OUSHI H8 H11

Contents

OUSHI H8 H11 Car LED Headlight Bulb User Manual

Model: H8 H9 H11 H16JP Universal

Introduction

Thank you for choosing OUSHI LED Headlight Bulbs. These high-power GC-7535 chip bulbs are designed to provide superior brightness and a perfect beam pattern for your vehicle's headlights, fog lights, or daytime running lights. With a 6000K-6500K white light, they offer enhanced visibility and a modern aesthetic. This manual provides essential information for safe installation, operation, maintenance, and troubleshooting.

A pair of OUSHI H8 H11 Car LED Headlight Bulbs in their packaging.
OUSHI H8 H11 Car LED Headlight Bulbs, designed for super bright illumination.

Specifications

Feature Detail
Socket Type H8, H9, H11, H16JP Universal
Working Voltage DC 11V-18V
Color Temperature 6000K-6500K White
Application Car Headlight, Fog Light, Daytime Running Lights
IP Rate IP65 (Waterproof)
Light Source Model GC-7535 Chips
Heat Dissipation Theory ADC12 Aluminum Body with Silent Turbofan
Operating Life >60,000 hours
Operating Temperature -40°C to +80°C
Certification E-Mark, CE
Dimensions (approx.) 15mm (width) x 64.8mm (total length) / 0.59in x 2.55in
Diagram showing the dimensions of the LED headlight bulb.
Approximate dimensions of the OUSHI LED headlight bulb.

Package Contents

The package includes:

  • 2 Pieces OUSHI H8 LED Headlight/Fog Bulbs

Safety Information

Please read and follow these safety guidelines carefully before installation and operation:

  • Always ensure the vehicle's ignition is off and the battery is disconnected before attempting any installation or maintenance.
  • Wear appropriate personal protective equipment, such as gloves and eye protection, to prevent injury.
  • Avoid touching the LED chips directly, as oils from your skin can affect their performance and lifespan.
  • Ensure there is adequate space around the bulb for proper heat dissipation. Obstruction can lead to overheating and reduced lifespan.
  • If you are unsure about any part of the installation process, consult a qualified automotive technician.
  • Do not modify or disassemble the bulbs, as this will void the warranty and may cause damage or injury.

Installation

The OUSHI LED bulbs are designed for a straightforward Plug and Play installation with no polarity, matching the size of original halogen bulbs for compatibility with 99% of vehicles.

General Installation Steps:

  1. Remove the Halogen Lamp: Carefully take out the existing halogen bulb from its housing.
  2. Insert the LED Lamp: Insert the new OUSHI LED bulb into the headlight or fog light housing.
  3. Secure with Frame Buckle: Snap on the frame buckle to firmly secure the LED bulb in its position.
  4. Connect the Plug: Connect the electrical plug to the LED bulb's connector.
  5. Adjust Beam Pattern: Rotate the bulb slightly to ensure the light is directed correctly and achieves the optimal beam pattern.

Important Note: Before purchasing, please verify the socket type of your vehicle's old lamp to ensure you select the correct model (e.g., H8, H9, H11, H16JP Universal).

Diagram illustrating the 5-step installation process for the LED headlight bulb.
Visual guide for installing the OUSHI LED headlight bulbs.

Operating Instructions

Once properly installed, your OUSHI LED headlight bulbs will provide immediate, bright illumination. These bulbs are engineered to deliver a perfect beam pattern, ensuring no dark spots or shadows, and preventing glare for oncoming traffic.

  • Instant Brightness: Experience full brightness in less than 0.001 seconds, significantly faster than traditional halogen bulbs.
  • Optimal Visibility: The 6000K-6500K white light closely mimics natural daylight, improving visibility and reducing eye strain during night driving.
  • Beam Pattern: The GC-7535 chips are designed to produce a precise light distribution, illuminating the road effectively without scattering light or creating blinding effects.
Diagram illustrating the perfect beam pattern of GC7535 chips, showing no dark spots or blinding oncoming traffic.
The perfect beam pattern ensures clear visibility without glare.
Image comparing low beam and high beam illumination on a road at night.
Comparison of low beam and high beam performance on a dark road.
Infographic comparing OUSHI LED bulbs to halogen bulbs in terms of brightness, lifespan, warm-up time, and temperature.
Performance comparison: OUSHI LED vs. Halogen bulbs.

Maintenance

OUSHI LED headlight bulbs are built for durability and a long operational life of over 60,000 hours, largely due to their advanced cooling system and robust construction. Minimal maintenance is required to ensure optimal performance.

  • Keep Clean: Periodically inspect the bulb surface and lens for any accumulation of dust or debris. Gently clean with a soft, dry cloth if necessary to maintain maximum light output.
  • Ensure Airflow: Confirm that the area around the bulb's heat sink is free from obstructions to allow for efficient heat dissipation.
  • Waterproof Design: The IP65 rating ensures protection against dust and water jets, making them suitable for various weather conditions including storm, snow, rain, and fog.
Diagram illustrating the efficient cooling system of the LED bulb, featuring a full aluminum body and a 13500rpm silent turbofan.
Efficient cooling system for extended bulb lifespan.
Image demonstrating the IP65 waterproof rating of the LED bulb and its performance in various weather conditions.
IP65 waterproof design ensures reliability in diverse weather.

Troubleshooting

If you encounter any issues with your OUSHI LED headlight bulbs, please refer to the following table for common problems and their solutions:

Problem Possible Cause / Solution
Flickering Light
  • Canbus Problem: Some vehicles may require a suitable Canbus decoder to prevent flickering. Install a compatible decoder.
  • Heat Dissipation: If flickering occurs after some time and resolves after a power cycle, ensure the dust cover allows sufficient space for heat dissipation. Consider replacing it with a more spacious one.
Light Off / Abnormal Light
  • Incorrect Installation: Double-check that the bulb is correctly installed and seated firmly in the socket.
  • Canbus Problem: If the lamp body still does not work after confirming correct installation, a Canbus decoder might be needed.
  • Defective Unit: If troubleshooting fails, and the lamp body is confirmed defective, cut the power line of the defective lamp body for warranty service.
Dashboard Error Message (e.g., "Warning" or "ED")
  • Canbus Incompatibility: Although these bulbs are 98% Canbus error-free, some sensitive vehicle systems may still trigger an error. An external Canbus decoder can resolve this.
Image comparing a dashboard display with OUSHI LED (no warning) versus a dashboard with a warning icon for other bulbs.
OUSHI LED bulbs are designed to be 98% Canbus error-free.

User Tips

  • Verify Socket Type: Always confirm your vehicle's original bulb socket type (e.g., H8, H11) before purchasing to ensure perfect compatibility and avoid installation issues.
  • Canbus Decoder Readiness: For vehicles known to have sensitive Canbus systems, it's advisable to have a Canbus decoder on hand, even though these bulbs are designed to be largely error-free.
  • Optimize Heat Dissipation: Ensure that the dust cover or any surrounding components do not restrict airflow around the bulb's heat sink. Adequate ventilation is crucial for maximizing the bulb's lifespan.
  • Professional Installation: If you lack experience with automotive electrical systems, consider professional installation to ensure safety and correct functionality.

Warranty and Support

Your OUSHI LED Headlight Bulbs are covered by a comprehensive 36-month warranty from the date of purchase.

Warranty Service:

In the event of a product failure, please first refer to the troubleshooting section of this manual. If the issue persists, contact our support team. For warranty claims, you may be required to provide the unique code found on the bulb and proof of purchase (e.g., store stamp, guarantee barcode, purchase date confirmation).

Conditions Beyond Warranty Scope:

The warranty does not cover issues arising from:

  • Canbus related problems that can be resolved by installing a suitable Canbus decoder.
  • Man-made damage, including but not limited to broken LED chips, damaged wires, or any modifications/repairs performed by the user.
  • Installation problems due to insufficient space in the vehicle's housing or incompatible installation positions.
  • Damage caused by natural disasters such as earthquakes, floods, etc.

Contact Support:

For any questions, technical assistance, or warranty inquiries, please do not hesitate to contact us. Your satisfaction is our priority.

We appreciate your business and encourage you to share your positive experience. Your feedback helps us to continuously improve!

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.