1. Introduction
Thank you for choosing the Staniot LoRa Version Entry Sensor. This contact sensor is designed to enhance the security of your home by detecting the opening and closing of doors and windows. It operates with low power consumption, offering a standby time of approximately 5 years.
Important Compatibility Note:
This Door Sensor is a LoRa version and is designed to work exclusively with the staniot Secpanel 7 Pro alarm control panel. It is NOT compatible with staniot Secpanel 7, Secpanel 5, Secpanel 3, or other 433MHz Alarm Hosts. Please ensure you have the correct alarm panel for this sensor.

For additional video guides and support, please visit the Staniot YouTube channel: https://www.youtube.com/channel/UC0omnisV9_rZOcGsSMH1hLQ
2. Product Overview
The Staniot LoRa Entry Sensor utilizes advanced LoRa technology for reliable and long-range wireless communication, making it ideal for various home environments.
Key Features:
- New LoRa Technology
- 500m Long-range Connection
- Stable Connection with strong penetration and encrypted communication
- 5-year Battery Life (powered by 2x CR2450 batteries)
- Low Power Consumption
- Anti-dismantling alarm

Image: LoRa Technology Overview

Image: Home Alarm System with LoRa Long-range Connection
Design and Components:
The sensor features a simple and elegant design that blends seamlessly with various home decoration styles. It consists of two main parts: a transmitter (large) and a magnet (small).

Image: Sensor Components (Front and Back View)
- Indicator: Provides visual feedback on sensor status.
- Setting Button: Used for pairing and other configurations.
- Screw Holes: For secure mounting with screws.
- Magnet: The smaller part that triggers the sensor when separated from the main unit.
- Battery: Located in the main unit.
3. Setup and Installation
Follow these steps to install and pair your Staniot LoRa Entry Sensor with your Secpanel 7 Pro alarm control panel.
Installation Steps:
- Prepare the Surface: Choose a clean, dry area on your door or window frame for installation. Wipe the surface clean to ensure proper adhesion.
- Mount the Sensor: You can mount the sensor using either double-sided tape (applied to the bottom of both parts) or screws.
- Positioning: Install the door sensor transmitter (large part) and the door sensor magnet (small part) separately on the door/window and its frame. Ensure the distance between the two parts is less than 0.7 inches (approximately 1.78 cm) when the door/window is closed.

Image: Sensor Installation on a Door/Window
Pairing with Secpanel 7 Pro:
The sensor must be paired with your alarm control panel. Refer to the video below for a visual guide on the pairing process.
Video: Pairing and Testing the Staniot LoRa Entry Sensor with the Alarm Panel. This video demonstrates how to add the sensor to the system and test its functionality.
General Pairing Steps (refer to your Secpanel 7 Pro manual for detailed instructions):
- Access the 'Connection' or 'Accessory' menu on your Secpanel 7 Pro.
- Select 'Sensor' and then choose 'Entry' to add a new entry sensor.
- The panel will prompt you to 'Please trigger the accessory'.
- Separate the two parts of the entry sensor (or press the pairing button if available) to send a signal to the panel.
- The panel should confirm successful pairing.

Image: Sensor Working with Security Panel and Mobile App
4. Operation
Once installed and paired, the Staniot LoRa Entry Sensor operates automatically to monitor your doors and windows.
- Monitoring: When the alarm system is armed, the sensor continuously monitors the state of the door or window it is attached to.
- Triggering an Alarm: If the two parts of the sensor are separated (i.e., the door or window is opened) beyond the 0.7-inch threshold while the system is armed, the sensor will trigger an alarm on your Secpanel 7 Pro.
- Notifications: Depending on your alarm panel's configuration, you may receive notifications on your smartphone or other connected devices when an alarm is triggered.

Image: Continuous Monitoring of Door/Window
5. Maintenance
Battery Replacement:
The Staniot LoRa Entry Sensor is powered by two CR2450 lithium batteries, offering an estimated 5-year battery life due to its low power consumption. When the battery level is low, your alarm panel should indicate this. To replace the batteries:
- Locate the back cover of the main sensor unit.
- Slide the back cover in the direction indicated by any arrows or grooves to remove it.
- Carefully remove the old CR2450 batteries.
- Insert two new CR2450 3V lithium batteries, ensuring correct polarity (+/-).
- Replace the back cover by sliding it back into place until it clicks securely.

Image: Battery Compartment with 2x CR2450 Batteries

Image: Lower Power Consumption Feature
6. Troubleshooting
- Sensor not pairing: Ensure your alarm panel is the Staniot Secpanel 7 Pro. Double-check that you are following the correct pairing procedure as outlined in the manual and video. Try re-triggering the sensor multiple times during the pairing process.
- False alarms: Verify that the sensor and magnet are securely mounted and the gap between them is consistently less than 0.7 inches when the door/window is closed. Check for any loose connections or obstructions.
- No alarm when triggered: Ensure the alarm system is armed (Away or Home mode). Check the sensor's battery level. Confirm the sensor is correctly paired and recognized by the alarm panel.
- Signal issues: While LoRa offers long range and strong penetration, extreme distances or significant metal obstructions can still affect performance. Try repositioning the sensor or the alarm panel if experiencing consistent signal loss.
7. Specifications
| Parameter | Value |
|---|---|
| Battery Specification | CR2450 × 2 |
| Standby Current | ≤ 1μA |
| Alarm Current | ≤ 20mA |
| Working Temperature | -10°C ~ +50°C |
| Relative Humidity | <95% |
| Wireless Parameters | LoRa, 433MHz, eV1527 |
| Wireless Distance | 500m (open area) |
| Product Size (Large part) | 70 × 31.5 × 15.5mm |
| Product Size (Small part) | 70 × 11 × 13.5mm |

Image: Product Parameters Table

Image: Product Dimensions
8. User Tips
- Users have reported excellent performance with the LoRa sensor, noting its effective long range and stable signal, even through intermediate walls.
- The sensor is generally quick to connect and easy to implement with the compatible Staniot LoRa panel.
- Its low power consumption is a frequently praised feature, contributing to its long battery life.
- Installation is straightforward, whether using the adhesive backing or securing with screws.
9. Warranty and Support
For warranty information, technical support, or further assistance, please refer to the documentation provided with your Staniot Secpanel 7 Pro alarm system or contact Staniot customer service. Additional video guides and troubleshooting tips may be available on the official Staniot YouTube channel.