Introduction
Thank you for choosing the ECHTpower Wireless Game Controller. This manual provides detailed instructions for setting up, operating, and maintaining your controller. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.
This controller features Hall effect joysticks, dual programmable back buttons, a magnetic charging dock, and multi-platform compatibility, offering a superior gaming experience.
Front view of the ECHTpower Wireless Game Controller and its USB receiver.
Supported Platforms
- Windows 7 and above
- Nintendo Switch (NS) 3.0 and above
- Android 8.0 and above
- iOS 18 and above
The controller is compatible with various platforms including PC, Android, iOS, Switch, and Tesla.
Package Contents
Please check the package for the following items:
- Game Controller x1
- Controller Charging Dock x1
- Controller Receiver x1
- Type-C Charging Cable x1
- User Manual x1
Product Specifications
| Product Model | 1133 |
| Dimensions | 110mm x 158mm x 75mm |
| Weight | 380g |
| Charging Power | 5V/0.5A Max |
| Charging Time | 3 Hours |
| Battery Life | 6-8 Hours |
| Battery Capacity | 800mAh |
| Trigger Button Type | Hall-Linear |
Controller Button Map
Familiarize yourself with the layout of your controller:
The controller magnetically attaches to its charging dock for instant charging.
Front View:
- Home button
- View Button/- Button
- Menu Button/+ Button
- ABXY Buttons (A, B, X, Y)
- Left Joystick
- D-pad
- M button
- Channel Light
- Right Joystick
Top View:
- RB button (Right Bumper)
- RT button (Right Trigger)
- LB button (Left Bumper)
- LT button (Left Trigger)
- Type-C Charging Port
Back View:
- Trigger Switch
- Toggle Switch
- M2 button (Programmable Back Button)
- M1 button (Programmable Back Button)
- Reset Hole
- Charging Contact Point
Dual programmable back buttons (M1/M2) for macros and remapping. Supported buttons for programming include ABXY, D-pad, LB, RB, LT, RT, L3, R3.
The controller features both short-travel Micro Triggers (2mm) and long-travel Hall Triggers (9mm).
Setup
First-Time Use
Before using the controller for the first time, please charge it fully to activate the battery.
Charging the Controller
Place the controller onto the charging dock. The dock connects via a Type-C port and has indicator lights. Alternatively, connect the Type-C cable directly to the controller.
Bluetooth Connection to Nintendo Switch
- With the controller powered off, toggle the switch to the NS position.
- Hold the Home button for 3 seconds until the LED light flashes white.
- Turn on your Switch console, navigate to the pairing interface (Controllers > Change Grip/Order), and wait for the Bluetooth pairing to complete.
Wired Connection to Nintendo Switch
- Connect the controller to the Switch console via the USB Type-C cable.
- Press any button on the controller to wake it up. It is now ready for use.
- When the cable is disconnected, the controller automatically switches to Bluetooth connection with the Switch console.
Connecting the Receiver to PC (Wireless)
- With the controller turned off, flip the switch to the receiver position (usually indicated by a dongle icon).
- Press and hold the Home button for 3 seconds until the LED light flashes red.
- Plug the receiver into your PC's USB port. Press and hold the pairing button on the receiver for 3 seconds until its LED light flashes.
- Wait for pairing to complete. Once successful, the LED indicator on the receiver will remain lit.
- Alternative: You can plug the receiver into the controller's charging base, connect the base to the PC via the data cable, and follow the above pairing steps.
The controller supports a 1000 Hz polling rate for both wired and wireless PC connections.
Wired Connection to PC
- Use a data cable to connect the controller to your computer.
- Press the Home button on the controller to start up and use it normally.
Bluetooth Connection (PC/iOS/Android Phone/TV)
- When the controller is turned off, switch the power switch to BT mode.
- Press and hold the Home button for 3 seconds until the LED light flashes blue (entering pairing mode).
- Open your device's Bluetooth settings, search for, and connect to "Xbox Wireless Controller".
Controller PC Mode Switch
After connecting to PC, the controller defaults to Xinput mode (device name: Xbox 360 controller, LED: red steady light).
- Xinput to Dinput: In Xinput mode, press and hold the View button (-) and Menu button (+) simultaneously for 3 seconds. (Device name: Gamepad, LED: red and blue).
- Dinput to NS: In Dinput mode, press and hold the View button (-) and Menu button (+) simultaneously for 3 seconds. (Device name: Pro Controller, LED: blue).
- NS to Xinput: In NS mode, press and hold the View button (-) and Menu button (+) simultaneously for 3 seconds.
Note: Mode switching is only available when connected via a wired connection or receiver. It is not supported when connected via Bluetooth.
Operating Instructions
Rapid Fire Function (Turbo)
Supported buttons: ABXY, LB/RB, LT/RT.
- Manual Rapid Fire: Hold down the M button and press the desired button once.
- Automatic Rapid Fire: After setting manual rapid fire, hold down the M button again and press the same button once.
- Disable Burst Fire: After setting burst fire, hold down the M button and press the same button once.
- Clear All Burst Fire: Hold down the M button for 5 seconds to disable rapid fire for all buttons.
Back Button Programming (M1/M2)
Supported buttons for programming: ABXY, D-pad, LB, RB, LT, RT, L3, R3. Up to 16 buttons can be recorded.
- Setup Method: After connecting, hold down M1 or M2, then press the M button for 2 seconds. The status indicator light will flash slowly. Release all buttons. Input the action buttons in sequence. After recording, press M1 or M2 again to finish. The controller will vibrate once.
- Clear Method: Hold down M1 or M2, then press the M button for 2 seconds. The status indicator light will flash slowly. Press M1 or M2 again to clear the desired back button.
Vibration Intensity Adjustment
The motor vibration has four levels: 100%, 60%, 30%, and 0%. Factory default is 60%.
After connecting, press and hold the M button, then push the left joystick up and down to adjust the vibration intensity.
RGB Light Mode Switching
There are four RGB light modes: asynchronous different colors breathing, synchronous same colors breathing, synchronous different colors breathing, and mixed colors.
Press the M button + R3 button once to switch the light mode.
RGB Light Brightness Adjustment
There are three levels of RGB light brightness: 100%, 60%, and 30%. Factory default is 100%.
- Decrease Brightness: Hold down the M button and tilt the left joystick to the left.
- Increase Brightness: Hold down the M button and tilt the left joystick to the right.
- Turn RGB On/Off: Hold down the M button + R3 button for 5 seconds.
Joystick and Trigger Calibration
- Place the controller flat on a table and ensure it is turned off.
- Press L3 and R1 buttons simultaneously. Wait for the controller's LED to flash red and green alternately to enter calibration mode.
- Press the A button; the blue LED will illuminate.
- Rotate the left and right joysticks three times each, and press the long-travel trigger all the way down three times.
- Press the A button again; the green LED will illuminate, indicating calibration is complete. The controller will automatically power off.
Maintenance
Controller Reset
If the controller malfunctions or freezes, simply charge the controller to reset it.
Troubleshooting
- Controller not turning on: Ensure the controller is fully charged.
- Connection issues: Double-check the pairing steps for your specific platform. Ensure the controller is in the correct mode (NS, BT, Receiver).
- Buttons unresponsive: Try resetting the controller by charging it. If issues persist, perform joystick and trigger calibration.
- Drifting joysticks: Perform joystick and trigger calibration. If the issue continues, consider using the KeyLinker app for dead zone adjustments.
- Rapid fire not working: Ensure you are pressing the M button correctly in combination with the desired action button.
Other Functions & Support
For advanced functions such as firmware updates, key setting changes, and joystick dead zone adjustments, please download the "KeyLinker" application to configure settings.
For further assistance, you may refer to the official PDF user manual: View User Manual (PDF)
Contact Information
- Tel: 0755-21010839
- Email: service@echtpower.com
- Web: www.echtpower.com
- Manufacturer: Shenzhen Mike Morgen Technology Co., Ltd
- Address: Room 302, 3rd Floor, Building 5, Zone C, Jinxiu Huacheng Science and Technology Park, No. 36 Xiangjiaotang Second Road, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen
Declaration of Conformity
The product Model 1133 conforms to EC standards for radio interference and relevant directives. Full text of the EU Declaration of Compliance can be found on www.echtpower.com.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Precautions
- Do not expose to liquid.
- Do not disassemble the device.
- Avoid dropping the device.
- Avoid extremely high or low temperatures.