1. Introduction
Thank you for choosing the OPUYYM Single Crystal Copper Headphone Cable. This manual provides essential information for the proper setup, operation, and maintenance of your new audio cable. Please read it carefully to ensure optimal performance and longevity of your product.
2. Product Overview
The OPUYYM Single Crystal Copper Headphone Cable is designed to deliver high-fidelity audio transmission between your audio source and headphones. Crafted from high-purity single crystal copper, this cable ensures minimal signal loss and enhanced sound clarity. It is available in various configurations to suit a wide range of headphones and audio devices.

Figure 2.1: OPUYYM Single Crystal Copper Headphone Cable (Example Configuration)

Figure 2.2: Detail of the 3.5mm Audio Plug and Cable Braid

Figure 2.3: Detail of Headphone-Side Connectors
3. Specifications

Figure 3.1: Cable with Key Specifications
| Feature | Description |
|---|---|
| Brand | OPUYYM |
| Material | Single crystal copper plated with silver |
| Available Lengths | 1.2m, 2m, 2.5m |
| Headphone Connectors (Pins) | MMCX, 0.78mm 2-pin, QDC |
| Audio Source Plugs | 2.5mm, 3.5mm, 4.4mm, Type-C, iOS |
| Origin | Mainland China |
| Package Dimensions (Approx.) | 30cm (L) x 30cm (W) x 5cm (H) |
| Package Weight (Approx.) | 0.3 kg |
4. Setup
Follow these steps to correctly connect your OPUYYM headphone cable:
- Identify Connectors: Ensure that the headphone-side connectors (MMCX, 2-pin, or QDC) on your cable match the input ports on your headphones. Similarly, ensure the audio source plug (2.5mm, 3.5mm, 4.4mm, Type-C, or iOS) matches your audio device.
- Connect to Headphones:
- For MMCX: Align the cable connector with the headphone port and push firmly until you feel a click. To disconnect, pull straight out from the connector housing (do not pull on the cable itself).
- For 2-pin (0.78mm): Carefully align the two pins on the cable with the two holes on your headphone. Note the L (Left) and R (Right) markings on the connectors. Push gently but firmly until fully seated. Some 2-pin connectors may have a specific orientation (e.g., a small dot or notch for polarity); ensure these match if present.
- For QDC: Align the QDC connector with the headphone port and push firmly. The connector is designed for a secure fit.
- Connect to Audio Source: Insert the audio source plug (e.g., 3.5mm jack) into the corresponding port on your smartphone, digital audio player (DAP), amplifier, or other audio device.
- Verify Connection: Ensure all connections are secure before playing audio.

Figure 4.1: Cable Connected to In-Ear Monitors
5. Operating Instructions
Once the cable is securely connected to your headphones and audio source, simply power on your audio device and begin playback. The cable requires no special operation beyond proper connection.
6. Maintenance
To ensure the longevity and optimal performance of your cable, follow these maintenance guidelines:
- Cleaning: Use a soft, dry, lint-free cloth to gently wipe the cable and connectors. Avoid using harsh chemicals, solvents, or abrasive materials.
- Storage: When not in use, store the cable in a clean, dry place. Avoid tightly coiling or kinking the cable, which can damage the internal wires. Do not expose the cable to extreme temperatures or direct sunlight for prolonged periods.
- Handling: Always grasp the connector housing when plugging or unplugging the cable. Avoid pulling directly on the cable itself, as this can strain the connections and lead to damage.
- Moisture: Keep the cable away from water and high humidity. If the cable gets wet, disconnect it immediately and allow it to dry completely before reuse.
7. Troubleshooting
If you encounter any issues with your OPUYYM headphone cable, try the following troubleshooting steps:
- No Sound or Intermittent Sound:
- Ensure all connections (headphone-side and audio source-side) are secure and fully seated.
- Test your headphones with another known-working cable or audio source to rule out issues with the headphones or source device.
- Gently twist the connectors while audio is playing to check for loose internal connections.
- Poor Sound Quality (Static, Distortion, Low Volume):
- Verify that the cable connectors are clean and free of debris.
- Ensure the audio source volume is set appropriately.
- Test with another audio source or headphones to isolate the problem.
- Physical Damage: If the cable shows signs of fraying, bending, or damage to the connectors, discontinue use to prevent further issues or potential damage to connected devices.
8. User Tips
Based on user feedback, here are some tips for an enhanced experience:
- Left/Right Identification: Some users find the L/R markings on the headphone connectors subtle. Consider adding small, distinct markers (e.g., a tiny piece of colored tape or heat shrink tubing) to easily distinguish left from right, especially in low light.
- Cable Length: When selecting a cable, consider your typical usage scenario. A shorter cable can be more convenient for portable use, while a longer one might be better for desktop setups. Shorter cables can also theoretically offer slightly better electrical characteristics due to reduced impedance.
- Flexibility and Handling: Users appreciate the cable's flexibility and resistance to tangling, making it easy to manage during use and storage.
9. Warranty and Support
For any questions, technical support, or warranty inquiries, please contact the seller directly through your purchase platform. Please refer to your purchase details for specific warranty terms and conditions.
A PDF user manual may also be available for additional details: View User Manual (PDF)