Important Safety Warnings
This product has a built-in lithium battery. Please do not expose this product to strong sunlight, bake or throw it into a medium fire to avoid explosion. Please follow the safety instructions, otherwise it will cause fire, electric shock, damage or other injuries.
If the battery is not replaced properly, there will be an explosion hazard. Only the same type or equivalent type of battery can be used for replacement.
Product Overview
The Domars YYK-520 is a wireless ear-mounted headset designed for business use, featuring Bluetooth V5.1 for stable connectivity, hands-free calling, and noise reduction technology.
Components:
- MFB button (Multi-Function Button)
- Volume +/- buttons
- Switch (ON/OFF)
- Indicator light
- Ear cap
- Microphone
- Charging point
- Charging bin (case) with battery level display
Product Demonstration Video:
Setup and Pairing
Initial Use:
- Take the earbuds from the charging bin and peel off any protective film.
- Place them back into the charging bin; the earbuds will turn off and begin recharging automatically.
- When taken out from the charging bin, the earbuds will turn on automatically.
Pairing with a Device (One-Step Pairing):
- Ensure the headset is off. Press and hold the MFB button for approximately 3 seconds until the blue light comes on once, then the red and blue lights flash alternately. This indicates the headset is in pairing mode.
- Access the Bluetooth settings on your mobile phone/tablet/PC.
- Search for "YYK-520" in the list of available devices.
- Select "YYK-520" to connect. If prompted, enter the password "0000" (most modern devices do not require a password).
- After successful pairing, the headset indicator light will turn off. You can now make calls and listen to music.
Pairing with PC/Laptop:
Turn on the computer's Settings > Devices > Bluetooth & other devices. Initiate Bluetooth, then Add Bluetooth or other device. Search for "YYK-520" and connect. If your computer lacks Bluetooth, a Bluetooth adapter and driver may be required.
Pairing with Echo Device:
Activate Alexa App > Settings > Add New Devices > Bluetooth > Pairing New Devices. Search for "YYK-520" and connect.
Operating Instructions
Basic Functions:
- Power ON/OFF: Long press the ON/OFF switch for 3 seconds.
- Pause/Play: Click the switch.
- Answer Call: Click the MFB key.
- Hang Up Call: Click the MFB key.
- Refuse to Answer Call: Double click the switch.
- Cancel Call: Click the MFB key.
- Next Song: Click the Volume+ key.
- Last Song: Click the Volume- key.
- Volume Up: Long press the Volume+ button for 1 second.
- Volume Down: Long press the Volume- button for 1 second.
Advanced Call Functions:
- Third Party Call Handover: Click the MFB key.
- Continue Current Call & Close Third Party Call: Double click the MFB key.
- Hang Up Current Call & Switch to Third Party Call: Click the MFB key three times.
- Microphone On/Off: Long press the MFB key to hear a beep.
Voice Assistant Activation:
- Activate Siri/Google Assistant: Long press the ON button for 1 second.
Charging
Recharging the Earbuds:
- Place the headset in the charging bin. The headset will automatically turn off and begin charging.
- The digital display on the charging bin will show the current power level, indicating that the charging bin is charging the headset.
- When fully charged, the indicator light on the headset will turn off.
- A full charge takes approximately 1.5 hours.
Recharging the Charging Bin:
- Use a mobile phone adapter or a Type-C cable connected to a computer or other charger with a Type-C interface to recharge the charging bin.
- The digital display on the charging bin will indicate the recharging process. "100%" means fully recharged.
- A full charge for the charging bin takes approximately 1.5 hours.
Specifications
| Feature | Specification |
|---|---|
| Bluetooth Version | V5.3 |
| Bluetooth Support | A2DP, AVRCP, HFP, HSP, EDR |
| Communication Range | 10m |
| Frequency Band | 2.402GHz-2.480GHz |
| Electrical Impedance | 130±10% |
| Standby Time | 180 hours |
| Talk Time | 8-10 hours |
| Music Playing Time | 8-10 hours |
| Earbuds Battery Capacity | 60mAh |
| Host (Charging Case) Battery Capacity | 500mAh |
| Charging Bin Recharging Time | About 1.5 hours |
| Charging Time of Headset | About 1.5 hours |
| Weight | 71g |
| Active Noise-Cancellation | Yes |
| Volume Control | Yes |
| Style | Ear Hook |
| Material | Plastic |
Waterproof Specification:
Waterproof in daily activities (including sweating, raining, face-washing, and showering), except swimming in water. Note that the wireless signal of mobile phones cannot be transmitted in water, so it is not suitable for swimming or diving.
Troubleshooting
Why cannot I detect Wireless? / Why Wireless pairing failure?
- The Wireless range is 10m. Please ensure there are no obstacles and place your mobile phone close to the earbuds.
- If the earbuds are connected to other mobile phones or devices, please disconnect them first.
- Please reboot the Wireless device and reset the earbuds.
How to reset?
When the headset is off, press the ON/OFF key for 5 seconds. Put the headset into the charging compartment; the headset will automatically turn off and start charging. After taking out the headset, it will turn on automatically, and the reset is completed.
Why do the earbuds produce no sound? / Or, why does the music playing stop?
- Please ensure the headset is properly paired and connected to your device.
- Check the volume levels on both your device and the headset.
- Ensure there are no obstructions between the headset and the device.
- Try restarting both the headset and your device.
Why do the earbuds turn off automatically?
- Please ensure sufficient battery level.
- The earbuds will automatically disconnect from Bluetooth after 10 minutes of inactivity. Place the earbuds back into the charging bin and they will restart after recollecting.
Why cannot I recharge the charging bin?
- Please ensure the charging cable or mobile phone charger is in good condition and properly connected.
- To ensure proper connection, press the earbuds to fully connect the charging points to the charging bin.
- The earbud charging points might be stained with dust or sweat. When placing them into the charging bin for recharging, please clean with alcohol or a cloth.
- Please wipe any sweat on the earbuds before putting them into the charging bin.
Maintenance
Safety Precautions for Longevity:
- Please keep away from high temperature, high humidity, and corrosive environments.
- Avoid bumping, falling, bending, scalding, etc.
- Do not disassemble the earbuds or charging bin.
- Do not overcharge for a long time, as this will shorten the service life of the battery.
- Please use a certified DC 5V-1A adapter from the manufacturer under the supervision of regulatory authorities.
- In case of non-use for over a month, please charge regularly for maintenance.
- Repeated charging and discharging will impair battery performance over time, which is normal for all rechargeable electronic products.
User Tips
- For optimal sound quality and call clarity, ensure the ear cap fits snugly in your ear.
- Regularly clean the ear caps and charging points with a soft, dry cloth to prevent debris buildup.
- When experiencing connection issues, a quick reset of the headset and restarting your device can often resolve the problem.
- To maximize battery life, avoid completely draining the battery before recharging.
Warranty and Support
For detailed warranty information and further support, please refer to the official user manual PDF provided by the manufacturer. You can access the PDF document here.
If you experience any discomfort or pain while using the product, please stop using it immediately.