Road Top wireless carplay touch screen

Contents

Road Top 12.3" Ultra Touch Screen Car Multimedia System User Manual

For BMW 1/2/3/4 Series F20/F21/F22/F30/F31/F33/F34/F36

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and troubleshooting of your new Road Top 12.3" Ultra Touch Screen Car Multimedia System. This system is designed to enhance your driving experience with features like Wireless CarPlay, Android Auto, and a high-resolution display. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

Road Top 12.3 inch Car Multimedia Screen for BMW 1/2/3/4 Series 2012-2019
The Road Top 12.3" Car Multimedia Screen installed in a BMW dashboard, showcasing Wireless CarPlay and Android Auto interfaces, 1920*720 resolution, and a 1-year warranty.

1.1 Compatible Models

The Road Top 12.3" Car Multimedia System is compatible with various BMW 1, 2, 3, and 4 Series models. Please refer to the table below to confirm compatibility with your vehicle's system (NBT or EVO).

Compatible Model List for Road Top Car Multimedia Screen
Table detailing compatible BMW models and years for NBT and EVO systems, along with visual examples of NBT and EVO system dashboards.
SystemModelYear
NBT1 2 Series F20 F21 F22 F232012-2016
NBT3 4 Series F30 F31 F32 F33 F34 F362012-2016
EVO1 2 Series F20 F21 F22 F232016-2019
EVO3 4 Series F30 F31 F32 F33 F34 F362016-2019

2. Setup

2.1 Car Dashboard Removal

For detailed guidance on removing your car's dashboard, please refer to the instructional videos provided by scanning the QR codes in the original manual. These videos cover various car models to assist with the removal process.

2.2 Product List

The standard product package includes the following components:

  • Main Screen (Front and Back)
  • Mounting Bracket (may vary by model)
  • Power Cable
  • USB Cable
  • AUX Cable
Product Accessories List including screen, power cable, and USB cable
Visual representation of the main screen (front and back), power cable, and USB cable included in the product accessories list.

2.3 Ports Introduction

Before connecting any cables, ensure the car engine is switched off.

Main Screen Ports:

  • LVDS Cable Port
  • USB Cable Port
  • Power Cable Port

Power Cable Connections:

  • GND (Ground)
  • 5V-out
  • Rear Camera Input
  • ACC out (Accessory Power)
  • 360 DET (360-degree Detection)
  • Rear Camera PWR (Power)
  • Video In
  • Audio Out

2.4 Cables Connection Chart

For Cars with Original i-Drive:

If your car is equipped with an internal i-drive system, there is no need to install an additional i-drive unit or connect any cables specifically for the original i-drive.

For Cars without Original i-Drive:

If your car lacks an i-drive system, it is recommended to install an external i-drive. The connection diagram in the original manual illustrates the cabling solution for this scenario.

2.5 Resolution Setup

Before using the OEM system, you must set the correct screen resolution:

  1. Navigate to Setup > Car settings > Original Car's Screen Resolution.
  2. Select the resolution that matches your car's original screen.
  3. Important: After changing the resolution, restart your car for the changes to take effect.

2.6 Sound Setup

Optical Fiber Cable Installation:

  1. Unplug the original power cable from the head unit.
  2. Connect the original power cable to the new power cable harness.
  3. Plug the new power cable to the head unit.
  4. If your car has an optical fiber cable, carefully remove it from the original power cable and insert it into the new power cable harness.

GND Cable Connection:

  • For CCC and NBT systems: The GND cable should be connected together.
  • For CIC systems: Disconnect the GND cable to prevent sound distortion.

Sound Transmission Methods:

The system supports sound transmission via AUX cable and Bluetooth.

AUX Cable Transmission:
  1. AUX Cable Connection: You generally do not need to connect an external AUX cable to your car's AUX port, unless your car is a BMW 3/4 series or 1/2 series.
  2. AUX Setup Steps:
    1. From the main menu, click the "Original Car" logo to enter the original system interface.
    2. Navigate to "CD/Multimedia" or "Multimedia" and select "External devices".
    3. Choose "AUX front" as the sound transmission method.
    4. Keep the original system in "AUX front" status, then touch the screen to return to the Linux interface. AUX settings are now complete.
Bluetooth Transmission:
  1. First, connect your phone to the car's Bluetooth.
  2. Turn on the "Use Car's BT Channel" switch in the system settings to activate Bluetooth functionality.
  3. Set Bluetooth as the sound transmission method.

2.7 Camera and DVR Setup

Camera Type Selection:

  • For OEM Camera: Go to Setup > Car Settings > Reversing Settings > Camera Type and select "Original camera".
  • For Aftermarket Camera: Go to Setup > Car Settings > Reversing Settings > Camera Type and select "Aftermarket camera".

Camera Cables Connection:

  • Original Camera: No additional cable connection is needed.
  • Aftermarket Rear Camera (Automatic Transmission - AT): Connect "Rear-Camera" to "Rear-Camera-PWR".
  • Aftermarket Rear Camera (Manual Transmission - MT): Connect "Rear-Camera" to "360 DEL". This connection typically involves GND 12V- and reverse lamp 12V+.
  • Front Camera/DVR: Connect "Video-Input" to "Rear-Camera-PWR". The product currently supports DVRs with RCA ports.
  • 360 Camera: If the power cable lacks sufficient video input ports for multiple 360 cameras, an additional decoder is required to integrate all camera video feeds before connecting to the system's video input port.

Front-view Time Setup:

To activate the front camera, you must configure the "Front-view Time":

  1. Shift to reverse gear, then change to driving gear. The screen will enter the "Reversing Settings" interface.
  2. Set the "Front-view Time" to a duration between 0-20 seconds.

3. Operating Instructions

3.1 System Switching

To switch to the original car system, click the "Original Car Interface" icon on the main menu. You can return to the Linux system by touching anywhere on the screen.

3.2 Wireless CarPlay / Android Auto

Before setting up CarPlay or Android Auto, ensure your phone's Bluetooth connection to the car is disconnected.

  1. Turn on your mobile phone's Wi-Fi switch.
  2. Turn on your mobile phone's Bluetooth.
  3. Search for the product's Bluetooth device, named "CARKIT".
  4. Pair the Bluetooth connection.
  5. Allow the system to sync with your phone.
  6. Click "Allow" to enable the CarPlay or Android Auto function.
A demonstration video showcasing the Road Top multimedia screen's features, including its ultra-narrow black border, ultra-thin design, touch screen functionality, iDrive support, map navigation, music playback, steering wheel controls, voice control, hands-free phone calls, seamless switching to the original vehicle system, Airplay & Autolink support, and integration with OEM/aftermarket rear cameras.

3.3 Wired CarPlay / Android Auto

  1. Connect your phone to the product using a USB cable.
  2. The wired CarPlay / Android Auto function will then be available.

3.4 Air-Play

  1. Navigate to Setup > Smart Phone > Smart Phone List.
  2. Turn off "CarPlay" and turn on "Air-Play".
  3. Turn on the screen's Wi-Fi and connect it to your iPhone's personal hotspot.
  4. On your iPhone, open the shortcut menu bar, select "screen mirroring," and turn it on to use the Airplay function.
  1. Download the "Auto-link Pro" app on your Android phone. You can scan the QR code in the original manual to download the app.
  2. In the main interface, go to Setup > Smart Phone > Smart Phone List and turn on "Auto-link".
  3. Open the "Autolink Pro" app on your phone.
  4. Connect to "CAR-XXXX" (the device's name).
  5. Allow "Autolink Pro" to use the mirror link function.

4. Maintenance

4.1 Cleaning the Screen

To clean the screen, use a soft, lint-free cloth. For stubborn smudges, lightly dampen the cloth with water or a screen-safe cleaning solution. Avoid harsh chemicals or abrasive materials that could damage the display.

4.2 Software Updates

Periodically check for software updates to ensure optimal performance and access to new features. Update instructions will typically be provided with the software release.

5. Troubleshooting

5.1 Screen Display Issues

  • Screen Display Wrong (e.g., purple/green bars): This often occurs if a higher resolution is selected than your car's original screen supports (e.g., setting 1280*480 when the original is 800*480).
    Solution: Select the correct resolution matching your car's original screen resolution (refer to Section 2.5) and restart the car.
  • Half Screen Display Wrong: This can happen if a lower resolution is selected than your car's original screen supports (e.g., setting 480*240 when the original is 800*480).
    Solution: Select the correct resolution matching your car's original screen resolution (refer to Section 2.5) and restart the car.
  • Reverse Gear Screen Stays Pink: This indicates a potential issue with the camera signal or settings.
    Solution: Verify camera cable connections (Section 2.7) and ensure the correct camera type (OEM/Aftermarket) is selected in settings.

5.2 Sound Issues

  • Sound Distortion: For CIC systems, ensure the GND cable is disconnected to avoid this issue (refer to Section 2.6).
  • CarPlay Music Playback Issues (e.g., Spotify plays on phone but not screen):
    Solution: Double-check your sound transmission method (AUX or Bluetooth) settings (Section 2.6) and ensure the correct input is selected on your car's original system. For wireless CarPlay/Android Auto, ensure the car's native Bluetooth is disconnected before setup.

5.3 System Performance Issues

  • Linux System is Slow / System Gets Stuck: The native Linux system interface might experience occasional slowness. However, CarPlay and Android Auto should operate quickly.
    Solution: If the system is consistently stuck, try restarting the car. Ensure all connections are secure.
  • OEM Menu Not Working:
    Solution: Ensure the system is correctly switched to the original car interface (Section 3.1) and all original vehicle system functions are retained.

5.4 Other Issues

  • Original Car Microphone Not Supported: The product has a built-in microphone and does not support the car's original microphone.
  • Steering Wheel Control Buttons Not Fully Functional: The product supports the right-side buttons of the steering wheel control, but the left-side buttons may not work.

6. Specifications

FeatureSpecification
High-concerned chemicalNone
Warranty1 year
Built-in DVD PlayerNo
Built-in CD playerNo
Is touch screenYes
Built-in ScreenYes
TF/Micro SD Slot0
DinOne Din
InterfaceStandard
Operating SystemLinux
Voltage12 V
Item Weight2.7kg
Output TypeColored
Max External MemoryOther
Special Featureswifi function, Support 4G Network, Support Can-Bus, Support steering wheel control, Built-In Speaker/Microphone, Built-in GPS, Mobile Phone, MP3 players, Voice Control, CarPlay, Android Auto, Reversing Input
Digital Media FormatMp3, MP4, WMA, JPEG
OSD LanguageFrench, Spanish, Portuguese, German, Italian, English, Russian, Hebrew
Resolution1920*720
Display Size12.3''
Brand NameRoad Top
OriginMainland China
For Vehicle Brands/ModelBMW
BMW Model320i
320i-Year2014, 2015
ROM128G
CertificationCE
MaterialPlastic&ABS
SystemLinux
Modelwireless carplay touch screen
Product Name10.25inch bmw Carplay display
FitFor BMW F20 F30, for bmw F20 nbt system
Brandroad top carplay display
SupportWireless carplay, Wireless Android Auto, Reverse Camera Function, Steering wheel control, idrive knob control, Navigation maps, siri, USB play (music, video)
Keywordcarplay Monitor, carplay display bmw, carplay tablet monitor, bwm f30 radio screen, bmw f20 carplay, bwm f20 monitor, bmw f30 carplay

7. Warranty and Support

7.1 Warranty

This product comes with a 1-year warranty from the date of purchase.

7.2 Contact Us

If you require any assistance or encounter issues, please contact us via the purchase platform. To help us provide efficient support, please include the following information:

  • Your order ID.
  • Your car model and year.
  • A detailed description of the problem, including any relevant videos or pictures.

For additional item guides and documents, you may refer to the User Manual (PDF).

8. User Tips

  • Installation Persistence: While the provided instructions aim for clarity, some users have found external resources like YouTube videos helpful for detailed installation steps. Persistence is key, and the effort is often rewarded with a great screen experience.
  • Wireless Connectivity: The system supports wireless CarPlay and Android Auto without needing to connect to the car's AUX or USB ports for audio. Ensure you disconnect your car's native Bluetooth connection before setting up wireless CarPlay/Android Auto for a smoother experience.
  • Performance Expectation: The native Linux system interface might feel slow at times. However, CarPlay and Android Auto are designed to be very fast and responsive, offering a seamless experience for navigation and media.
  • Simultaneous AirPlay/CarPlay: Note that AirPlay and CarPlay/Android Auto are generally not designed to run simultaneously. You will need to switch between them in the settings.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.