LEXXSON Chrysler 300 Series Retrofit Kit

Contents

LEXXSON Wireless CarPlay Android Auto Retrofit Kit Decoder Box

User Manual for Chrysler 300 Series (2011-2016)

This manual provides detailed instructions for the installation, operation, and troubleshooting of your new LEXXSON Wireless CarPlay Android Auto Retrofit Kit Decoder Box.

1. Introduction

The LEXXSON Wireless CarPlay Android Auto Retrofit Kit Decoder Box is designed to seamlessly integrate Apple CarPlay and Android Auto functionalities into your Chrysler 300 Series vehicle (model years 2011-2016) while retaining the original car screen and all factory functions. This smart module enhances your driving experience by providing access to navigation, music, communication, and voice control features directly from your smartphone.

Key features include:

  • Wireless and wired Apple CarPlay and Android Auto support.
  • Intelligent voice control (Siri/Google Assistant).
  • Support for reversing video input (rear-view camera).
  • Wired and wireless screen mirroring for iPhone and Android phones.
  • USB media playback for video and audio files.
  • Lossless installation, preserving original car functions.

2. Kit Contents

Please verify that all the following components are included in your package:

  • CarPlay Decoder Box
  • Power Cable Harness
  • LVDS Cable
  • WiFi Antenna
  • USB-AV Cable
  • Mic Cable
  • AUX Cable
Diagram showing all components included in the kit: CarPlay decoder box, power cable harness, LVDS cable, WiFi antenna, USB-AV cable, Mic cable, and AUX cable.
Figure 2.1: LEXXSON Retrofit Kit Components

3. Setup and Installation

Careful installation is crucial for optimal performance. If you are unsure about any steps, please consult a professional installer.

3.1 Toggle Switch Configuration (DIP Switches)

Locate the toggle (DIP) switches on the CarPlay decoder box. These switches must be set according to your car's screen size. For an 8.4-inch screen (640x480 resolution), use the following settings:

Image showing the toggle (DIP) switches on the decoder box and a table for setting them for an 8.4 inch screen (640x480). Switches 1, 2, 3, 4, 5, 6, 7, 8 are shown. For 8.4 inch screen, switches 1, 2, 3, 4, 5, 6, 7 are OFF and switch 8 is ON.
Figure 3.1: Toggle Switch Settings for 8.4-inch Screen
Toggle Switch Settings for 8.4 inch screen (640x480)
Switch 1 2 3 4 5 6 7 8
Setting OFF OFF OFF OFF OFF OFF OFF ON

3.2 Cable Connection Diagram

Refer to the detailed cable connection chart below for proper wiring. This diagram illustrates how to connect the CarPlay decoder box to your OEM CD host, power supply, and various inputs like microphone, reverse camera, and USB.

Detailed wiring diagram showing connections for the CarPlay decoder box. It includes connections for MIC IN, GND, 12V Reverse Camera out, 12V ACC out, Back/Reverse Detect, 12V input reverse Detect, Front camera video input, Reverse camera video input, USB Port, WiFi antenna, New LVDS cable, Original LVDS cable, New power cable, and OEM CD host. The diagram shows how the decoder box integrates into the existing car audio system and screen.
Figure 3.2: Comprehensive Cable Connection Chart

3.3 WiFi Antenna and USB-AV Cable Connection

Ensure the WiFi antenna is connected to the decoder box and positioned away from metal obstructions for optimal signal. Connect the USB-AV cable as shown.

Image showing the WiFi antenna connected to the decoder box and the USB-AV cable connected to the decoder box.
Figure 3.3: WiFi Antenna and USB-AV Cable Connections

3.4 Decoder Box Placement

The CarPlay interface decoder box should be installed in an appropriate space near or on the OEM head unit. Ensure it is secured and does not interfere with other vehicle components.

Two images demonstrating possible placement locations for the decoder box: one showing it installed on the OEM head unit, and another showing it placed beside the OEM head unit.
Figure 3.4: Recommended Decoder Box Placement

3.5 Switching Between OEM and CarPlay/Android Auto Systems

After all cables are connected, you can switch between the original car screen and the CarPlay/Android Auto interface by:

  • Long pressing the "Knob Enter" button.
  • Long pressing the top left corner (for Left-Hand Traffic) on the touch screen.
  • Long pressing the top right corner (for Right-Hand Traffic) on the touch screen.
Image showing a car's infotainment screen with an arrow pointing to the 'Knob Enter' button, indicating how to switch between systems.
Figure 3.5: Switching Interface

3.6 Audio Source Connection (AUX)

Plug the provided AUX cable into your OEM AUX input. Then, switch your car's audio source to AUX to hear audio from the CarPlay/Android Auto system.

Image showing an AUX cable and a car's center console with an AUX input highlighted, demonstrating where to plug in the AUX cable.
Figure 3.6: AUX Cable Connection

4. Operating Instructions

4.1 Functional Overview

  • CarPlay / Android Auto: The built-in vehicle machine interaction system allows your iPhone or Android phone to cooperate with the central control knob button. Use voice commands (Siri/Google Assistant) to control phone functions, access information, navigation, and music. Supports both wireless and wired connections.
  • Reversing Video Input: The smart module can decode video signals and supports connection with a rear-view camera for enhanced safety.
  • Mirroring: Supports both wired and wireless screen mirroring functions for compatible iPhone and Android phones, allowing you to display your phone's screen on the car's display.
  • USB Video Playback: Features automatic media playback. Simply insert a U disk directly into the USB port to play video and audio media.

4.2 Wireless CarPlay Connection Method

To connect your iPhone wirelessly to CarPlay:

  1. On the CarPlay interface, navigate to "SmartPhone Setting" and select "Bluetooth".
  2. Check the Bluetooth device name, which should start with "CAR-xxxx".
  3. Turn on your iPhone's Wi-Fi and keep it on.
  4. Go back to your iPhone's Bluetooth settings and select the Bluetooth device name starting with "CAR-xxxx". A pairing request window will pop up; click "Pair" and then "Use CarPlay".
Four screenshots illustrating the steps for wireless CarPlay connection: 1. Selecting Bluetooth in SmartPhone Setting. 2. Identifying the CAR-xxxx Bluetooth device. 3. iPhone Bluetooth settings showing CAR-BT-533d. 4. iPhone pairing request for CarPlay.
Figure 4.1: Wireless CarPlay Connection Steps

4.3 Apple Wireless Screen Mirroring

To mirror your iPhone screen wirelessly:

  1. On the CarPlay interface, navigate to "SmartPhone Setting" and select "AirPlay".
  2. On your iPhone, go to Settings, select "Wireless LAN" (Wi-Fi), and connect to the network named "CAR-WIFI-XXX". The password is 66668888.
  3. After successful Wi-Fi connection, return to your iPhone's main interface, open the shortcut menu page (Control Center), select "Screen Mirroring", and turn it on.
  4. Once "Screen Mirroring" is active on your iPhone, select "AirPlay" from the available devices to complete the wireless screen mirroring.
Four screenshots illustrating the steps for Apple wireless screen mirroring: 1. Selecting AirPlay in SmartPhone Setting. 2. Welcome to AirPlay screen with instructions. 3. iPhone Wi-Fi settings. 4. iPhone Control Center showing Screen Mirroring option.
Figure 4.2: Apple Wireless Screen Mirroring Steps

4.4 Wireless Android Auto Connection Method

To connect your Android phone wirelessly to Android Auto:

  1. On the CarPlay interface, navigate to "SmartPhone Setting" and select "Bluetooth".
  2. Check the Bluetooth device name, which should start with "CAR-xxx".
  3. On your Android phone, go to Bluetooth settings and click on the Bluetooth name beginning with "CAR-xxx". A pairing request will pop up; click "Pairing".
  4. After successful Bluetooth pairing, follow the Android Auto connection process on your phone screen. Ensure the Android Auto app is turned on on your mobile phone, and the system will connect automatically.
Four screenshots illustrating the steps for wireless Android Auto connection: 1. Selecting Bluetooth in SmartPhone Setting. 2. Identifying the CAR-xxxx Bluetooth device. 3. Android Bluetooth settings showing CAR-BT-533d. 4. Android pairing request for CAR-BT-533d.
Figure 4.3: Wireless Android Auto Connection Steps

4.5 Android Wireless Screen Mirroring

To mirror your Android phone screen wirelessly:

  1. Scan the QR code provided in the "Welcome To Auto Link" screen using your Android phone's browser, or manually download and install the Auto Link app.
  2. On the CarPlay interface, navigate to "SmartPhone Setting" and switch the "AutoLink" Wi-Fi option to "ON".
  3. Open the Auto Link software you downloaded on your phone, search for "CAR-WIFI-XXXX" and connect. Then, click the "START NOW" button on the phone prompt box.
  4. The media sound for AutoLink mirroring will need to be connected via Bluetooth.
Four screenshots illustrating the steps for Android wireless screen mirroring: 1. Welcome to Auto Link screen with QR code. 2. SmartPhone Setting with AutoLink ON. 3. AutoLink Pro app interface. 4. Android Bluetooth settings showing CAR-BT-533d.
Figure 4.4: Android Wireless Screen Mirroring Steps

5. Audio Settings

5.1 Call Echo Cancellation

If you experience an echo during phone calls, perform the following echo correction steps:

  1. Navigate to Settings > Audio > AEC Delay.
  2. Click the "Start Auto AEC" button.
  3. Ensure the car is quiet during this process.
  4. Set the volume to a moderate position.
  5. Wait approximately 20 seconds for the estimation to complete.
Three screenshots showing audio settings: 1. Main settings menu with Audio selected. 2. Volume control for Media, Phone, Ringtone, Voice, Other. 3. Call Echo Cancellation screen with 'Start Auto AEC' button and current delay information.
Figure 5.1: Audio Settings and Echo Cancellation

6. Specifications

Feature Detail
Brand Name LEXXSON
Origin Mainland China
Package Length 26 cm
Package Width 19 cm
Package Height 11 cm
Package Weight 0.932 kg

7. Maintenance

To ensure the longevity and optimal performance of your CarPlay/Android Auto Retrofit Kit, please follow these general maintenance guidelines:

  • Keep Dry: Avoid exposing the decoder box and cables to moisture or liquids.
  • Clean Gently: Use a soft, dry cloth to clean the unit. Do not use harsh chemicals or abrasive cleaners.
  • Temperature: Operate and store the device within recommended temperature ranges. Avoid extreme heat or cold.
  • Cable Integrity: Periodically check all cable connections to ensure they are secure and free from damage.

8. Troubleshooting

8.1 Common Issues

  • Echo during calls: Refer to Section 5.1 Call Echo Cancellation for steps to resolve this issue.
  • No audio: Ensure the AUX cable is properly connected and your car's audio source is set to AUX (see Section 3.6).
  • Connection issues: Double-check all cable connections, especially the LVDS cable. For wireless connections, ensure Wi-Fi and Bluetooth are enabled and correctly paired as per operating instructions.

8.2 Contacting Support

Before contacting customer support, please collect the following information to help us assist you more efficiently:

  1. Your order ID.
  2. The exact car model (e.g., Chrysler 300).
  3. The year of the car (e.g., 2012).
  4. The screen size of your car's display.
  5. Details of your toggle switch setup (DIP switch positions).
  6. Pictures of the LVDS cable connection.
  7. The software version of the CarPlay decoder (found in the CarPlay decoder menu under "Setting" > "System Version").

9. User Tips

  • Installation Ease: Users have reported that the kit is very easy to install when following the provided instructions carefully.
  • Compatibility: The kit has been confirmed to work perfectly in Chrysler 300 and Dodge Charger models from 2012.
  • Performance: Many users find the system works wonderfully and highly recommend it for its functionality.

10. Frequently Asked Questions (FAQ)

Q: Will this work in a Lancia Thema 2013 with the Uconnect system?
A: This product is specifically designed and tested for Chrysler 300 Series vehicles from 2011-2016. Compatibility with other models, such as the Lancia Thema 2013 Uconnect system, is not guaranteed and should be verified by the user or a professional installer before purchase.

11. Additional Resources

For a detailed user manual and further technical documentation, please refer to the PDF document available at: User Manual (PDF)

© 2024 LEXXSON. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.