KINGSOFE H7 H4 LED Headlight Bulbs

Contents

KINGSOFE LED Headlight Bulbs User Manual

Model: H1, H3, H4, H7, H11, H13, 9004, 9005, 9006, 9007

1. Introduction

Thank you for choosing KINGSOFE LED Headlight Bulbs. These high-power LED bulbs are designed to provide superior illumination for your vehicle, offering enhanced brightness and a longer lifespan compared to traditional halogen bulbs. This manual provides essential information for the safe and effective use of your new LED headlights.

KINGSOFE 240W 70000LM LED Headlight Bulbs
KINGSOFE 240W 70000LM LED Headlight Bulbs, offering +800% brightness.

2. Safety Information

Please read and understand all safety instructions before installation and use. Failure to follow these instructions may result in electrical shock, fire, and/or serious injury.

  • Always wear appropriate personal protective equipment (PPE) such as gloves and eye protection during installation.
  • Ensure the vehicle's ignition is off and the battery is disconnected before attempting any electrical work.
  • Do not touch the LED chips directly, as this can damage the bulb or affect its performance.
  • Keep the bulbs away from flammable materials.
  • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and receiver.
    • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for help.
  • Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.

3. Setup & Installation

The KINGSOFE LED Headlight Bulbs are designed for a quick and easy Plug-N-Play installation, often taking only 3 minutes per bulb. No complex wiring or structural modifications are typically required.

3.1. Installation Steps

  1. Ensure your vehicle is off and the battery is disconnected.
  2. Locate your vehicle's existing headlight bulb.
  3. Carefully remove the old halogen bulb from its housing.
  4. Insert the new KINGSOFE LED headlight bulb into the housing. Ensure it is seated correctly and securely.
  5. Connect the LED bulb's connector to your vehicle's headlight harness.
  6. Secure any dust caps or covers that were removed.
  7. Reconnect the battery and test the new LED headlights.
Video demonstrating the installation process for LED headlight bulbs.
3-Minutes Fast Installation diagram
Diagram illustrating the simple 3-minute fast installation process, highlighting the turbofan, built-in chip, and plug & play design.
LED vs Halogen brightness comparison
Visual comparison showing LED headlights are 400% brighter than halogen, with a super focused beam pattern and no dark spots.

4. Operating Instructions

Once installed, your KINGSOFE LED Headlight Bulbs operate like standard vehicle headlights, providing enhanced visibility and a crisp, clear light output.

  • Brightness: Experience 800% brighter illumination compared to halogen bulbs, with 70000LM output.
  • Color Temperature: Enjoy a cool white light at 6000K-6500K for improved clarity and reduced eye strain.
  • Beam Pattern: The bulbs feature a super focused beam pattern designed to eliminate dark spots and wavy light, providing a perfect beam shape.
  • Instant Start: Benefit from a 0.01s instant start, ensuring immediate full brightness.
  • Versatility: The Hi/Lo beam and wide vision capabilities make these bulbs suitable for various driving conditions, including urban roads, highways, and rural paths.
High beam vs Low beam comparison
Comparison of high beam and low beam illumination on a road at night.
Wide field of vision diagram
Diagram illustrating the wide field of vision provided by the 12 LED chips, ensuring smooth tangent without astigmatism.

5. Maintenance

KINGSOFE LED Headlight Bulbs are designed for minimal maintenance due to their robust construction and efficient cooling system.

  • Cleaning: Periodically clean the headlight lens to ensure maximum light output. Use a soft cloth and appropriate automotive cleaning solution.
  • Inspection: Regularly inspect the bulbs for any signs of damage or loose connections.
  • Lifespan: These bulbs have an extended lifespan of over 80,000 hours, significantly reducing the need for frequent replacements.
  • Waterproof: With an IP68 waterproof rating, the bulbs are protected against dust and water ingress, ensuring reliable performance in various weather conditions.

5.1. Heat Dissipation System

The bulbs incorporate an advanced heat dissipation system to maintain optimal operating temperature and extend lifespan:

  • Chips: LED chips generate heat when lit.
  • Conduction: Efficient heat conduction through quality materials.
  • Cooling: A built-in high-speed turbo cooling fan transfers heat from inside the product to the outside.
  • Unique Hollow-carved Heat Sink: Aviation aluminum body with a unique hollow-carved heat sink design efficiently improves heat dissipation.
Heat Dissipation Diagram
Diagram illustrating the heat dissipation process within the LED bulb.
Efficient Cooling System Diagram
Detailed view of the efficient cooling system, including the aviation-grade aluminum body, hollow-carved heat sink, and 15,000RPM silent turbofan.
IP68 Full Waterproof
Image demonstrating the IP68 full waterproof rating, suitable for rainy, foggy, and snowy conditions, with an operating temperature range of -45°C to +150°C.

6. Troubleshooting

If you encounter any issues with your KINGSOFE LED Headlight Bulbs, please refer to the following common solutions:

  • Bulb Not Lighting Up:
    • Check all connections to ensure they are secure.
    • Verify that the vehicle's headlight circuit is receiving power.
    • Ensure the bulb type matches your vehicle's requirements.
  • Flickering or Error Messages (Canbus Issues):
    • These bulbs feature Canbus chips designed to prevent error messages in most vehicles. If flickering or errors occur, ensure the Canbus function is compatible with your specific vehicle model.
    • Some sensitive vehicles may require an additional Canbus decoder (not included) to resolve issues.
  • Dim Light Output:
    • Ensure the headlight lens is clean and free from dirt or debris.
    • Verify the bulb is correctly seated and aligned in the housing.
    • Check the vehicle's voltage to ensure it is within the compatible range (12V-24V).
  • Radio Interference:
    • Refer to the FCC compliance notes in Section 2 for steps to mitigate potential radio or TV interference.

7. Specifications

Detailed technical specifications for KINGSOFE LED Headlight Bulbs:

Attribute Value
Brand NameKINGSOFE
Item TypeOther (Headlamp, Fog Lamp)
Wattage240W
Voltage12V-24V
Color Temperature6000K-6500K (Cool White)
Lumens70000LM
Light SourceLED 6500K COLD WHITE
Chip Assembly Type3570 CSP CHIP (2 Faces CSP Beads)
MaterialAviation Aluminum
Operating Temperature-45℃ ~ +120℃
Life SpanAbove 80,000 hours
Waterproof RatingIP68
CertificationE-Mark, CE, FCC, RoHS
Fit Plug TypesH1, H3, H4, H7, H11, H13, 9005 (HB3), 9006 (HB4), 9004 (HB1), 9007 (HB5)
CoolingBuilt-in driver, Cooling Fan (15,000RPM Silent Turbofan)
FunctionCanbus No Error, Real 1:1 Mini Size Design
OriginMainland China
Size display for various bulb types
Size dimensions for common bulb types: H7, 9006, 9005, H1, H4, H11.
Product Certificates
Certificates of Compliance including CE, FCC, and RoHS.

8. Warranty & Support

KINGSOFE LED Headlight Bulbs come with a 3-year warranty. For warranty claims or technical support, please contact your retailer or the manufacturer directly.

A detailed user manual in PDF format is available for further reference. You can view it here: User Manual (PDF).

9. User Tips

  • Confirm Bulb Type: Always double-check your vehicle's required bulb type (e.g., H7, H4, H13) before purchasing and installing to ensure compatibility.
  • Budget-Friendly Upgrade: These lamps offer a cost-effective upgrade for various car models, including older vehicles like VAZ or Chevrolet.
  • Installation Ease: The plug-and-play design makes installation straightforward, even for those without professional experience.
  • Brightness Expectations: While generally very bright, ensure proper installation and power supply if you perceive the light output to be weak.

10. Frequently Asked Questions (FAQ)

Q: How do I confirm the correct bulb size for my vehicle?
A: It is crucial to verify the exact bulb type required by your vehicle's manufacturer. You can usually find this information in your car's owner's manual, by checking the existing bulb, or using an online vehicle bulb lookup tool. For example, if you selected H13, please ensure your vehicle indeed uses H13 bulbs to avoid compatibility issues.

© 2024 KINGSOFE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.