Jonsbo X400

Contents

JONSBO X400 ATX Case User Manual

Model: X400 Series

Brand: Jonsbo

1. Warnings & Safety Information

  • Do not use in humid environments.
  • Do not disassemble internal components without authorization.
  • Ensure adequate ventilation to prevent overheating.
  • Avoid high-temperature and high-humidity environments.
  • Do not forcibly compress or deform the case.
  • Prevent liquids from entering the interior.

2. Setup Instructions

This section guides you through the initial setup and component installation for your JONSBO X400 ATX Case.

2.1. Case Overview and Preparation

The JONSBO X400 series features a unique frame and back-connect design, offering a spacious interior and optimized airflow. The case supports various motherboard form factors and extensive cooling solutions.

Jonsbo X400 ATX Case in Gray and White
Figure 2.1: JONSBO X400 ATX Case (Gray and White models shown).
Top and Bottom views of the Jonsbo X400 ATX Case
Figure 2.2: Top and bottom views of the X400 case, illustrating ventilation and footrest design.
  1. Placement: Place the computer case on a stable, level surface to ensure proper balance and airflow.
  2. Accessing the Interior: The top cover, side panels, and base plate are equipped with tool-free snap fasteners for easy opening and closing, enhancing convenience for installation and maintenance.
  3. Double-sided plate anti-fall hovering design and push-button opening method
    Figure 2.3: Illustration of the tool-free side panel opening mechanism.

2.2. Component Installation

  1. Motherboard Installation: The X400 supports MINI-ITX, MICRO-ATX, and ATX motherboards, including back-plug motherboards. Install your motherboard securely into the designated standoffs.
    Motherboard compatibility diagram for Jonsbo X400 ATX Case
    Figure 2.4: Motherboard compatibility and mounting points.
  2. Power Supply Unit (PSU) Installation: The case supports ATX PS2 power supplies with a maximum length of 180mm. Install the PSU in its designated compartment.
    ATX power supply support in Jonsbo X400 ATX Case
    Figure 2.5: Power supply installation area.
  3. Graphics Card (GPU) Installation: The case supports GPUs up to 427mm in length. The 2nd slot graphics card installation position occupies 133mm of the inner space of the motherboard.
    Graphics card installation position in Jonsbo X400 ATX Case
    Figure 2.6: Graphics card length and slot clearance.

    Vertical GPU Installation: The case supports vertical installation of graphics cards to showcase lighting effects. Note that vertical insertion graphics card mode requires purchasing a graphics card conversion bracket and PCI-E extension cable separately. When using vertical GPU mode, the bottom fan can be installed on the outer side of the chassis bottom for ambient lighting effects when placed on a desktop.

    Vertical GPU installation in Jonsbo X400 ATX Case
    Figure 2.7: Vertical graphics card installation option.
  4. Storage Drive Installation: The case provides 1x 2.5" SSD drive bay and up to 2x 3.5" HDD drive bays.
  5. Cooling System Installation: The X400 offers extensive cooling options. Refer to the specifications for fan and water cooling support.
    Fan and Radiator installation diagram for Jonsbo X400 ATX Case
    Figure 2.8: Fan and radiator installation options (360 AIO, 280 AIO, 14cm FAN x2, 12cm FAN x3, 12cm FAN x2, Air Cooler 176mm MAX).

    The chassis has a total of 13 fan slots, providing superior heat dissipation. The top water-cooling fan and bottom fan can fully expose side lighting effects or screen content.

    Motherboard Auxiliary Air-Cooling System: You can install a dual 12cm fan in the rear compartment to direct airflow to the motherboard compartment. This provides additional cool air for power supply components (MOSFETs), memory, and CPU, enhancing stability for high-power hardware operation.

    Diagram showing dual 12cm fan installation for motherboard cooling
    Figure 2.9: Motherboard auxiliary air-cooling system with dual 12cm fan installation.

    Note: If installing dual 14cm fans or a 280mm liquid cooler, it is not compatible with the motherboard compartment air baffle. This component must be removed.

  6. Cable Management: The case features a removable dual-wire guard plate with a backrest for refreshing computer setup experience and hidden front-end I/O wiring for a more organized build.
    Removable dual-wire guard plate for cable management
    Figure 2.10: Rear view showing cable management area and removable wire guard.

2.3. Front I/O Interface

The front panel provides convenient access to essential ports:

  • USB 3.2 Gen 1 Type-A * 2
  • USB 3.2 Gen 2 Type-C * 1
  • AUDIO * 1 & MIC * 1
  • Power Button
  • Reset Button
Front I/O interface diagram for Jonsbo X400 ATX Case
Figure 2.11: Front I/O ports layout.

3. Operating Instructions

  1. Power On: After all components are installed and connected, connect the power cord to the PSU and a wall outlet. Press the power button on the front panel to start your system.
  2. ARGB Lighting Control: The X400 series features ARGB lighting effects to enhance the e-sports atmosphere. The IO position also has ARGB light strip decoration. These typically connect to your motherboard's 5V ARGB header for software control or a dedicated controller.
    Jonsbo X400 ATX Case with ARGB lighting on a desk setup
    Figure 3.1: X400 case showcasing ARGB lighting effects.

    The top water-cooling fan and bottom fan can both fully expose the side lighting effect or the screen content, depending on your configuration.

    Diagram showing exposed side lighting from top and bottom fans
    Figure 3.2: Exposed side lighting effect from fans.

3.1. Product Features Video

Video 3.1: An overview of the JONSBO X400 ATX Case features and design.

4. Maintenance

  • Dust Cleaning: Regularly clean dust from the case and fans to maintain optimal thermal performance. The tool-free design allows for easy access to internal components for cleaning.
  • Component Inspection: Periodically check all installed components and connections to ensure they are secure.

5. Troubleshooting

  • Unit fails to power on: Check all power connections, including the PSU, motherboard, and front panel power switch.
  • Poor heat dissipation: Clean any accumulated dust from fans and radiators. Consider adding additional fans if temperatures remain high.
  • Excessive noise: Verify that all screws, especially those securing fans and components, are securely tightened. Loose components can cause vibrations and noise.

6. Specifications

6.1. Model Differences

The primary difference between the X400 and X400 PRO models lies in the material of the panel/frame:

  • X400: Panel/frame made of ABS engineering plastic + 2H hard coating.
  • X400 PRO: Panel/frame made of aluminum alloy material.

6.2. General Specifications

Feature X400 X400 PRO GRAY
Chassis Materials SPCC&SECC, ABS plastic, tempered glass SPCC&SECC, ABS plastic, tempered glass, aluminum alloy
Chassis Size (D*W*H) 460.2mm * 310.3mm * 476.5mm 460.7mm * 310.9mm * 476.8mm
Compatible Motherboards MINI-ITX / MICRO-ATX / ATX, compatible with back plug motherboards
Drive Bays (2.5" SSD) 1 unit
Drive Bays (3.5" HDD) Up to 2 units
Front Interface USB 3.2 Gen 1 Type-A * 2 / USB 3.2 Gen 2 Type-C * 1 / AUDIO * 1 & MIC * 1
Fan Support (Top) 3 * 120mm / 2 * 140mm (optional)
Fan Support (Side) 3 * 120mm (optional)
Fan Support (Back) 2 * 120mm (optional)
Fan Support (Rear) 2 * 120mm (optional)
Fan Support (Bottom) 3 * 120mm (optional)
Water Cooling Support (Top) 240mm / 280mm / 360mm cold row
Water Cooling Support (Side) 360mm cold row
ATX PS2 Power Supply Compatibility ≤ 180mm
CPU Heatsink Height Limit 176mm
GPU Compatible Size (Length) Limited to 427mm
Net Weight 10.2kg 11.3kg
Gross Weight 12.2kg 13.1kg
Temperature comparison data for X400 series dual 12cm fan configuration
Figure 6.1: Temperature comparison data for X400 series dual 12cm fan configuration, showing CPU, VRM, and DIMM temperature reductions with fans on.

7. User Tips

  • Fan Customization: The included fans offer good airflow and flexible RGB customization. The 3-leaf fans have a unique connection method with Type-C like terminals at both ends, allowing for easy customization of cable direction.
  • Button Functionality: During initial setup, verify the functionality of the power and reset buttons, as some users have reported them being reversed.

8. Warranty & Support

Warranty Period: 1 year from the date of purchase.

For further assistance or support, please refer to the seller's official channels or contact customer service.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.