STUOGYUM HDV-604S

Contents

STUOGYUM HDV-604S Digital Video Camera User Manual

This manual provides detailed instructions for the safe and effective use of your STUOGYUM HDV-604S Digital Video Camera. Please read it carefully before operation and retain for future reference.

WARNING: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements.

1. Introduction

Thank you for purchasing our digital camera. Please read this user manual prior to using the camera and keep it in good condition for future use. The instructions and illustrations in this manual are based on the latest information available at the time of publication and are intended to show camera operation directly and comprehensively. Please note that due to different production batches and development, the actual product may have slight visual differences from the illustrations.

2. Setup

2.1 Initial Setup Procedure

Please follow these steps to set up your camera:

  1. Check Power Supply: Ensure the battery is charged and correctly inserted.
  2. Input and Format Memory Card: Insert and format the SD/MMC card.
  3. Video/Photo Mode: Select your desired mode.
  4. Connect Computer: Connect the camera to a computer for data transfer if needed.

2.2 Battery Installation

The camera uses an original rechargeable lithium battery (NP-FV5). To install or replace the battery:

  1. Ensure the camera is switched off.
  2. Open the battery compartment.
  3. Insert the charged battery into the battery box, pushing it up until it is electrically locked and securely placed.
  4. To remove, press the electric lock, and the battery will pop up for manual removal.
STUOGYUM HDV-604S Digital Video Camera with battery and SD card
Figure 1: STUOGYUM HDV-604S Digital Video Camera, showing the battery and SD card slot area. The camera features a CMOS sensor, supports 32GB, 1080P HD, and offers 2x increased sensitivity for stability.

2.3 Memory Card Insertion and Formatting

The camera supports SD memory cards and MMC cards (4GB to 256GB). It is recommended to use a new memory card or one that has been formatted by this camera.

  1. Open the SD slot cap.
  2. Insert the SD/MMC card with its metal sheet facing outwards, following the guidance next to the slot.
  3. Press the SD/MMC card gently to ensure it is fully inserted.
  4. To remove, press the card again, and it will eject slightly.

Attention:

  • Power off the camera before inserting or replacing the memory card.
  • Insert the card in the correct direction. Do not force the card, as this may damage the card or camera components. If insertion is not smooth, check the direction.
  • Memory cards should be formatted for first-time use or if they were previously used with another camera.
  • Do not accidentally click on format options during use. Once an SD card is formatted, it generally does not need to be formatted again unless necessary.
  • It is highly recommended to back up photos to your computer regularly.
  • If you need to reformat the SD card, back up your pictures first, as reformatting will erase all data.

2.4 Screen Adjustment

The camera features a rotating screen. Turn the LCD screen outwards towards the user for optimal viewing during recording or playback.

STUOGYUM HDV-604S Digital Video Camera with 3.0 inch LCD screen
Figure 2: The STUOGYUM HDV-604S camera displaying 1080P HD video on its 3.0" LCD large screen, illustrating the clarity difference between 720p and 1080p.

2.5 Powering On/Off

Press and hold the POWER button for two seconds to switch the camera on or off.

3. Operating Instructions

3.1 Function Buttons and Indicators

Diagram of STUOGYUM HDV-604S camera function buttons
Figure 3: Detailed diagram of the STUOGYUM HDV-604S camera, labeling key components such as Hot Shoe Adapter, Menu, Zoom, Photo Mode, Playback, USB socket, Power, TFT screen, and Battery compartment.
Table 1: Key Functions and Indicators
Button/Indicator Function
PowerFor powering on/off the camera.
Start/StopFor recording/stopping recording.
PhotoFor photographing.
ZoomFor focusing and zooming in/out pictures (under playback mode). Also for selecting left or right in the menu screen.
ModeFor changing modes (recording/photographing/playback).
MenuFor opening/exiting the menu.
Up buttonFor selecting the previous picture or moving a picture (during zooming in). EV+.
Down buttonFor selecting the next picture or moving a picture (during zooming in). EV-.
Left/DISP buttonMove left in menu settings; turn the display on/off.
Right buttonMove right in menu settings.
OK buttonConfirm; turn the fill light on/off.
PlaybackEnter/exit the playback mode.
IndicatorBlue indicator means working mode. Red indicator means charging status. Flashing means the battery is not properly installed. When the indicator is off, the battery is full.
Hot shoe adapterConnect camera external accessories.

3.2 Mode Switching (Video/Photo)

Press the MODE key to switch between Video, Photo, and System Setting modes. Press it again from System Setting mode to return to Video mode.

3.3 Recording Video and Taking Photos

  • Video Recording: After the camera is turned on, press the START/STOP button to begin recording. Press it again to stop.
  • Taking Photos: While in Video mode, press the MODE button to enter Photo mode. Then, press the PHOTO button to capture an image.
  • Digital Zoom: Use the T or W key to activate digital zoom.
  • Self-timer: In Photo mode, press the PHOTO key for time delay shooting (2s, 5s, or 10s).
Video Playback and 16X Digital Zoom demonstration
Figure 4: Demonstration of video playback and 16X digital zoom capabilities, showing different zoom levels (4X, 8X, 16X) applied to a landscape scene.

3.4 HD Output (Part models)

To output photos and videos to a high-definition TV, connect the camera's HD port to the TV's HD input port. Ensure video playback is stopped before connecting or disconnecting the HD cable.

Camera with external microphone and tripod support
Figure 5: The camera shown with an external microphone (not included) and mounted on a tripod, highlighting the standard hot shoe for accessories and tripod support.

3.5 System Menu Settings

In Video mode, press the MODE key twice to open the system menu. Use the W/T button or Up/Down key to select a submenu. Press OK to enter the submenu. Use W/T or Up/Down to adjust settings. Press OK to save, or MENU to cancel. The selected menu item will be highlighted.

For Video and Photo menu settings, the process is similar. Press the MENU button in Video or Photo mode to access their respective settings.

Attention:

  • Hold the camera stably during photo shooting. For best quality, use a tripod or other support.
  • Do not move the camera until the BUSY light turns off after pressing the shutter, to ensure sharp photos.

3.6 Playback

  1. In Video mode, press the PLAYBACK button to enter the playback interface. Use the MENU key to access playback settings, where you can delete, protect, rotate, or play video/photo files as a slide show. Use Up/Down or W/T to select menu items, and OK to confirm.
  2. To play a video, select it and press the START/STOP button. Press again to stop. A playing timer will be displayed.
  3. To zoom in/out on a photo, press the W/T key while viewing it.

3.7 Connecting to a Computer

To download photos/videos or use the camera as a webcam:

  1. Plug one end of the USB cable into your computer's USB port.
  2. Ensure the camera is turned off. Plug the other end of the USB cable into the camera's USB port.
  3. Webcam Mode: While pressing the MODE button, press the POWER button to turn on the camera. The camera will enter webcam mode. Open AMCAP software (user-downloaded) on your computer to view the camera's feed.
  4. U-Disk Mode: Press the POWER button to turn on the camera. It will enter U-disk mode, allowing you to read or copy data from the SD card in the camera. Photos and videos are saved under the DCIM folder.

Attention:

  • Do not disconnect the camera from the computer while downloading files.
  • To prevent data loss, do not insert or remove the memory card while the camera is connected to a computer via USB.

4. Maintenance

4.1 Camera Care

  • Keep the camera in a dry and dark place when not in use, and remove the battery.
  • Always wear the wrist strap to prevent accidental drops.
  • Use a proper protective casing to prevent scratches to the lens and display.
  • To clean the lens surface, gently blow away dust, then wipe lightly with a fabric or paper specifically designed for optical devices. Lens cleaner can be used if necessary. Do not use organic solvents.
  • Avoid touching the lens with your fingers.

4.2 Memory Card Care

  • Do not use or store the memory card in superheated or supercooled environments.
  • Keep the memory card clean and away from liquids. Use a soft cloth to clean if it comes into contact with liquid.
  • Store the memory card in its sleeve when not in use.
  • It is normal for the memory card to warm up after prolonged use.
  • Performance of memory cards can degrade after repeated use. Replace with a new card if performance declines.
  • As a precision electronic unit, do not fold, drop, or squeeze the memory card.
  • Do not place the memory card in high electric or magnetic fields, such as near speakers or TV receivers.
  • Data can be damaged by incorrect use or by switching off power/removing the card during recording, deleting, or reading. Always back up important data.

5. Troubleshooting

If you encounter issues with your camera, refer to the table below for common problems and solutions.

Table 2: Frequent Asked Questions and Solutions
Problem Solution
The camera fails to work after battery placement.
  • The power may be too low; a new battery is needed.
  • Battery package may not have been removed.
  • Battery may be placed reversely. Ensure correct placement of the battery.
Shutter is not working to make video or photo.
  • Memory card may be full. Please save the data to another memory card.
  • SD card may have write-protect enabled. Remove the SD card and unlock the write-protect switch.
Unsharp photos.
  • May be caused by shaking hands when photo shooting. Please hold the camera stably or use other supports like a tripod. Do not shake the camera when photo shooting.
Dark photos or videos.
  • Shooting environment may be too dark. Please make the shooting in a bright place, or use a light source to brighten the shooting area.
  • Battery may have too low power. Please change to a new battery.
Auto off.
  • To save energy, the camera will automatically turn off if not in use for 3m (5m or 10m, subject to the setting).
File cannot be deleted in the camera.
  • SD card has write-protect enabled. Remove the SD card and unlock the write-protect switch.
  • File protection function of the camera is activated, which can be switched off in the menu.
The video camera crashes or shows a blurred screen.
  • SD card format error. Please format the SD card within the video camera or on the computer before use.

6. Specifications

Product specifications are based on the latest information available at the time of manual creation. Specific operating methods are subject to the actual camera purchased.

6.1 General Specifications

Table 3: Camera Specifications
Feature Detail
Movie Size1920×1080 HD; 1280×720 HD; 640×480 VGA
Image Resolution (Video)1080i/P (1920*1080)
Resolution Ratio of Image24M (5600×4200); 20M (5200×3900); 16M (4608×3456); 12M (4000×3000); 10M (3648×2736); 7M-Wide (3648×2048 HD); 5M (2592×1944); 3M (2048×1536); 2M-Wide (1920×1080 HD)
Memory CardSupports SD memory card and MMC card (4GB to 256GB)
File FormatPicture: JPEG, Video: AVI
Self-timer2s/5s/10s
Digital Zoom16×
White BalanceAuto/Daylight/Cloudy/Fluorescent/Tungsten
Exposure Compensation-3.0 ~ +3.0
USB PortUSB2.0
Power ModeRechargeable Lithium Battery (NP-FV5)
Supporting LanguageFrench, German, Italian, Spanish, Russian, English, Polish, Turkish, Dutch, Brazilian Portuguese, Simplified Chinese, Traditional Chinese Style
Focal Lengthf=7.36mm (4.5-54 mm)
ApertureF/3.2
Auto Off1 minutes/3 minutes/5 minutes/No shutdown
Sensor TypeCMOS
Sensor Size1/4 inches
Display Size2" - 3"
Screen TypeRotating Screen (LCD screen)
Weight201g-300g
Image StabilizationElectronic Image Stabilization
Optical ZoomFixed Focus
External FlashYes
Application ScenariosIndoor, Scenery, HOME USE, Portrait, Other, Humanities

6.2 System Requirements

Table 4: Minimum Computer System Requirements
Component Requirement
Operating SystemMicrosoft Windows 7, 2000, XP, VISTA, Windows 8, Windows 10, Mac 10.2
CPUAbove Intel PIII667 or equivalent
Internal MemoryAbove 128MB
Audio Card, Graphic CardSupport DirectX8 or higher version
Hard-disk SpaceAbove 1GB
OtherOne standard USB 1.1 or USB 2.0 port

7. User Tips

  • Memory Card Formatting: Always format a new memory card directly in the camera before its first use to ensure compatibility and optimal performance.
  • Battery Check: Before any important recording session, ensure your battery is fully charged and correctly inserted to avoid interruptions.
  • Stable Shots: For the clearest photos and videos, especially when using zoom, stabilize the camera with a tripod or by resting it on a steady surface.
  • Backup Regularly: Connect your camera to a computer frequently to back up your photos and videos, preventing data loss in case of card issues.
  • Environmental Awareness: Avoid using or storing the camera and memory card in extreme temperatures or high magnetic fields to protect sensitive components.

8. Warranty and Support

For detailed warranty information, service, and additional support, please refer to the complete user manual available in PDF format. This document contains comprehensive details regarding product guarantees, technical assistance, and contact information.

You can view the official user manual PDF here.

NO. HDV-604LPM \ HDV-604S 20240411

© 2024 STUOGYUM. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.