IKSLED Touch Sensor T10-16

Contents

IKSLED Touch Sensor Switch T10-16 User Manual

For 5V, 12V, 24V LED Desk Lamps and Strip Brightness Control

1. Product Overview

The IKSLED Touch Sensor Switch T10-16 is a compact and versatile touch-sensitive controller designed for LED lighting applications. It provides on/off functionality and stepless dimming control for various LED lights operating at 3.7V, 5V, 12V, or 24V DC. Available in 10mm, 13mm, and 16mm hole sizes, it integrates seamlessly into different fixtures.

Assortment of IKSLED Touch Sensor Switches

Figure 1: Various IKSLED Touch Sensor Switches

2. Setup and Installation

2.1 Safety Warning

WARNING: Please strictly follow the instructions, safety tips, and use the product with caution. Ensure power is disconnected before installation.

2.2 Hole Preparation

The touch sensor switches are designed for specific hole diameters:

  • 10T: Requires a 10mm diameter hole.
  • 13T: Requires a 13mm diameter hole.
  • 16T: Requires a 16mm diameter hole.

Ensure the hole is clean and free of debris for proper seating of the sensor.

Mini Touch Sensor sizes and installation example

Figure 2: Available sensor sizes (10mm, 13mm, 16mm) and an example of flush mounting.

Dimensions for Black 16T Touch Sensor

Figure 3: Detailed dimensions for the 16T sensor (2cm diameter, 0.9cm height, 1.6cm base diameter, 11cm wire length).

2.3 Wiring Instructions

Connect the wires as described in the diagram below. Incorrect wiring can prevent the switch from functioning or damage the LED light.

Wiring diagram for IKSLED Touch Sensor Switch

Figure 4: Wiring Diagram. Connect LED+ to the positive output of the switch, LED- to the negative output. Connect Power+ to the positive terminal of your DC power supply and Power- to the negative terminal.

  • Input (from Power Adapter): Connect the positive (+) wire from your DC power adapter to the switch's Power+ input. Connect the negative (-) wire from your DC power adapter to the switch's Power- input.
  • Output (to LED): Connect the positive (+) wire of your LED light to the switch's LED+ output. Connect the negative (-) wire of your LED light to the switch's LED- output.

2.4 Installation Demonstration

Watch this video for a visual guide on installing and testing the touch sensor switch.

Video 1: Demonstration of touch sensor installation and dimming function.

3. Operating Instructions

Once properly installed and powered, the touch sensor switch offers simple control:

  • Turn On/Off: Briefly touch the sensor surface to toggle the LED light on or off.
  • Adjust Brightness (Dimming): When the light is on, press and hold your finger on the sensor surface. The brightness will gradually increase or decrease. Release your finger when the desired brightness level is reached.
Touch sensors integrated into a lamp base

Figure 5: Example of touch sensors integrated into a lamp base for easy access.

4. Maintenance

The IKSLED Touch Sensor Switch is designed for durability and requires minimal maintenance:

  • Cleaning: Use a soft, dry cloth to clean the sensor surface. Avoid abrasive cleaners or solvents that could damage the finish or functionality.
  • Environment: Ensure the switch is not exposed to excessive moisture or extreme temperatures, which could affect its performance and lifespan.
  • Inspection: Periodically check the wiring connections to ensure they are secure, especially if the device is in an area subject to vibration.

5. Troubleshooting

If, after connecting the wires, the LED light remains constantly on or off, and the switch does not respond to touch, consider the following:

5.1 Common Issues and Resolutions

  1. Mismatch of Working Voltage:

    Problem: The voltage of your power adapter or LED light does not match the supported voltage range of the switch.

    Resolution: First, confirm that your power adapter provides a constant voltage (DC 3.7V, 5V, 12V, or 24V) and that your LED light is rated for the same voltage (DC 3V, 3.7V, 5V, 12V, or 24V).

  2. Input/Output and Positive/Negative Poles Reversed:

    Problem: The positive and negative wires for either the input power or the LED output are connected in reverse.

    Resolution: Carefully check the wiring diagram (Figure 4) and ensure all input and output positive/negative poles are connected correctly. If reversed, correct the connections.

  3. Switch Not Fixed or Moving During Use:

    Problem: The touch sensor switch is not securely fixed in its mounting hole and moves, causing it to constantly detect changes in its environment, leading to erratic behavior.

    Resolution: Turn off the power. Securely fix the induction switch in its mounting hole to prevent movement during operation. Then, restore power and test.

6. Specifications

Product Specifications
Feature Detail
Product Name Touch Sensor Switch (10T / 13T / 16T)
Model Number T10-16
Brand IKSLED
Voltage Input 3.7V, 5V, 12V, 24V DC
Max. Load Current 2.5A
Hole Size Options 10mm (for 10T), 13mm (for 13T), 16mm (for 16T)
Function Touch control for on/off, hold-to-adjust dimming (stepless)
Certification CE, RoHS
Warranty 1 Year
Package Weight 0.03 kg
Package Dimensions 18cm x 14cm x 3cm (L x W x H)
Product Specifications table

Figure 6: Summary of product specifications.

7. User Tips

  • Pre-Installation Testing: Before final installation or embedding the switch, it is highly recommended to test the unit with your power supply and LED light to ensure it is functioning correctly.
  • Choosing the Right Size: Select the appropriate sensor size (10mm, 13mm, or 16mm) that best fits your application's aesthetic and mounting requirements.
  • Secure Mounting: Ensure the sensor is firmly seated in its hole to prevent accidental movement, which can interfere with its touch detection.

8. Warranty and Support

The IKSLED Touch Sensor Switch T10-16 comes with a 1-year warranty from the date of purchase, covering manufacturing defects.

For technical support or warranty claims, please refer to your purchase documentation for seller contact information. Ensure you have your proof of purchase available.

© 2024 IKSLED. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.