1. Introduction
Thank you for choosing this dedicated mounting base for Hailong and Polly series batteries. This product is specifically designed for standard down-tube batteries like Hailong and Polly, serving as the core mounting component for your electric bicycle's battery system.
The base features a composite structure of high-strength ABS engineering plastic and an aluminum alloy guide rail, offering both stable support and precise positioning. The slide-rail design enables quick battery installation and removal with reliable electrical connection, making it a key accessory for ensuring riding safety and battery longevity.
Core Features:
- Precise Fit: Specifically designed for the bottom slot structure of Hailong series batteries.
- Quick Release: Slide-rail structure allows battery installation or removal in seconds.
- Secure Locking: Double retention with bottom metal latch and anti-detachment groove.
- Electrical Integration: Pre-installed power output cable (Anderson / XT60).
2. Package Contents
Upon opening the package, please check for the following components:
Figure 1: Package Contents - Battery Base and Accessories
| No. | Component Name | Qty | Remarks |
|---|---|---|---|
| 1 | Battery Base Main Body | 1 pc | Includes guide rail, latch mechanism |
| 2 | Battery Conversion Cable | 1 pc | Anderson to XT60 Male battery conversion cable |
| 3 | Mounting Screw Kit | 1 set | M5 screws (varies by vehicle model) |
| 4 | Anti-slip Silicone Pad | 2 pcs | Between base and frame for vibration dampening |
| 5 | 4mm Hex Key | 1 pc | Tool for installing the battery base |
3. Product Overview & Features
Figure 2: Product Overview with Key Dimensions and 4-Prong Detail
Figure 3: Product Weight and Internal Structure (297g)
Figure 4: Secure Connection Details and Included Accessories
4. Technical Specifications
Figure 5: Precise Fit for Hailong Battery - Dimensions
Figure 6: Front & Back Details - High-Quality Aluminum + ABS for Durability
| Parameter | Specification |
|---|---|
| Product Name | Hailong/Parrot Series Battery Mounting Base |
| Compatible Battery Series | Hailong 1/2, Hailong G80, Polly, and other down-tube battery series |
| Dimensions | Approx. 345 × 66 × 30 mm (fits standard Hailong/Polly batteries) |
| Main Body Material | ABS Engineering Plastic (Flame Retardant Grade) |
| Guide Rail Material | Aluminum Alloy (Anodized) |
| Rated Current | Max 30A (Continuous) / 60A (Peak) |
| Power Cable Spec | 12AWG Silicone Wire, approx. 20cm |
| Output Connector | 30A XT60 |
| Protection Rating | IP54 (Dust and splash water resistant) |
| Operating Temperature | -20°C ~ +60°C |
| Mounting Holes | 2/3/4 mounting holes (M5), spacing compatible with standard bottle cage mounts |
| Safety Certifications | CE, RoHS |
5. Component Diagram
Figure 7: Component Diagram - Front and Back Details
Main Base Structure:
- Guide Rail Slot: Battery bottom slot slides in; made of wear-resistant aluminum alloy.
- Power Output Terminal: Gold-plated copper contacts that mate with battery terminals.
- Latch Mechanism: Bottom metal spring latch; locks automatically when battery is slid in.
- Release Lever: Press to release the battery.
- Power Output Cable: Connects to the controller.
- Mounting Holes: 2/3/4 M5 screw holes, spacing compatible with standard bottle cage mounts.
- Anti-slip Silicone Pad: Between base and frame for vibration dampening.
6. Installation
6.1 Pre-Installation Preparation
Safety Warning: Disconnect the battery power before installation!
Tools Required: 4mm Hex Key, Cable Ties
6.2 Base Installation Steps
Figure 8: Battery Base Installed on an E-bike Frame
- Positioning: Place the base on the down tube where the battery will be installed, aligning it with the bottle cage mounting holes.
- Pre-install Screws: Insert M5 screws through the base mounting holes and hand-tighten into the frame holes to verify alignment.
- Secure Base: Tighten screws using the 4mm hex key. Torque: 25-30 N·m. Note: Do not overtighten to avoid deforming the base or stripping the frame threads.
- Route Cable: Route the power output cable along the down tube towards the controller. Secure with cable ties, ensuring it avoids moving parts (chain, crank).
6.3 Electrical Connection
Wiring Definition:
| Wire Color | Definition | Connection |
|---|---|---|
| Red (Thick) | Power Positive (+) | Controller Power Input Positive |
| Black (Thick) | Power Negative (-) | Controller Power Input Negative |
Connection Steps:
- Identify the power connector type (Anderson / XT60) on your controller.
- Connect the base output cable to the controller input cable, ensuring the connector locks securely.
6.4 Battery Installation and Testing
- Battery Check: Before installation, ensure the battery's bottom contacts are clean and free of oxidation.
- Slide Installation: Align the battery's bottom slot with the base guide rail and slide it in from the front. A "click" indicates it is locked.
- Secure Confirmation: Gently pull the battery to confirm it is locked and does not move.
- Power-On Test:
- Turn on the battery switch; check if the display lights up normally.
- Gently twist the throttle to confirm normal motor operation.
- Turn off the battery switch to confirm the system powers down.
7. Battery Removal and Reinstallation
7.1 Removing the Battery
- Turn off the battery power switch.
- Press the release lever at the back of the base (or use a key to turn the lock cylinder, depending on the model).
- Hold the battery handle and slide it backward to remove it.
7.2 Installing the Battery
- Ensure the release lever is in the released position.
- Align the battery's bottom slot with the front end of the base guide rail.
- Push the battery forward until the latch clicks shut.
- Gently pull the battery to confirm it is securely fastened.
8. Maintenance & Care
- Regular Checks: Monthly, check that the base mounting screws are tight and the latch operates smoothly.
- Cleaning: Clean the guide rail and contacts with a dry cloth. Avoid direct rinsing with water or solvents.
- Waterproofing: Avoid directing high-pressure water jets at the seam between the base and battery when washing the bike.
- Lubrication: Apply a small amount of lubricating grease to the latch mechanism every six months to ensure smooth operation.
- Long-term Storage: If the vehicle will not be used for an extended period, remove the battery for storage and apply a small amount of anti-rust oil to the base contacts.
9. Troubleshooting
9.1 Common Issues and Solutions
| Symptom | Possible Cause | Troubleshooting Steps |
|---|---|---|
| Battery cannot slide in |
|
|
| Battery not locked / loose |
|
|
| No power after installation |
|
|
| Power cuts out while riding |
|
|
| Charging abnormal |
|
|
9.2 Contact Oxidation Treatment
If oxidation occurs on the battery contacts or base terminals, gently rub with an eraser or fine sandpaper (1000 grit or higher).
10. User Tips
- Always double-check the pin configuration (e.g., 4-pin, 5-pin, 6-pin) and overall dimensions of your battery to ensure compatibility with the chosen base model.
- The included XT60 to Anderson adapter provides flexibility for various controller connections. Ensure you use the correct adapter for your setup.
- The product is generally well-made and sturdy, but proper installation and regular checks are crucial for long-term performance.
11. Safety Warnings
Important Safety Precautions:
- Power Off: Always turn off the battery power switch before installation, removal, or cleaning.
- Prevent Short Circuits: Avoid direct contact between positive and negative wires when connecting; wrap bare wire ends with insulating tape.
- Secure Mounting: Never ride with the battery unlatched, as it could fall off and cause an accident.
- No Modifications: Do not modify the base structure or replace the power cable with non-original parts.
- Waterproofing: This product has an IP54 rating, offering protection against splashes. Do not submerge in water.
- Compliant Use: Adhere to local regulations regarding electric bicycle battery installation.
12. Disclaimer
This product is a specialized accessory for electric bicycles. The user is responsible for ensuring installation is performed by a qualified technician or a professional bike shop. The manufacturer assumes no liability for damage or safety incidents resulting from user modification, improper wiring, overload, or installation not following these instructions.
13. Support Information
Email: service@powallon-e.com
Official Website: www.powallon-e.com
For additional information, you may refer to the official product guide: User manual (PDF)
Friendly Reminders:
- Please read this manual carefully before installation to ensure full understanding.
- After initial installation, perform a 10-15 km test ride in a safe area to confirm battery stability.
- Keep this manual with your vehicle documents for future reference.