QRXQ RXP-XY-107

Contents

QRXQ RXP-XY-107 Dual Y-Axis CNC Gantry Structure Assembly Automation System

Model: RXP-XY-107 | Brand: QRXQ

1. Introduction

The QRXQ RXP-XY-107 is a Dual Y-Axis CNC Gantry Structure Assembly Automation System, designed for precise linear motion and accurate positioning. This integrated precision transmission unit combines guide rails, screws/belts, motors, and couplings. It is suitable for various industrial applications including 3D drawing, printing, and laser cutting machines.

QRXQ RXP-XY-107 Dual Y-Axis CNC Gantry Structure Assembly Automation System
Figure 1: RXP-XY-107 Dual Y-Axis CNC Gantry System
Video 1: Product Overview and Features

2. Safety Instructions

  • Bolt Tightening: All bolts shall be tightened to the specified torque to prevent loosening. Re-inspection is recommended, especially after the equipment has been in operation for a period of time.
  • Clean Environment: The installation should be carried out in a clean environment as much as possible to prevent dust from entering the transmission system and causing unnecessary wear.
  • Power Safety: Do not power on the equipment before installation is complete. Ensure all guards are properly installed before commissioning and operation.

3. Components Overview

The RXP-XY-107 system consists of several key components:

Modular design for fast XYZ multi-axis system setup
Figure 2: Modular Design and Precision Transmission Components
  • Linear Modules: X-axis, Y-axis, and Z-axis linear modules for precise movement.
  • Couplings: Independently developed coupling devices for connecting shafts.
  • Synchronization Rods: Used in gantry setups to ensure synchronized movement of Y-axes.
  • Connecting Plates: Horizontal, L-shaped, and triangular plates for various assembly configurations.
  • Cable Drag Chains: For organized cable management, with upper and lower fixing plates and slots.
  • Motors: NEMA23 stepper motors (e.g., RX57/56, YK57HB56, 57CM13) with 1.26N.m torque.
  • Sensors: EE-SX674 (NPN/PNP) limit sensors.
  • Fixed Foundation: RXP45DJ.
General product shot of linear modules and components
Figure 3: RXP-XY-107 Components

4. Setup and Installation

This section details the assembly procedures for common configurations. For specific 3D models and further construction methods, please contact customer service.

4.1. Cross Construction

  1. Step 1: Fix the horizontal connecting plate to the X-axis linear module.
  2. Step 2: Fix the horizontal connecting plate to the Y-axis linear module.
  3. Step 3: Install the drag chain slot. Connect the lower fixing plate of the drag chain to the drag chain slot, then install the lower fixing plate on the Y-axis linear module. (If the drag chain slot is not included in the order, this step can be ignored.)
  4. Step 4: Install the upper fixing plate of the drag chain onto the horizontal connecting plate. (If the drag chain slot was not ordered, this step can be omitted.)
Cross Construction Diagram
Figure 4: Cross Construction Assembly

4.2. Horizontal Gantry Construction

  1. Step 1: Connect the synchronizing shaft and the coupling. Insert the end face of the synchronizing shaft into the coupling, and then tighten the bolts.
  2. Step 2: Connect the two Y-axes with the synchronizing shaft assembly to form a synchronous operation module.
  3. Step 3: Mount the X-axis linear module assembled in the previous step onto the Y-axis synchronous operation module using horizontal connecting plates.
  4. Step 4: Install the drag chain slot. Connect the lower fixing plate of the drag chain to the drag chain slot, then install the lower fixing plate on the Y-axis linear module. (If the drag chain slot is not included in the order, this step can be ignored.)
  5. Step 5: Install the upper fixing plate of the drag chain onto the horizontal connecting plate. (If the drag chain slot was not ordered, this step can be omitted.)
Horizontal Gantry Construction Diagram
Figure 5: Horizontal Gantry Construction Assembly

4.3. T-type Construction

  1. Step 1: Connect the triangular plate fittings together with bolts.
  2. Step 2: Install the triangular plate assembly onto the Y-axis linear module.
  3. Step 3: Install the Z-axis linear module onto the Y-axis linear module via the triangular plate assembly.
  4. Step 4: Install the drag chain trough onto the Y-axis linear module by referring to the drag chain trough installation method for the cross gantry setup.

4.4. H-type Gantry Construction

  1. Step 1: Connect the synchronizing shaft and the coupling. Insert the end face of the synchronizing shaft into the coupling, and then tighten the bolts.
  2. Step 2: Connect the two Y-axis modules with the synchronizing shaft assembly to form a synchronous operation module. The installation method of the X-axis synchronous operation module is the same as that of the Y-axis synchronous operation module.
  3. Step 3: Install the L-shaped connecting plates onto the synchronous operation module.
  4. Step 4: Install the X-axis linear module onto the L-shaped connecting plates.
  5. Step 5: Refer to the installation method of the drag chain trough used in the horizontal gantry setup, and install the drag chain onto the module.
  6. Step 6: Install the Z-axis linear module onto the X-axis linear module by referring to the cross gantry installation method.
  7. Step 7: Install the X-axis drag chain trough onto the X-axis linear module by referring to the Y-axis drag chain trough installation method.
Various Multi-Axis Module Building Programs
Figure 6: Examples of Multi-Axis Module Configurations

5. Operation

The RXP-XY-107 system is designed for ultra-long stroke and high-speed operation with micron-level stability. The repeated positioning accuracy can reach 0.05mm.

  • Recommended Operating Speed: 2m/s
  • Suggested Speed (Stepping Motor): 0-700 mm/s
  • Suggested Speed (Servo Motor): 0-1500 mm/s
Zero vibration, low noise, high-speed sliding
Figure 7: High-Speed, Low-Noise Operation

The system supports various control options:

Diagram showing how to connect components
Figure 8: System Control Connections
  • Option 1: Drives, Foundation, Limit Switch (Suitable for users with a control system, microcontrollers, or PLCs).
  • Option 2: Integrated Control Chassis, Foundation, Limit Switch (Integrated control chassis, capable of power-off automatic saving and automatic round-trip operation. Can set distance/speed/delay/number of cycles).
  • Option 3: Programmable Touch Screen Chassis, Foundation, Limit Switch (Programmable touch screen chassis, no wiring required, ready to use at hand).
Control System Options
Figure 9: Control System Options

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your RXP-XY-107 system.

  • Lubrication: The system incorporates self-lubricating oil technology for quietness and durability. Periodically check and ensure proper lubrication.
  • Cleaning: Keep the operating environment clean to prevent dust and debris from affecting the transmission system.
  • Fastener Checks: Regularly inspect all bolts and fasteners for tightness. Re-tighten to the specified torque if necessary, especially after initial use.
  • Belt Inspection: Check the upgraded quality belts for any signs of wear or damage. The transparent belt with built-in steel wire structure offers good abrasion resistance and high tensile strength.
Detailed features including self-lubricating oil
Figure 10: Key Features for Durability and Maintenance
Waterproof Timing Belt Module Material
Figure 11: Waterproof Timing Belt Module Material (Aluminum Alloy + Stainless Steel 316)

7. Troubleshooting

If you encounter any issues with your RXP-XY-107 system, please consider the following general advice:

  • Check Connections: Ensure all electrical and mechanical connections are secure and correctly installed.
  • Power Supply: Verify that the power supply (DC24V) is stable and correctly connected.
  • Sensor Functionality: Confirm that limit sensors (EE-SX674 NPN/PNP) are properly aligned and functioning.
  • Mechanical Obstructions: Inspect for any physical obstructions that might impede the linear modules' movement.
  • Software/Control System: If using a control system, ensure its configuration matches the system requirements.

For complex issues or further assistance, please contact QRXQ customer service.

8. Specifications

General Specifications
Attribute Value
Brand NameQRXQ
Model NumberRXP-XY-107
Guide Width or Diameter45MM
OriginMainland China
CertificationCE, FCC, RoHS
Customized Itinerary (mm)100-5500
Repeat Positioning Accuracy (mm)0.05
Lead (mm)75/36
Suggested Speed (Stepping Motor)0-700/S
Suggested Speed (Servo Motor)0-1500/S
Horizontal Loads15KG
Vertical Loads5KG
Profile Body Width (mm)45
Coupler12*8
SensorEE-SX674(NPN/PNP)
Fixed FoundationRXP45DJ

Matching Stepper Motor List

Branding Motor Brands Motor Torque Supply Voltage Stepper Motor Model Drive Model
QRXQQ1.26N.mDC24VRX57/562D45A
YAKOTECY1.26N.mDC24VYK57HB562D45A
LeadshineL1.26N.mDC24V57CM13DM542J
Matching Stepper Motor List
Figure 12: Matching Stepper Motor List

9. User Tips

  • For optimal performance, ensure the system is installed on a stable and level surface.
  • Regularly check for any loose components or unusual noises during operation.
  • When customizing, utilize the provided 3D models for compatibility with multiple software applications.
  • Consider the various motor mounting options (RU, RB, RD) to best suit your specific application and space constraints.

10. Support and Documentation

For detailed structural compositions and installation procedures, you can refer to the official user manual:

View User Manual (PDF)

For further inquiries or technical support, please contact QRXQ customer service.

QRXQ Factory and Quality Control
Figure 13: QRXQ Factory and Quality Control
Multiple Authoritative Certificates
Figure 14: Product Certifications (CE, FCC, RoHS)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.