti-pressure measures to extend its service life.

3. Setup

III. Usage Preparation

3.1 Auxiliary Tool Preparation

Prepare the following auxiliary tools as needed for smooth operation:

  • Cleaning Cloth x 1 (for wiping oil and dust on the tool surface)
  • Lubricating Oil x 1 (for maintaining movable parts, optional)
  • Torque Tester x 1 (for precision work such as industrial assembly)
  • Protective Goggles x 1 (to prevent injury from splashing debris)

3.2 Environmental & Workpiece Requirements

  1. Operate in a clean, ventilated area with a flat floor. Keep away from flammable, explosive, corrosive substances, children and unrelated personnel.
  2. Ensure the workpiece surface is free of oil, rust and deformation. Confirm the bolt/nut specification matches the tool to avoid tool jamming or damage.
  3. Take protective measures when operating outdoors or in damp environments to prevent the tool from rusting. Keep electrical auxiliary tools away from water (if applicable).

Step 1: Tool Inspection & Debugging

  1. Take out the tool main body and supporting accessories, wipe off surface oil and dust with a cleaning cloth, and check if the parts are complete and connections are firm.
  2. Test the tool's movable parts (e.g., wrench opening adjustment, adapter rotation) to ensure smooth operation without jamming or loosening. Apply a small amount of lubricating oil if necessary.

Step 2: Accessory Installation & Adaptation

  1. Select a matching adapter/socket according to the workpiece specification, align it with the tool interface, and fix it by rotating clockwise to ensure it is installed in place and not loose.
  2. Align the assembled tool with the workpiece (bolt/nut), adjust the tool position to ensure close fit with the workpiece to avoid slipping during operation.
Airbrush with various accessories laid out
Figure 2: Airbrush components and accessories, ready for assembly and adaptation.

4. Operating Instructions

Step 3: Standard Operation

  1. Hold the tool handle with both hands (two hands are required for heavy tools), keep your body stable, and apply force slowly in the direction of stress to avoid tool rebound caused by sudden force.
  2. Ensure the tool exerts vertical force on the workpiece when tightening or removing it. Strictly prohibit lateral force to prevent workpiece slipping and tool deformation.
  3. Do not force operation if the workpiece is rusted or jammed. You can spray rust remover and let it stand for a while before trying again, or replace it with a suitable tool.
Close-up of the airbrush gravity feed cup and nozzle
Figure 3: Detail of the gravity feed cup and nozzle, illustrating the paint reservoir and spray mechanism.

5. Maintenance

Step 4: Post-operation Arrangement

  1. After operation, remove the supporting accessories by rotating counterclockwise, and clean the oil and debris on the surface of the tool and accessories.
  2. Perform simple maintenance on the tool's movable parts by applying a small amount of lubricating oil, then place the tool and accessories into the storage bag/box for proper storage.

Note: The operation method varies for different types of tools. For example, electric tools require additional confirmation of power compatibility and must be operated in strict accordance with the corresponding operating specifications.

Airbrush set including the airbrush, wrench, dropper, and storage box
Figure 4: The airbrush set with its storage box, emphasizing proper storage after use.

6. Troubleshooting

This section provides general guidance for common issues. For complex problems, consult a professional or contact customer support.

  • Paint Clogging: Ensure paint is properly thinned to the manufacturer's recommendations. Thoroughly clean the nozzle, needle, and paint cup after each use to prevent residue buildup.
  • Inconsistent Spray Pattern: Check your air compressor's pressure settings to ensure it's within the recommended range for airbrushing. Verify the paint consistency is uniform. Ensure all airbrush connections are secure and there are no leaks.
  • Leaking: Inspect all parts for correct assembly and ensure they are tightened appropriately. Check O-rings and seals for any signs of wear or damage and replace if necessary.

7. Specifications

Feature Detail
Product Name Spray Gun
Model SD130
Type Multi-Purpose Dual-Action Gravity Feed Airbrush
Material High-quality alloy and engineering plastic
Battery Included No
High-concerned chemical None
Origin Mainland China
Package Length 20 cm
Package Width 11 cm
Package Height 5 cm
Package Weight 0.231 kg

8. User Tips

Based on general user experiences with similar airbrush tools, here are some helpful tips:

  • Test Before Project: Always perform a test spray on a scrap surface or paper before applying to your main project to ensure proper paint consistency and spray pattern.
  • Consistent Air Pressure: For optimal performance and smooth results, ensure your air compressor provides consistent air pressure suitable for airbrushing. Fluctuations can lead to uneven application.
  • Thorough Cleaning: Regular and thorough cleaning is crucial for maintaining the longevity and performance of your airbrush. Disassemble and clean all paint-contacting parts immediately after each use.
  • Proper Thinning: Experiment with paint thinning ratios to achieve the best flow for your specific paint type and desired effect. Too thick paint will clog, too thin will run.

9. Warranty & Support

V. Disclaimer

  1. The manufacturer is not liable for product failure caused by force majeure (e.g., earthquake, fire, natural disasters), improper manual operation, over-spec/overload use, third-party damage, or accidental damage during cross-border transportation.
  2. The warranty becomes invalid if the product is damaged due to unauthorized disassembly or modification of core components, use of non-original accessories, or illegal repair. The manufacturer shall not bear any liability.
  3. The content of this manual is only for guidance on tool installation, operation and maintenance. Product parameters and functions may be slightly adjusted due to version updates. The actual product shall prevail.

For a comprehensive guide and additional details, please refer to the official user manual PDF available at: Airbrush Model SD130 User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.