Precision Scale Pocket Scale 0.001g

Contents

Digital Precision Jewelry Scale User Manual

Model: Pocket Scale 0.001g

1. Important Safety Information

Please read this manual carefully before operating your new digital precision scale. Keep this manual for future reference.

Warnings:

  • "Lo" Display: Indicates low battery voltage. Please replace the batteries promptly.
  • "O-Ld" Display: Indicates an overload condition. Remove the item from the scale quickly to prevent damage.

2. Package Contents

Your package should contain the following items:

  • Digital Precision Scale with transparent windshield
  • Small weighing tray
  • Calibration weight (e.g., 50g, depending on model)
  • Tweezers (may be included)
Digital precision scale with various items like jewelry, a coin, calibration weight, and tweezers.
Figure 1: Digital precision scale and included accessories.

3. Setup and First Use

3.1 Battery Installation

This scale requires 2 x AAA batteries (not included). Open the battery compartment on the underside of the scale and insert the batteries, observing the correct polarity.

3.2 Placement

For accurate readings, place the scale on a firm, flat, and level surface. Avoid placing it near vibrating equipment, strong electromagnetic fields, or in direct sunlight or drafts.

3.3 Initial Power On

  1. Ensure the scale is on a stable surface.
  2. Press the ON/OFF key to turn on the scale.
  3. Wait for the LCD display to show "0.000" (or "0.0000" depending on precision) before weighing.
Video 1: Product demonstration showing power on, unit selection, and tare function.

Video Description: This video demonstrates the scale's features, including its high precision (0.001g), the transparent windshield, power-on sequence, unit switching between grams, ounces, carats, etc., the tare function using the included small tray, and its capacity up to 100 grams.

4. Operating Instructions

4.1 Power ON/OFF

Press the ON/OFF key to turn the scale on or off.

4.2 Unit Selection

  1. With the scale on and displaying zero, press the MODE key.
  2. Each press will cycle through available weighing units: grams (g), ounces (oz), troy ounces (ozt), pennyweights (dwt), carats (ct), and grains (gn). Select your desired unit.
Scale display showing different unit options: g, oz, ozt, dwt, ct, gn.
Figure 2: The scale's display showing various selectable weighing units.

4.3 Weighing Items

  1. Place the scale on a leveled surface and turn it on.
  2. Wait until the LCD display shows zero.
  3. Gently place the item to be weighed in the center of the weighing platform.
  4. Wait for the reading to stabilize on the LCD display.

4.4 Tare Function (Zeroing a Container)

The tare function allows you to subtract the weight of a container, so only the weight of the contents is measured.

  1. Turn on the scale and wait for it to display zero.
  2. Place the empty container (e.g., the small tray) on the weighing platform. The display will show the container's weight.
  3. Press the TARE key. The display will reset to zero.
  4. You can now add items to the container, and the scale will display only the net weight of the items.

4.5 Counting Function (PCS)

This function is useful for counting multiple items of the same weight.

  1. Turn on the scale and wait for it to display zero.
  2. Prepare a sample quantity of items (e.g., 25, 50, or 100 pieces).
  3. Place the sample quantity on the weighing platform.
  4. Press and hold the PCS key until the number corresponding to your sample (e.g., "25") is displayed.
  5. If the displayed quantity is different from your sample, press the MODE key to switch to the correct sample quantity, then press PCS to confirm.
  6. Remove the sample. You can now place any quantity of the same items on the scale, and the display will show the count.

5. Calibration Function

Note: This function should only be used if the scale is consistently inaccurate. Improper calibration can lead to further inaccuracies. Use the provided calibration weight.

  1. Power on the scale and wait for it to display zero.
  2. Long press the MODE button until "CAL" appears on the display.
  3. Press TARE to select the weight of the corresponding calibration weight (e.g., 50.000g).
  4. Press the MODE key again. The displayed value will flash.
  5. Place the exact calibration weight (e.g., 50g) onto the center of the weighing platform.
  6. Wait for "PASS" to appear on the screen. The calibration is complete. Remove the weight and turn off the scale.

6. Maintenance and Service

6.1 General Care

  • Avoid extreme temperatures (hot or cold) and high humidity. Allow the scale to adapt to normal room temperature before use.
  • Keep the scale clean and dry. Humidity can affect accuracy.
  • Handle with care. Although durable, rough operation, shaking, or dropping can damage internal components.

6.2 Battery Care (for charging type only)

  • If the scale is not used for an extended period, charge it every 45-60 days to prevent damage to the internal lithium battery.
  • Do NOT use chargers with an output above 5V. Using an incorrect charger can damage the device and voids any potential warranty.

7. Troubleshooting

ProblemDisplaySolution
Low Battery"Lo"Replace the AAA batteries.
Overload"O-Ld"Remove the item from the platform immediately.
Inaccurate ReadingsInconsistent weightEnsure scale is on a level, stable surface. Recalibrate the scale using the calibration function. Avoid drafts or vibrations.
Scale Does Not Turn OnBlank displayCheck battery installation and ensure batteries are fresh.

8. Specifications

FeatureDetail
Model NumberPocket Scale 0.001g
Capacity & PrecisionVarious models available (e.g., 100g/0.001g, 50g/0.001g, 20g/0.001g, 10g/0.001g). Subject to purchased specifications.
Weighing Unitsg, oz, ozt, dwt, ct, gn
DisplayLCD with backlight
Auto-Off180 seconds of inactivity
Power Source2 x AAA batteries (not included)
Operation Temperature10°C to 30°C (50°F to 86°F)
MaterialStainless steel platform
FeaturesLED Display, With Scale Tray, With Lid, Mini, Transparent Windshield
CertificationsCE, WEEE, RoHS
Dimensions (Approx.)11cm (L) x 6.3cm (W) x 3cm (H) - Scale body
7cm (H) with lid closed, 4.5cm (D) - Side view
Diagram showing the dimensions of the digital scale: 11cm length, 6.3cm width, 3cm height, 7cm total height with lid, 4.5cm depth.
Figure 3: Approximate dimensions of the digital precision scale.

9. User Tips

  • Always use the scale on a perfectly flat and stable surface to ensure maximum accuracy.
  • Avoid placing the scale in areas with air currents (e.g., near open windows or air conditioning vents) as this can affect sensitive readings.
  • Handle the scale gently. Sudden impacts or dropping can damage the internal sensors.
  • For best results, allow the scale to warm up for a few seconds after turning it on before taking measurements.

10. Warranty and Support

For warranty information and customer support, please refer to the seller or your purchase documentation. Keep your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.