VILCORN SZ-5005B

Contents

VILCORN RGB Wireless Gamepad User Manual

Model: SZ-5005B

1. Safety Information

Before using this product, please read this manual carefully to understand its compatible hardware and operating instructions. Please keep this manual for future reference.

General Safety Precautions:

  • Keep this product out of reach of young children. Small parts may be swallowed, leading to injury or product damage.
  • This product contains a lithium battery. Improper use can lead to fire or explosion. Do not heat, open, puncture, damage, or dispose of the product or battery in fire.
  • Do not touch the product with wet hands to prevent liquid from entering the product and causing damage.
  • Do not disassemble, repair, or modify this product without authorization, as this may cause further damage or pose a risk of battery explosion or fire.
  • When connecting the product to a host, ensure the interface is free of dust or foreign objects. Do not allow liquids or small particles to enter the product.
  • Do not expose the product to dust, smoke, or steam.
  • Do not expose the product to high temperatures, high humidity, or direct sunlight, as this may cause battery damage or melting.

2. Product Overview

This VILCORN wireless gamepad is designed for use with PS5 series consoles and is compatible with PC (Windows 10 and above), MAC, iOS, Android 10 and above systems, and Steam Deck. It supports SENSOR and vibration functions on PS5 consoles.

2.1. Controller Layout

The diagram below illustrates the main components and buttons of the gamepad.

VILCORN RGB Wireless Gamepad showing front and back views with labeled buttons
Figure 1: Gamepad Layout (Front and Back)
  • Front View: Touchpad, SHARE button, OPTIONS button, Directional Pad, L3 (Left Stick Press), R3 (Right Stick Press), Action Buttons (X, O, Square, Triangle), Home Button, Turbo Button, Headphone Jack.
  • Rear View: R1, R2 (Hall Trigger), L1, L2 (Hall Trigger).

3. Key Features

  • Multi-Platform Compatibility: Supports PS5 series consoles, PC (Windows 10 and above), MAC, iOS, Android 10 and above systems, and Steam Deck.
  • Audio Jack: Features a 3.5mm audio jack for headphone audio and microphone support. Built-in speaker.
  • Lighting Effects: Individual channel light indicators, adjustable RGB lighting effects, TURBO frequency, and motor vibration intensity adjustment.
  • Six-Axis Function: Equipped with 3D-Sensor and G-Sensor for precise motion control.
  • Touchpad: Supports two-point capacitive sensing touchpad.
  • Wired Connection & Charging: Supports TYPE-C USB wired connection and charging.
  • Firmware Updates: The gamepad firmware can be updated via PC USB wired connection.
  • Battery: Built-in 1000 mAh internal battery. Charging time: 2-3 hours. Usage time: 8-10 hours.

4. Setup and Connection

4.1. PS5 Console Connection

If the gamepad has not been previously connected to this PS5 console or has been connected to another console, you need to establish a wired connection first. During the wired communication, the system will automatically pair the gamepad. After successful pairing, unplug the USB cable, and the gamepad can then be used wirelessly via Bluetooth by pressing the HOME button.

  • When connected via USB, pressing the HOME button will show a solid color on the LED channel indicator, indicating a successful connection.
  • If multiple gamepads are connected to the console, the LED channel indicators will display different colors to distinguish players.
  • On PS5, the gamepad supports voice functions and axis sensor functions, including the two-point capacitive sensing touchpad.
Diagram showing steps to connect the gamepad to a PS5 console
Figure 2: PS5 Connection Steps
  1. Connect the USB cable to your PS5 console.
  2. Plug the other end of the cable into the game controller.
  3. Press and hold the "home" button for 1 second.
  4. Wait for the connection to establish.
  5. Once connected successfully, unplug the USB cable to use it wirelessly.

Important Note: First connection requires a data cable for initial setup. Subsequent connections: Press Home to auto-reconnect instantly. Initial pairing requires a data cable; after successful connection, press Home for automatic reconnection.

4.2. Windows PC Connection

Bluetooth Pairing:

  • With the gamepad powered off, press and hold the SHARE button, then press the HOME button (SHARE + HOME) for 3 seconds to enter pairing mode. The LED channel indicator will flash blue.
  • On your PC, open Bluetooth settings and search for devices. Select "DualSense Wireless Controller" from the list and click to pair.
  • After successful pairing, the corresponding LED channel indicator will be solid blue.
  • Note: Your desktop PC must have Bluetooth functionality.

USB Wired Connection:

  • With the gamepad powered off, connect it to your PC via a USB cable. The gamepad will default to PS5 "DualSense Wireless Controller" mode, with the LED channel indicator showing solid blue. It supports headphone audio and voice functions.
  • Press and hold (SHARE + OPTIONS) for 3 seconds to switch to X-INPUT (PC360) mode. The LED channel indicator will show solid green.

4.3. Android Platform Connection

  • With the gamepad powered off, press and hold the SHARE button, then press the HOME button (SHARE + HOME) for 3 seconds to enter pairing mode. The LED channel indicator will flash blue.
  • On your Android device, search for Bluetooth devices and select "DualSense Wireless Controller" to connect. The LED channel indicator will show solid blue. If pairing times out, the gamepad will power off after approximately 60 seconds.

4.4. iOS Platform Connection

  • Ensure your iPhone or iPad device is running iOS 13 or higher.
  • With the gamepad powered off, press and hold the SHARE button, then press the HOME button (SHARE + HOME) for 3 seconds to enter pairing mode. The LED channel indicator will flash blue.
  • On your iPhone or iPad, go to Settings > Bluetooth, turn on Bluetooth, and find "DualSense Wireless Controller". Select it to pair. After successful pairing, the corresponding LED channel indicator will be solid.
  • Note: If pairing times out, the gamepad will power off after approximately 60 seconds. Only MFI (Made For iPhone/iPad) games are supported.

4.5. Mac Computer Connection

Bluetooth Pairing:

  • On your Mac, go to System Preferences > Bluetooth. Click "Turn Bluetooth On". The Bluetooth device indicator will flash continuously, indicating it's in pairing mode.
  • With the gamepad powered off, press and hold the SHARE button, then press the HOME button (SHARE + HOME) for 3 seconds to enter pairing mode. The LED channel indicator will flash blue.
  • In Bluetooth preferences, your Mac will find "DualSense Wireless Controller". Select it to pair. After successful pairing, the corresponding LED channel indicator will be solid.

USB Wired Connection:

  • With the gamepad powered off, connect it to your Mac via a USB cable. The gamepad will default to PS5 "DualSense Wireless Controller" mode, with the LED channel indicator showing solid blue. Wired connection supports headphone audio and voice functions.

4.6. Steam Deck Console Connection

Bluetooth Connection:

  • With the gamepad powered off, press and hold the SHARE button, then press the HOME button (SHARE + HOME) for 3 seconds to enter pairing mode. The LED channel indicator will flash white.
  • On your Steam Deck, search for Bluetooth devices and select "DualSense Wireless Controller" to pair. After successful pairing, the corresponding LED channel indicator will be solid. If pairing times out, the gamepad will power off after approximately 60 seconds.

Wired Connection:

  • Connect the gamepad to the Steam Deck console using a Type-C adapter. The adapter needs to have a Type-C to USB-A female port and OTG functionality (adapter needs to be purchased separately).
  • The gamepad can switch between PS5 wired mode and X-input mode. Audio functions are supported in PS5 wired mode.

5. Operating Instructions

Video 1: VILCORN PS5 BT Controller in action, demonstrating gameplay and RGB lighting effects.

5.1. TURBO Function Settings

After connecting the gamepad to the host, you can perform Turbo and Clear operations on the following buttons as needed: X, O, Square, Triangle, L1, L2, R1, R2.

  • TURBO Target Buttons: X, O, Square, Triangle, L1, L2, R1, R2. Press the action button + Turbo button to cycle through Turbo functions: Turbo On - Auto Turbo - Turbo Off.
  • Operation Example: Long press the target button, then press the Turbo button to activate Turbo for that target button. The gamepad channel indicator will flash to indicate the current TURBO frequency level.
  • When the gamepad is powered off, previously set Turbo functions will not be saved, and the default state will be restored (frequency of 10 times/second).
  • Adjusting TURBO Speed: There are three levels (5-10-15HZ). Press TURBO + Right 3D stick UP to increase speed, and TURBO + Right 3D stick DOWN to decrease speed. The default is the middle level.

5.2. Macro Programming (M1/M2/LIGHT)

The gamepad supports programming for the following buttons: X, O, Square, Triangle, L1, L2, R1, R2, D-pad (UP/DOWN/LEFT/RIGHT), Left Stick, Right Stick (8 directions when rotated). It also records button press and release times.

Diagram showing M1/M2 Macro Programming buttons on the back of the controller
Figure 3: M1/M2 Macro Programming

Operation Example:

  1. Press and hold the LIGHT button for 3 seconds. The channel indicator will flash slowly, and the motor will vibrate, indicating the gamepad has entered programming mode.
  2. Press any action button you wish to program (map). The channel indicator will flash quickly when a button is pressed, and slowly when released, recording the press and release times. After recording, press either M1 or M2 on the back of the gamepad. The channel indicator will light up solid, and the motor will vibrate, indicating successful button programming. The selected M1/M2 button is now a macro button. If you press more than 16 times, the channel indicator will stop flashing quickly, indicating that the macro programming limit (16 key values) has been reached.
  3. If no button is pressed within 8 seconds after entering macro editing mode, the gamepad will retain previous settings and automatically exit editing mode. If a single button is pressed, it will be mapped. If M1 and M2 are both mapped, they will both function simultaneously. If M1/M2 is programmed with multiple buttons (macro), pressing M1/M2 will trigger the macro function, and pressing M1/M2 again can interrupt the macro function.

Clearing Macro Programming:

  • Press and hold the LIGHT button for 3 seconds. The channel indicator will flash slowly, and the motor will vibrate, indicating the gamepad has entered programming mode. Directly press M1 or M2. The channel indicator will light up solid, and the motor will vibrate, indicating that the macro setting has been cleared.
  • Note: The programming buttons are initially unassigned from the factory. Users need to set them up themselves. Programmed buttons have memory.

5.3. RGB Lighting Settings

Diagram showing adjustable colored lights on the gamepad with three lighting modes and seven colors
Figure 4: Adjustable Colored Lights
  • Simultaneously press LIGHT + R3 (Right Stick Press, gamepad vibrates once) to cycle through lighting modes (Solid Color - Colorful Cycle - Single Color Breathing Cycle).
  • In Colorful Cycle mode, simultaneously press LIGHT + L3 (Left Stick Press, gamepad vibrates once) to pause the current colorful lighting effect. Press again to resume.
  • In Solid Color mode, simultaneously press LIGHT + L3 (Left Stick Press, gamepad vibrates once) to cycle through light colors (Pink-Blue, Blue, Light Green, Green, Cyan, Purple, Pink, Red).
  • In Single Color Breathing Cycle mode, simultaneously press LIGHT + L3 (Left Stick Press, gamepad vibrates once) to pause the current breathing state. Press again to resume.
  • In Solid Color Breathing Cycle mode, simultaneously press LIGHT + L3 (Left Stick Press, gamepad vibrates once) to cycle through light colors (Pink-Blue, Blue, Light Green, Green, Cyan, Purple, Pink, Red).
  • In Colorful Cycle, Solid Color, and Single Color Breathing modes, adjust RGB lighting brightness by simultaneously pressing LIGHT + (D-pad UP/DOWN). Each press adjusts brightness by one level. LIGHT + UP increases brightness, LIGHT + DOWN decreases brightness (brightness settings are memorized).
  • Press and hold L3 + R3 for 3 seconds (gamepad vibrates once) to turn RGB lighting on or off. Lighting settings are memorized and will automatically save the current lighting mode (e.g., Solid Color, Colorful Cycle, Single Color Breathing).

5.4. Motor Vibration Intensity Adjustment

Diagram showing vibration feedback and 6-axis gyro sensor
Figure 5: Vibration Feedback & 6-Axis Gyro Sensor
  • Press TURBO + Left 3D stick UP to increase vibration intensity.
  • Press TURBO + Left 3D stick DOWN to decrease vibration intensity.
  • There are 4 intensity levels: 100%, 75%, 50%, 0%. Motor vibration settings are memorized.

5.5. Multi-function Touchpad

Diagram showing touchpad functions: drag and drag, slide touch, multipoint
Figure 6: Multi-function Touchpad

Slide your finger on the touchpad to perform operations such as menu selection, map zooming, etc. It can also be used for drawing and writing.

5.6. 3.5mm Stereo Audio Jack

Diagram showing the 3.5mm stereo audio jack on the gamepad
Figure 7: 3.5mm Stereo Audio Jack

You can connect headphones through this jack to enjoy game sound effects without disturbing others. (No microphone support).

5.7. Turbo Burst Function

Diagram showing the Turbo Burst Function with rockets indicating rapid fire
Figure 8: Turbo Burst Function

The powerful trigger makes it easier to play arcade or action games with rapid fire capabilities.

5.8. Trigger and 3D Stick Calibration

  • The gamepad is calibrated at the factory, and users generally do not need to recalibrate it.
  • If deviations are noticed after a period of use, recalibrate as follows: With the gamepad powered off, press and hold "SHARE + OPTIONS", then insert the USB cable. The channel indicator will flash quickly. Lightly press the L2/R2 triggers 2-3 times to their full extent. Rotate the 3D sticks 2-3 times at their maximum angle. Finally, long press the X button for 1 second to confirm. The channel indicator will light up solid, indicating successful calibration. The settings will be saved.

5.9. Sensor Calibration

  • The gamepad's sensors are automatically calibrated at the factory.
  • If sensor drift occurs during use, connect the gamepad to the device (wired or wireless) and place it horizontally. Then, press and hold "SHARE +" for 3 seconds. The indicator light will flash quickly, and the gamepad will enter sensor calibration mode. When the indicator light stops flashing, calibration is complete.

5.10. Reconnection Mode

Bluetooth Reconnection:

  • For gamepads previously paired with a host, short press the HOME button while the gamepad is off to reconnect to the last paired host.
  • If the PS5 host is in sleep mode, short pressing the gamepad's HOME button can wake up the host.
  • If reconnection fails after 15 seconds, the gamepad will automatically power off.
  • Note: Reconnection mode only supports reconnecting to the last paired host.

5.11. Power Indicator

  • When the gamepad battery is low, the PS5 host will display a low battery warning. Please charge the gamepad promptly.

5.12. Charging Function

  • Charge the gamepad using a TYPE-C charging cable.
  • When charging while the gamepad is off, the LED channel indicator will display an orange breathing light. When fully charged, the indicator will turn off.
  • When charging while the gamepad is connected and operating, the current LED channel indicator will remain solid.
  • The gamepad can be charged via a PS5 host, PC USB port, or a 5V 1A charger.

5.13. Power On/Off and Sleep Mode

  • Power On/Off: Short press the HOME button to power on and automatically enter reconnection mode. Long press the HOME button for 10 seconds to power off the gamepad.
  • Sleep Mode: In Bluetooth wireless connection state, you can set the gamepad's power-off time via the PS5 host (usually 10 minutes/30 minutes/60 minutes/never power off).
  • If the host enters sleep mode or pairing times out after 60 seconds, the gamepad will automatically enter sleep mode.

5.14. Gamepad Reset Function

  • If the gamepad malfunctions or freezes, you can reset it by pressing the button inside the reset hole on the bottom of the gamepad with a thin needle-like object.

6. Care and Maintenance

  • Do not allow the interface to come into contact with any metal objects.
  • Do not place any objects on top of this product.
  • Do not stand on this product.
  • Do not throw or drop this product, or apply excessive force in any other way.
  • Do not place this product on unstable, tilted, or vibrating surfaces.
  • Follow these instructions to help prevent the product surface from aging or fading:
    • Wipe with a soft, dry cloth.
    • Do not place any rubber or vinyl materials on the product surface to prolong its lifespan.
    • Do not use solvents or other chemicals.
    • Do not wipe with chemically treated cloths.

7. Troubleshooting

Q1: The gamepad cannot connect to the host?

  • A1: Ensure your PS5 host is powered on. Check if it has been paired with the host before; if not, pair it with the host first.
  • A2: Ensure the PS5 host is correctly set up for USB communication.
  • A3: Ensure the USB cable is correctly connected to the corresponding TYPE-C USB port on the host.

Q2: The gamepad is connected to the PS5 host but has no function?

  • A1: When multiple gamepads are connected, confirm that the one you are using is designated as Player #1.

8. Product Specifications

Attribute Value
Product Name PS5 Bluetooth Controller
Model SZ-5005B
Battery Specification 3.7V 1500mAH Lithium Battery
Charging Voltage DC5V
Charging Current ≈500mA
Charging Time ≈3.5 hours
Operating Distance 10m
Audio Distance 6m
Operating Voltage/Current 3.3V / ≈170mA
Static Operating Current 20μA
Battery Included Yes
High-concerned chemical None
D-pad Switch Type Membrane
ABXY Switch Type Membrane
Bumpers Switch Type Membrane
Trigger Button Type Non-Linear
Compatible Platform PC, PS5 Slim, PS5 Pro, PS5
Package Yes
Interface Type Bluetooth
Origin Mainland China
Type Gamepads

9. User Tips

  • For optimal performance, ensure the gamepad is fully charged before extended gaming sessions.
  • If experiencing input lag or disconnection, try re-pairing the controller or using a wired connection.
  • The Q&A mentions "Hall effects?". While not explicitly stated in the manual, this implies the joysticks might use Hall effect sensors, which are known for their durability and precision, reducing stick drift over time. This is a potential benefit for users.

10. Support

For further assistance or detailed information, please refer to the official product documentation. A user manual in PDF format is available for download:

User manual (PDF): View PDF

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.