AVATTO GW80-MQTT

Contents

AVATTO GW80-MQTT ZigBee 3.0 Dongle Gateway User Manual

Your comprehensive guide to smart home connectivity

1. Introduction

The AVATTO GW80-MQTT is a versatile ZigBee gateway designed to facilitate the integration of ZigBee sub-devices with popular open-source smart home platforms such as Home Assistant and Zigbee2MQTT. Built on ESP32D0+CC2652P chips, this gateway offers multiple connection methods (Ethernet, USB, and WiFi) to adapt to various usage scenarios. Users can easily access the device's web console via mDNS domain names to perform firmware updates, switch working modes, and configure other operations. It also integrates advanced features like Webhooks, MQTT, and VPN for enhanced smart home management.

AVATTO ZigBee 3.0 Dongle with dual antennas, showing compatibility with Home Assistant, OpenHAB, and Zigbee2MQTT.

Image 1: AVATTO ZigBee 3.0 Dongle highlighting compatibility with Home Assistant, OpenHAB, and Zigbee2MQTT.

2. Product Overview

The GW80-MQTT dongle gateway is an ideal solution for building robust smart home systems. It is compatible with all Zigbee and Thread devices, allowing seamless integration and control within your home assistant setup.

Key Features:

  • High-Performance Chips: Equipped with ESP32 V3 for WiFi and CC2652P/CC2652P7 for Zigbee, ensuring reliable and efficient operation.
  • Dual Antenna Design: Features dual antennas for enhanced signal strength and wider coverage.
  • Three Configuration Modes: Supports network cable (Ethernet), WiFi, and USB connections for flexible deployment.
  • Web Control Interface: Manage and configure the device easily through a web-based interface.
  • Automatic Firmware Update: Supports over-the-air (OTA) firmware updates via the web interface.
  • Broad Compatibility: Works with Home Assistant, Zigbee2MQTT, OpenHAB, and supports Zigbee 3.0.
  • Thread Functionality: Includes Thread function support.
  • Secure VPN Tunnels: Supports secure VPN tunnels to Home Assistant with protected authorization.
  • Multi-language Support: Features 15 localized interface languages.
  • LED Control and Night Mode: Customizable LED behavior for user preference.
Diagram illustrating key features of the AVATTO ZigBee 3.0 Dongle: high-performance chips (ESP32, CC2652P/P7), dual antennas for enhanced signal, automatic firmware updates, and a web control interface.

Image 2: Diagram illustrating the high-performance chips, dual antenna design, automatic firmware update, and web control interface.

Diagram showing the AVATTO ZigBee 3.0 Dongle as a central gateway connecting various smart home devices like sensors, cameras, sockets, and switches.

Image 3: The AVATTO ZigBee 3.0 Dongle acting as a central gateway for various smart home devices.

3. Specifications

Parameter Value
Model Number GW80-MQTT
Input 5V-1A for Type-C
Wireless Connection Zigbee 3.0, Wi-Fi IEEE 802.11b/g/n 2.4GHz
Working Temperature -10°C ~ 60°C
Shell Material Aluminum alloy
Antenna Gain 3dBi
WiFi SoC ESP32 V3
Zigbee SoC CC2652P/CC2652P7
Ethernet 100Mbps IEEE 802.3u
Dimensions (L x W x H) 96mm x 19mm x 115mm (with antennas)
Detailed product parameters and dimensions of the AVATTO GW80-MQTT ZigBee 3.0 Dongle, including input, wireless connection, working temperature, and SoC details.

Image 4: Product parameter table and physical dimensions of the GW80-MQTT dongle.

4. Setup Guide

4.1 Initial Connection

  1. Connect the AVATTO GW80-MQTT dongle to a power source using a 5V-1A Type-C adapter. The device is equipped with OVP/OCP overvoltage protection.
  2. Choose your preferred connection mode: Ethernet, USB, or WiFi.

4.2 Operating Modes and Connection

Illustrations of the three connection modes for the AVATTO ZigBee 3.0 Dongle: WiFi connection, Ethernet port connection, and USB connection.

Image 5: Visual representation of the three connection modes: WiFi, Ethernet, and USB.

4.2.1 Ethernet + Type-C Power Supply Mode

  • Connect a network cable to the Ethernet port of the dongle.
  • Power the device via the Type-C port.
  • This mode provides a stable and reliable network signal.

4.2.2 Ethernet + POE Power Supply Mode (Optional)

  • The ETH-52P itself does not support POE function directly.
  • If POE power supply is desired, you must purchase separate POE splitter accessories and use them to power the device.

4.2.3 USB Connection Mode

  • Connect the dongle directly to your host device (e.g., Raspberry Pi running Home Assistant) using the included Type-C to USB cable.
  • The dongle will function as a USB Zigbee gateway.

4.2.4 WiFi Connection Mode

  • After powering on, the device's WiFi AP (Access Point) is enabled by default.
  • Search for and connect to the hotspot named 'dongle xxxx' from your computer or mobile device.
  • Once connected, open a web browser and navigate to dongle.local to enter the web interface for configuration.
  • Note: If there is an active WiFi or network connection, the AP will not turn on. The AP will only remain active if there is no internet connection. If WiFi or network is turned on, the device will attempt to reconnect for 60 seconds. If it still cannot connect, the AP will restart.

4.3 Device Configuration (Web Console)

  1. After connecting the device to your network (Ethernet, USB, or WiFi), open a web browser within the same LAN.
  2. Enter Dongle.local in the address bar to access the WEB console.
  3. Follow the on-screen instructions to configure the dongle for ZHA (Zigbee Home Automation) or Zigbee2MQTT.
AVATTO ZigBee 3.0 Dongle Plus, compatible with Zigbee and Thread devices, showing web interface and mobile app for configuration.

Image 6: The AVATTO ZigBee 3.0 Dongle displaying its web interface for configuration.

5. Button Functions

  • Click: Turns the LED on/off.
  • Long press (more than 3 seconds): Switches between USB Mode and Network Mode.
  • Long press (more than 10 seconds): Restores Factory Settings.

6. LED Status Indicators

Status LED Indication
Power On (default) Cyan LED remains lit
USB Mode Blue LED remains lit
Zigbee OTA (Over-The-Air) Update Blue flashing
Connecting to Home Assistant (Network Mode) Green LED remains lit
No Connection to Home Assistant Green flashing
Error Red flashing
Network/WiFi Mode: Not Configured Green light flashes
Network/WiFi Mode: Configuration Successful Green light always on
USB Mode: Not Configured Green light flashes
USB Mode: Configuration Successful Blue light always on

7. Firmware Updates

The AVATTO GW80-MQTT supports web-based Over-The-Air (OTA) updates. You can upgrade both the Zigbee and core firmware with a single click through the device's web console. Regularly checking for and applying firmware updates is recommended to ensure optimal performance, security, and compatibility with the latest smart home platforms and devices.

8. Troubleshooting

  • Device not accessible via Dongle.local: Ensure your computer or mobile device is connected to the same local area network (LAN) as the dongle. If using WiFi mode, ensure you are connected to the dongle's AP or the same WiFi network it is configured for.
  • WiFi AP not turning on: If the dongle has an active Ethernet or WiFi connection, its own AP will not be active. The AP only activates if there is no internet connection. If the device fails to connect to a configured WiFi network after 60 seconds, it will revert to AP mode.
  • LED indicating error (Red flashing): This typically indicates a critical error. Try restarting the device. If the issue persists, perform a factory reset (long press button for >10 seconds).
  • Zigbee devices not connecting: Ensure the dongle is properly configured for your chosen platform (ZHA or Zigbee2MQTT) via the web console. Check the Zigbee network status in your smart home platform.
  • Poor signal strength: Ensure the dual antennas are properly attached and oriented. Consider the placement of the dongle to minimize interference and maximize coverage.

9. User Tips

  • Optimal Placement: Position the dongle centrally within your smart home environment to maximize Zigbee signal coverage. Avoid placing it near large metal objects or other wireless interference sources.
  • Stable Power: Always use a stable 5V-1A Type-C power supply to ensure consistent operation.
  • Regular Updates: Keep the dongle's firmware updated to benefit from the latest features, bug fixes, and compatibility improvements.
  • Backup Configuration: Before major changes or firmware updates, consider backing up your Zigbee network configuration within your smart home platform.

10. Safety Information

  • Do not expose the device to extreme temperatures, humidity, or direct sunlight.
  • Do not attempt to disassemble or repair the device yourself. This may void the warranty and cause damage.
  • Keep the device away from water and other liquids.
  • Use only the specified power adapter (5V-1A Type-C) to prevent damage.
  • Ensure proper ventilation around the device during operation.

11. Warranty and Support

For detailed warranty information, technical support, and additional documentation, please refer to the official product page or contact AVATTO customer service.

A comprehensive user manual in PDF format is also available for download:

Download User Manual (PDF)

© 2024 AVATTO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.