kebidumei T89

Contents

Kebidumei Bluetooth 6.0 Audio Receiver User Manual

Model: T89

1. Introduction

Thank you for choosing the Kebidumei Bluetooth 6.0 Audio Receiver. This device allows you to wirelessly stream audio from your Bluetooth-enabled devices to your home stereo system, car audio, or wired headphones. It also supports audio playback directly from a USB flash drive and features a built-in microphone for hands-free calling.

Kebidumei Bluetooth 6.0 Audio Receiver with features listed

Figure 1: Kebidumei Bluetooth 6.0 Audio Receiver highlighting key features like CD quality sound, built-in microphone, and USB playback.

2. Package Contents

Please check the package for the following items:

  • 1x Bluetooth 6.0 Audio Receiver (Model T89)
  • 1x 3.5mm AUX Audio Cable
  • 1x Type-C Power Cable
  • 1x User Manual (this document)
Package contents of the Bluetooth receiver

Figure 2: Contents of the product package, including the receiver, cables, and user manual.

3. Device Layout

Familiarize yourself with the ports and buttons on your audio receiver:

Diagram of the Bluetooth audio receiver's interfaces and buttons

Figure 3: Interface diagram of the Bluetooth audio receiver, showing all ports and controls.

  1. Power Button: On/Off switch.
  2. Answer Call Button: Multifunction button for play/pause, answer/end calls, redial.
  3. Previous Track / Volume Down: Short press for previous track, long press to decrease volume.
  4. Next Track / Volume Up: Short press for next track, long press to increase volume.
  5. Mode Switch Button (M): Switches between Bluetooth and U-Disk playback modes.
  6. USB Port: For connecting a USB flash drive for audio playback.
  7. Type-C Port (DC/5V): Power input for the device.
  8. AUX Interface (3.5mm): Audio output to speakers or headphones.
  9. RCA Connectors (L/R): Audio output to speakers or amplifiers.
  10. Microphone: For hands-free calling.
  11. Receiving Antenna (BT): For Bluetooth signal reception.

4. Setup Instructions

4.1. Connecting to Power

Connect the supplied Type-C power cable to the DC/5V port on the receiver and the other end to a USB power adapter (not included) or a USB port on your device (e.g., car USB port, computer).

4.2. Connecting to Audio System (Receive Mode - RX)

The receiver can connect to various audio systems:

  1. Using 3.5mm AUX Cable: Connect one end of the 3.5mm AUX cable to the AUX interface on the receiver and the other end to the AUX input of your speaker, amplifier, or wired headphones.
  2. Using RCA Cables (not included with "Without RCA Cable" variant): Connect RCA cables (red to R, white to L) to the RCA connectors on the receiver and the corresponding RCA input ports on your amplifier or speaker system.
RCA interface connection example

Figure 4: Example of connecting the receiver to an audio system using RCA cables.

Receive Mode (RX) diagram showing various devices

Figure 5: Diagram illustrating the receiver in Receive Mode (RX), connecting to various devices like mobile phones, iPads, laptops, old amplifiers, wired headphones, and car audio systems.

4.3. Bluetooth Pairing

  1. Ensure the receiver is powered on and connected to your audio system.
  2. On your mobile phone, tablet, or other Bluetooth-enabled device, go to the Bluetooth settings.
  3. Search for available devices and select "T89" from the list.
  4. Once successfully paired, the device will indicate a connection, and you can start streaming audio wirelessly.
Bluetooth receiver connected to an old speaker system, streaming from a smartphone

Figure 6: Upgrading an old speaker system to Bluetooth capability using the receiver.

5. Operating Instructions

5.1. Power On/Off

  • Press the Power Button to turn the device on or off.

5.2. Bluetooth Mode Operations

  • Play/Pause: Short press the Answer Call Button (multifunction key).
  • Next Track: Short press the Next Track / Volume Up button.
  • Previous Track: Short press the Previous Track / Volume Down button.
  • Volume Up: Long press the Next Track / Volume Up button.
  • Volume Down: Long press the Previous Track / Volume Down button.
  • Answer/End Call: Short press the Answer Call Button when a call comes in.
  • Redial Last Number: Double-click the Answer Call Button.
Bluetooth receiver in a car console, user on a phone call

Figure 7: Using the receiver for hands-free calling in a car.

5.3. U-Disk Playback Mode Operations

  • Insert USB Drive: Insert a USB flash drive containing audio files into the USB Port. The device will automatically switch to U-Disk mode and begin playback.
  • Next Track: Short press the Next Track / Volume Up button.
  • Previous Track: Short press the Previous Track / Volume Down button.
  • Volume Control: Volume can be adjusted using the Next Track / Volume Up and Previous Track / Volume Down buttons (long press).
Close-up of the USB port on the receiver with a USB flash drive

Figure 8: The external USB drive function for direct audio playback.

5.4. Switching Modes

  • To switch between Bluetooth mode and U-Disk playback mode, short press the Mode Switch Button (M).

6. Maintenance

  • Keep the device dry. Avoid exposure to moisture, rain, or humidity.
  • Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. Use a soft, dry cloth.
  • Avoid extreme temperatures. Do not store the device in very hot or very cold environments.
  • Handle with care. Do not drop, knock, or shake the device.

7. Troubleshooting

ProblemPossible CauseSolution
Device does not power on.No power supply or faulty cable.Ensure the Type-C power cable is securely connected to a working USB power source. Try a different cable or power adapter.
Cannot pair via Bluetooth.Device not in pairing mode, out of range, or incorrect device selected.Ensure the receiver is powered on. Place the receiver and your Bluetooth device closer. Make sure "T89" is selected in your device's Bluetooth settings.
No sound after connecting.Volume too low, incorrect input selected on audio system, or loose cables.Increase volume on both the receiver and your connected audio system/phone. Check that your audio system is set to the correct input (AUX/RCA). Ensure all audio cables are securely connected.
USB playback not working.Incompatible USB format/files, or device not in U-Disk mode.Ensure the USB flash drive is formatted to FAT32 and contains compatible audio files (e.g., MP3). Press the 'M' button to switch to U-Disk mode.

8. Specifications

FeatureDetail
Brandkebidumei
Model NumberT89 (Bluetooth 6.0 Audio Adapter)
Wireless TypeBluetooth 6.0
Interfaces3.5mm AUX, USB-A, Type-C (Power), RCA (L/R)
Audio OutputStereo (Double Sound Track)
ContentAUDIO
MicrophoneBuilt-in
Memory Card SupportNo
Apt-x SupportNo
AAC SupportNo
Dimensions (approx.)60mm x 70mm
OriginMainland China

9. User Tips

  • Volume Adjustment: For optimal sound, adjust the volume on both your transmitting device (phone/tablet) and your connected audio system (amplifier/speaker).
  • Modernize Old Systems: This adapter is excellent for upgrading older hi-fi systems, allowing them to stream music wirelessly from modern devices.
  • Car Use: The device works perfectly when connected to a car's AUX input, enabling Bluetooth audio and hands-free calls in your vehicle.
  • Sound Quality: Users report very good sound quality with no noticeable noise, providing a clean audio experience.
  • Range: The device offers a surprisingly long Bluetooth range, allowing flexibility in device placement.
  • Ease of Use: The receiver is generally easy to connect and operate, making it user-friendly for various applications.

10. Warranty and Support

For warranty information and technical support, please refer to the seller or manufacturer's official channels. Keep your purchase receipt for any warranty claims.

A PDF version of this user manual may be available for download from the product page or seller's website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.