Peocke GPS Smart Tag

Contents

Peocke GPS Smart Tag User Manual

For Android Find Hub Tracker Kit

1. Introduction

The Peocke GPS Smart Tag is a smart tracker device designed to help you quickly and securely locate your personal items. It leverages Google's Find Hub network and pairs with the "Find Hub" app on compatible Android devices to display item locations on Google Maps.

All location information remains private and secure. The Google Find Hub network requires location services and Bluetooth to be enabled on your Android device, along with cell service or an internet connection. It is compatible with Android 9+ on select devices.

Peocke GPS Smart Tag Kit for Android Find Hub. Shows four smart tags and four magnetic silicone cases, indicating compatibility with Android Find Hub.

Image: Peocke GPS Smart Tag Kit for Android Find Hub. Includes smart tags and magnetic silicone cases.

2. Safety Information and Warnings

WARNING: INGESTION HAZARD

  • This product contains a button cell or coin battery.
  • Death or serious injury can occur if ingested.
  • A swallowed button cell or coin battery can cause internal chemical burns in as little as 2 hours.
  • Keep new and used batteries OUT OF REACH of CHILDREN.
  • Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.

General Battery Warnings:

  • Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children.
  • DO NOT dispose of batteries in household trash or incinerate.
  • Even used batteries may cause severe injury or death.
  • Call a local poison control center for treatment information.
  • Non-rechargeable batteries are not to be recharged.
  • Do not force discharge, recharge, disassemble, heat above 50°C/122°F or incinerate.
  • Ensure batteries are installed correctly according to polarity (+ and -).
  • Do not mix old and new batteries, different brands, or types of batteries.
  • Always completely secure the battery compartment. If it does not close securely, stop using the product, remove the batteries, and keep them away from children.

3. Setup Guide

3.1. Install and Log In to Google Find Hub App

  1. Go to Google Play Store and search for "Find Hub".
  2. Install the app or click 'Update' if already installed.
  3. Open the app from your phone's home screen.
  4. Log in to the Find Hub app using your Google Account. If you have multiple accounts, the tag will link to the primary account setup on your phone.
  5. Grant any requested permissions and review the terms to continue.

3.2. Power On Your Smart Tag

Press and hold the circular dot on the device's power button for 3 seconds. A "ring-ring" chime indicates that the device has powered on.

3.3. Connect to Find Hub App

  1. Ensure your phone's Bluetooth is ON and you are connected to the internet.
  2. Bring your Smart Tag close to your phone.
  3. Wait for a "Wireless tag" pop-up to appear on your phone.
  4. On the pop-up bottom sheet, tap 'Connect'.
  5. Read and accept the prompts to complete the pairing process.

3.4. Attaching the Magnetic Case

The magnetic case allows you to securely attach your Smart Tag to various surfaces.

Installation steps for the magnetic case. Step 1: Attach metal sides of two stickers to the case. Step 2: Tear off white paper. Step 3: Stick the protective case onto the surface of the item to track.

Image: Installation steps for the magnetic case.

  1. Attach the metal sides of the two provided stickers to the magnetic silicone case.
  2. Tear off the white protective paper from the stickers.
  3. Stick the protective case onto the surface of any item you wish to track.
Exploded view of the magnetic case components: Silicone Protective Case, Metal Sheet Stickers, and a Strong Neodymium Magnet. The diagram shows how the Smart Tag fits within these components.

Image: Exploded view of the magnetic case components for the Peocke Smart Tag.

4. Operating Instructions

4.1. Nearby Finding

  1. In the Find Hub app, go to "Devices" and find "Available devices nearby".
  2. If you see "Wireless tag", tap it and wait for the "Wireless tag" pop-up to show.
  3. If "Wireless tag" does not appear, shut down and restart your Smart Tag, or reset it, until "Wireless tag" appears.
  4. Once connected, you can use the app to narrow down the location based on signal strength if your item is nearby.
  5. If your device is within wireless signal range, select it in the app and tap "Play Sound" to locate it. Tap "Stop Sound" to silence the chime.
  6. You can also use Google Assistant on your Google Home or Pixel Watch (e.g., "Hey Google, find my wallet").

4.2. Lost Mode

If your item is lost, select the device in the "Google Find Hub" app and tap "Mark as lost". You will receive a notification when its location becomes available. You can also leave your contact information for the finder to reach you.

4.3. Location Sharing

In the Find Hub app, select your device and tap "Share Device". After the recipient confirms sharing, the accessory will be visible on their Find Hub app list, and both accounts will see location updates and can ring the device locally.

4.4. Unknown Tracker Alerts

The Find Hub network is designed to deter unwanted tracking. If your Android phone detects an unfamiliar device moving with you, you'll receive a notification. You can view the unknown device on a map, ring it to find it, or get further help.

4.5. Privacy

Your location data is end-to-end encrypted, meaning Google cannot view or access it. Only you can see where your items are. The Find Hub app does not use or share your data, ensuring your information remains confidential.

4.6. Button Functions

  • Power On: Press and hold the function button for 3 seconds. A "ring-ring" chime indicates power on. If not linked to a Google account, it will close within 10 minutes automatically.
  • Power Off: Hold the function button for 3 seconds, then release. Two beeps indicate power off. (Note: Pressing for less than 3 or more than 5 seconds will not shut down the device. Shutdown timers prevent accidental shutdowns.)
  • Restore Factory Settings: Press the function button twice (one beep), then four times rapidly, then hold it a fifth time until you hear a "ring-ring" chime. The device is now reset.
Peocke GPS Smart Tag with magnetic case attached discreetly under a bicycle seat.

Image: Smart Tag discreetly attached under a bicycle seat.

Peocke GPS Smart Tag with magnetic case placed inside a bag pocket, demonstrating asset protection.

Image: Smart Tag placed inside a bag pocket for asset protection.

5. Maintenance

5.1. Battery Replacement

The Peocke GPS Smart Tag uses a CR2032 3V coin cell battery.

  1. Insert a shell opening tool (or a similar thin, flat tool) into the small gap on the side of the Smart Tag.
  2. Rotate the tool 90 degrees to gently open the shell.
  3. Carefully use your fingernails to open the case further.
  4. Replace the battery with a new CR2032 3V battery, ensuring the positive pole (with text) faces upward.
  5. Close the case securely until it clicks.

6. Troubleshooting: Can't Connect My Device With Google's Find Hub App

If you are experiencing connection issues, try the following methods:

  1. Restart Phone's Bluetooth and Cellular Network: Turn off and on your phone's Bluetooth and cellular network. Then, shut down and restart the Smart Tag. Wait for the "Wireless tag" pop-up to appear.
  2. Reset Your Device: Reset your Smart Tag (see Button Functions above), then shut down and restart it. Wait for the "Wireless tag" pop-up.
  3. Restart Your Phone: Restart your phone, shut down and restart the Smart Tag. Wait for the "Wireless tag" pop-up.
  4. Update Your Phone's Software: Go to your phone's settings, find "System", then "System update" to check for and install any available updates.
  5. Check Phone's Google Services: Go to phone settings, find "Google service & preferences", then "All services", and finally "Connected devices & Sharing" to ensure services are active.

7. Specifications

FeatureSpecification
Battery TypeCR2032 Coin Cell
Battery Voltage3V DC
CompatibilityAndroid 9+ (select devices)
NetworkGoogle Find Hub Network
WaterproofYes

8. User Tips

  • Users report that the Peocke GPS Smart Tag connects quickly and reliably via the Find Hub app, making it very easy to use.
  • Ensure you have fresh batteries installed for optimal performance, as some users have noted needing to change batteries upon receipt.
  • For best long-distance tracking, ensure your device is in an area with good Android device density to leverage the full Find Hub network.

9. Frequently Asked Questions (FAQ)

Q: What if I delete the device from Find Hub and it won't reconnect even after resetting?
A: Please refer to the "Troubleshooting" section, specifically methods for resetting your device and restarting your phone and the Smart Tag.
Q: Is the Peocke GPS Smart Tag compatible with Xiaomi phones?
A: The Smart Tag works on Android 9+ on select devices. Xiaomi phones running Android 9+ should generally be compatible, provided they support Google's Find Hub services.
Q: How long does the battery last, and is the Find Hub app free or paid monthly?
A: Battery life depends on usage patterns. The "Find Hub" app is part of Google's services and is typically free to use.
Q: Does it locate vehicles or motorcycles well at long distances?
A: The Smart Tag leverages Google's Find Hub network, which relies on other Android devices in proximity to the tag. Long-distance tracking effectiveness depends on the density of Android devices in the area where the tag is located.

10. Warranty and Support

For warranty information and customer support, please refer to the seller's terms of service or contact the retailer directly. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.