1. Introduction
This manual provides detailed instructions for the installation, operation, and troubleshooting of your Wireless CarPlay Android Auto Retrofit Kit Decoder Box. This device allows you to integrate Apple CarPlay and Android Auto functionalities into your vehicle's existing infotainment system, enhancing your driving experience with navigation, music, and communication features.
2. Functional Overview
- CarPlay / Android Auto: Seamless integration with your smartphone for navigation, music, calls, and messages via voice control (Siri/Google Assistant). Supports both wireless and wired connections.
- Reversing Video Input: The smart module can decode video signals and supports input from aftermarket rear-view cameras.
- Mirroring: Supports wired and wireless screen mirroring for both iPhone and Android phones.
- USB Video Playback: Automatic media playback function; directly insert a USB disk to play video and audio media.
3. Kit Contents
Please verify that all items listed below are included in your package:

Figure 3.1: Included components of the retrofit kit.
- CarPlay Decoder Box
- Power Cable Harness
- LVDS Cable
- WiFi Antenna
- USB-AV Cable
- Microphone (Mic Cable)
- AUX Cable
4. Setup and Installation
4.1. Toggle Switch (DIP) Setup
The decoder box features DIP switches that must be configured according to your car's screen size.
- Locate the DIP Switches: The toggle switches are located on the side of the CarPlay decoder box.

Figure 4.1: Location of the toggle (DIP) switches on the decoder box.
- Set Switches for 8.4-inch Screen (640x480): Configure the switches as shown in the diagram below. If your screen size is different, please refer to the full PDF manual for specific settings.

Figure 4.2: DIP switch settings for an 8.4-inch screen (640x480 resolution).
4.2. Cable Connection Chart
Follow the detailed wiring diagram carefully to connect all cables between the decoder box, your vehicle's OEM head unit, and other accessories.

Figure 4.3: Comprehensive cable connection diagram for the retrofit kit.
4.3. WiFi Antenna and USB-AV Cable Connection
Connect the WiFi antenna and USB-AV cable to their respective ports on the decoder box.

Figure 4.4: Connection points for the WiFi antenna and USB-AV cable.
4.4. Decoder Box Installation Location
Install the CarPlay interface decoder box in an appropriate space near or on the OEM head unit, ensuring it does not obstruct any vehicle functions or components.

Figure 4.5: Examples of suitable installation locations for the decoder box.
4.5. Audio Source Connection
Plug the provided AUX cable into your vehicle's OEM AUX input and switch your car's audio source to AUX to enable audio output from the CarPlay/Android Auto system.

Figure 4.6: Connecting the AUX cable and selecting AUX as the audio source.
5. Operating Instructions
5.1. Switching Between Original Screen and CarPlay Interface
After all cables are connected, you can switch between your vehicle's original screen and the CarPlay/Android Auto interface by:
- Long pressing the