Introduction
The VaneAims FXB-VA5+1 series is a multi-functional intelligent protector designed for Din Rail mounting. It provides comprehensive protection against over-voltage, under-voltage, and over-current conditions, while also offering real-time display of voltage, current, frequency, power, and energy consumption (kWh). This device ensures the safety and stability of your electrical systems.

Product Advantages
- Improved button design for easier pressing.
- Passcode Lock Settings (Factory default: 112) for enhanced security.
- Higher-resolution screen for clear display.
- Measures and displays values in real-time on the screen.
- 35mm Din Rail Mounting with securing clips for easy installation.

Setup and Installation
Wiring Diagram
Ensure all power is disconnected before attempting installation. Connect the device according to the following diagram:

- IN Terminals: Connect the incoming Neutral (N) and Live (L) wires to the 'IN' terminals.
- OUT Terminals: Connect the load's Neutral (N) and Live (L) wires to the 'OUT' terminals.
- Ensure all connections are secure and properly insulated.
DIN Rail Mounting
The device is designed for easy installation on a standard 35mm DIN rail, commonly found in household distribution boxes. It is equivalent in size to a regular 2P circuit breaker.

Operating Instructions
Display Functions
The device features a digital display that shows the following parameters:
- Voltage Display: Shows the current voltage (V).
- Current Display: Shows the current amperage (A).
- Frequency Display: Shows the electrical frequency (Hz).
- kWh Display: Shows accumulated energy consumption (kilowatt-hours).
- Power Display: Shows the current power consumption (W).
Button Functions
The device has three main buttons for navigation and settings:
- SET: Press and hold for more than 5 seconds to enter the setting state. Short press to cycle through parameters.
- Up/Digit+: Increases the value of the selected parameter or moves to the next digit.
- Down/Digit-: Decreases the value of the selected parameter or moves to the previous digit.
- ON/OFF: Toggles the output power.
Setup Menu Parameters
To access the setup menu, press and hold the 'SET' button for more than 5 seconds. Use the Up/Down buttons to adjust values and 'SET' to confirm or move to the next parameter. Pressing 'SET' again after adjusting the last parameter will save changes and exit the menu.

| Parameter | Description | Range/Default |
|---|---|---|
| P-1 | Power-on delay time | 1s-999s |
| P-2 | Recovery delay | 1s-999s |
| P-3 | Overvoltage Setting | 230V-300V |
| P-4 | Undervoltage Setting | 80V-210V |
| P-5 | Voltage trip delay | 0.1s-10s |
| P-6 | Voltage Correction | -9.5%~+9.5%V |
| P-7 | Overcurrent Setting | 1A-63A (or 80A/100A depending on model) |
| P-8 | Overcurrent trip delay | 0.1s-10s |
| P-9 | Overcurrent counter | 0-20 times |
| P-10 | Current adjustment | -9.5%~+9.5%A |
| P-11 | Preset Power Level | 0-999 |
| P-12 | Quick power down protection | on/off |
| P-13 | Password setting | 000-999 (Factory default: 112) |
Video Demonstration
Watch this video for a visual guide on setting parameters and testing the device's protection features.
Maintenance
The VaneAims FXB-VA5+1 is designed for reliable, long-term operation with minimal maintenance. To ensure optimal performance:
- Cleaning: Periodically wipe the device with a dry, soft cloth to remove dust and debris. Do not use liquid cleaners or solvents.
- Inspection: Regularly inspect the wiring connections to ensure they remain tight and free from corrosion.
- Environmental Conditions: Ensure the device operates within the specified ambient temperature and humidity ranges to prevent damage.
Troubleshooting
The device is equipped with several protection mechanisms. If the device trips or behaves unexpectedly, consider the following:
- Over-voltage Protection: If the input voltage exceeds the set overvoltage threshold (P-3), the device will trip to protect connected equipment. Check the power supply voltage.
- Under-voltage Protection: If the input voltage drops below the set undervoltage threshold (P-4), the device will trip. Check the power supply voltage.
- Over-current Protection: If the current drawn by the load exceeds the set overcurrent threshold (P-7), the device will trip. Reduce the load or check for short circuits.
- Automatic Recovery: The device is designed for automatic recovery after a fault condition clears, following the set recovery delay (P-2).
- No Display/Power: Verify that the input power is connected correctly and is within the rated voltage range.
- Inaccurate Readings: If readings appear incorrect, consider using the Voltage Correction (P-6) or Current Adjustment (P-10) features, or consult a qualified electrician.
Specifications
| Feature | Specification |
|---|---|
| Model Number | FXB-VA5+1 / FXB-VA5+1-G |
| Type | Mini Voltage Relay |
| Supply Terminals | N, L |
| Rated Supply Voltage | AC 220V |
| Rated Frequency | 50/60Hz |
| Overvoltage Setting Range (>V) | AC240-300V |
| Undervoltage Setting Range (<V) | AC140-230V |
| Voltage Hysteresis | 5V |
| Overvoltage Trip Delay | 0.5s |
| Voltage Accuracy | <1% |
| Max Operating Phase Voltage | 350V |
| Max. Operating Current | 63A (Available in 40A/80A/100A variants) |
| Altitude | ≤2000m |
| Delay Time | 5-300s |
| Permissible Relative Humidity | ≤50% at 40°C (without condensation) |
| Ambient Temperature | -25°C ~ +55°C |
| Size | 81*36*66mm |
| Certification | CE, RoHS |
| Is Smart Device | No |
| Origin | Mainland China |

User Tips
- Current Detection: Be aware that the device may have limitations in detecting very small currents. For applications requiring precise measurement of low currents, consider supplementary instrumentation.
- Periodic Checks: For long-term reliability, it is recommended to periodically check the device's settings and functionality, especially after any power fluctuations or system changes.
- Password Security: Remember your password (factory default: 112) to access advanced settings. If you change it, keep a secure record.
Warranty and Support
For detailed warranty information and technical support, please refer to the official user manual PDF or contact VaneAims customer service.
Official User Manual (PDF): Download User Manual (PDF)
For further assistance, please reach out to your vendor or the manufacturer directly.