1. Introduction
This manual provides detailed instructions for the installation, setup, and operation of your EzoneTronics Wireless CarPlay Android Auto Interface for Audi A6 and A7 models manufactured between 2012 and 2018. This system integrates advanced smartphone connectivity features into your vehicle's existing infotainment system, enhancing your driving experience with navigation, communication, and entertainment.

2. Functional Statement
- CarPlay / Android Auto: Integrates your iPhone or Android device with the vehicle's MMI system. Supports voice commands, central control knob, and Siri/Google Assistant for phone calls, information, navigation, and music. Both wireless and wired connections are supported.
- Reversing Video Input: The smart module can decode video signals and supports input from the factory original reverse camera, parking radar, aftermarket reverse cameras, and 360-degree cameras.
- Mirroring: Supports both wired and wireless screen mirroring functions for iPhone and Android phones.
- USB Video Playback: Automatic media playback function allows direct insertion of a USB disk to play video and audio media.
3. Package Contents
Please check the package for the following items:

- CarPlay Decoder Box
- Power Cable Harness
- LVDS Cable
- WiFi Antenna
- USB-AV Cable
4. Setup and Installation
4.1. Pre-Installation Check
Before proceeding with installation, ensure the product is compatible with your specific Audi A6 or A7 model (2012-2018) and its MMI system. Verify that all included cables match your vehicle's connectors to avoid fitment issues.
4.2. Toggle Switch (DIP) Setup
The toggle (DIP) switches are located on the CarPlay decoder box. These switches must be set according to your car's screen size for proper display functionality.

Set the toggle switch settings as follows:
| Screen Size | DIP Switch Settings (1-8) |
|---|---|
| 5.8 / 6.5 inch (400x240) | 1: ON, 2: OFF, 3: OFF, 4: OFF, 5: OFF, 6: OFF, 7: OFF, 8: OFF |
| 7 / 8 inch (800x480) | 1: OFF, 2: ON, 3: OFF, 4: OFF, 5: OFF, 6: OFF, 7: OFF, 8: OFF |
| 8.3 inch (1024x480) | 1: OFF, 2: OFF, 3: ON, 4: OFF, 5: OFF, 6: OFF, 7: OFF, 8: OFF |
4.3. Cable Connection Chart
Follow the detailed wiring diagram below for connecting all components. Ensure all connections are secure before powering on the system.

4.4. WiFi Antenna and USB-AV Cable Connection
Connect the WiFi antenna to the designated port on the decoder box. Connect the USB-AV cable to its respective port.

4.5. Decoder Box Placement
The CarPlay interface decoder box should be installed in an appropriate space near or on the OEM head unit. Ensure it is secured and does not interfere with other vehicle components.

5. Operating Instructions
5.1. Switching Between MMI and CarPlay
After all cables are connected, you can switch between the original MMI (MIB) interface and the CarPlay/Android Auto interface by long-pressing the