SUITU Wireless Charging Phone Holder Mount

Contents

SUITU Wireless Charging Phone Holder for Mercedes Benz Smart Car

Model: Wireless Charging Phone Holder Mount

Compatible with Mercedes Benz Smart Car Models 451 & 453

Introduction

Thank you for purchasing the SUITU Wireless Charging Phone Holder. This product is designed to provide a convenient and secure mounting solution for your smartphone in your Mercedes Benz Smart Car, while also offering fast 10W Qi wireless charging capabilities. Please read this manual carefully before installation and use to ensure optimal performance and safety.

Safety Information

  • Do not attempt to disassemble or modify the product.
  • Keep the product away from water, moisture, and extreme temperatures.
  • Ensure the phone holder is securely mounted before placing your device.
  • Avoid obstructing your view of the road or vehicle controls during installation.
  • Do not operate your phone or adjust the holder while driving.

Package Contents

Verify that all items are present in your package:

  • Wireless Charging Phone Holder Unit
  • Car Mount Base (specific to Smart 451/453 model variant)
  • USB Charging Cable
  • Cable Management Clips (if included)
Components of the SUITU wireless charger and phone holder kit
Figure 1: Included components of the wireless charging phone holder kit.

Setup and Installation

The installation process may vary slightly depending on your specific Smart Car model (451 or 453) and dashboard configuration (e.g., navigation-side, radio type, navigation-mid). The product is designed for straightforward installation without professional tools.

  1. Identify Mount Type: Determine the correct mount base for your Smart Car model. For example, the '453 navigation-side screen type' mount is specifically designed for that installation position.
  2. Attach Mount Base: Securely attach the appropriate car mount base to your vehicle's dashboard or designated area. Ensure it is firmly in place and does not wobble.
  3. Connect Holder to Mount: Connect the wireless charging phone holder unit to the installed mount base. It should click or screw into place securely.
  4. Power Connection: Connect the provided USB charging cable to the wireless charging holder. Route the cable neatly using the included cable management clips (if applicable) to a suitable USB power source in your car (e.g., USB port, car charger adapter).
  5. Test Functionality: Once installed, ensure the holder is stable and the wireless charging function activates when a compatible phone is placed in it.
Specific mount type for Smart 453 navigation-side screen
Figure 2: Example of a specific mount type for Smart 453 navigation-side screen installation.
SUITU wireless charger and phone holder installed in a Mercedes Benz Smart car
Figure 3: The phone holder installed in a Smart car dashboard.

For a visual guide on installation and operation, please refer to the demonstration video below:

Video 1: Installation and operation demonstration of the SUITU Wireless Charging Phone Holder.

Operating Instructions

  1. Power On: Ensure the holder is connected to a power source. The indicator light (if present) should illuminate.
  2. Placing Your Phone: The holder features an automatic stretching mechanism. Gently press the right button on the side of the holder to expand the arms. Place your Qi-compatible smartphone into the holder. The arms will automatically close to secure your phone and initiate wireless charging.
  3. Wireless Charging: Once your phone is securely placed, wireless charging will begin automatically if your phone supports the Qi standard. A charging icon should appear on your phone's screen.
  4. Removing Your Phone: To remove your phone, press the right button again to release the arms, then carefully lift your phone out.
  5. Orientation: The holder allows for both vertical and horizontal phone orientation, depending on your preference and navigation needs.
Close-up of the phone holder showing the automatic release button
Figure 4: Press the right button to automatically stretch the phone holder arms.
Hand placing a smartphone onto the wireless charging phone holder
Figure 5: Placing a phone into the holder for secure grip and wireless charging.
Smartphone displaying navigation while mounted in the holder
Figure 6: Phone securely held in the mount, suitable for navigation.

Maintenance

  • Clean the surface of the holder with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Ensure the charging contacts on the holder and your phone are clean and free of debris for efficient wireless charging.
  • Regularly check the security of the mount base and holder unit.

Troubleshooting

Phone not charging wirelessly:
Ensure your phone is Qi-compatible. Check if the phone is properly aligned with the charging coil in the holder. Remove any thick phone cases that might interfere with wireless charging. Verify the USB cable is securely connected to both the holder and the power source.
Phone holder arms open unexpectedly:
This could be due to a loose connection or a power fluctuation. Ensure the USB cable is firmly connected. If the issue persists, try using a different USB port or car charger adapter. If the problem continues, contact customer service.
Holder is unstable or loose:
Re-check the installation of the mount base to your dashboard. Ensure all screws or clips are tightened. If the issue is with the connection between the holder unit and the mount base, ensure it is fully engaged.

Specifications

Feature Detail
Product Type Wireless Charger
Brand Name SUITU
Origin Mainland China
Wireless Charging Output 10W (Fast Qi Charging)
Package Length 16 cm
Package Width 15 cm
Package Height 6 cm
Package Weight 0.236 kg

User Tips

  • Model Compatibility: Ensure you select the correct mount type for your specific Mercedes Benz Smart Car model (e.g., 451, 453 navigation-side, 453 radio type, 453 navigation-mid) to guarantee a perfect fit and stable installation.
  • Secure Fit: Users have reported that the product fits perfectly and is fully functional when the correct model is chosen and installed properly.
  • Cable Management: Utilize the cable management clips to keep the charging cable tidy and prevent it from interfering with driving controls or aesthetics.

Warranty and Support

For detailed warranty information and customer support, please refer to the official user manual PDF available for download. If you have any questions or require assistance, please contact our customer service department.

A comprehensive user manual in PDF format is available for further details: View User Manual (PDF)

© 2024 SUITU. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.