1. Introduction
Thank you for choosing the TENON K7 Mini Smart Bluetooth Lock. This manual provides essential information for the safe and efficient use of your smart lock. Please read it carefully before installation and operation.
Package Contents
| Item | Quantity | Item | Quantity |
|---|---|---|---|
| Front Panel | 1 | Mortise Lock | 1 |
| Back Panel | 1 | Cylinder | 1 |
| Accessories | 1 Set | Mechanical Key | 2 |
| User Manual | 1 | Card | 2 |
2. Setup and Installation
The TENON K7 smart lock is designed for easy installation and fits American Standard doors. Ensure your door meets the following specifications:
- Fit Door Thickness: 1.4" - 2.3/8" (35mm - 60mm)
- Backset Standard: 2-3/8" or 2-3/4" (60mm or 70mm)
- Door Hole Diameter: 2-1/8" (54mm)

Figure 2.1: Installation dimensions for the TENON K7 Smart Lock.
Installation Steps
- Modify Mortise Lock Backset: Adjust the mortise lock backset (60mm or 70mm) based on the distance from the hole centerline to the door edge. To adjust: hold the tail of the lock body and rotate the head clockwise until it moves outward. Rotate 180 degrees until it cannot move further. Recover the deadbolt with a screwdriver.
- Install Mortise Lock: Ensure the mortise is in the open position. Fix the front panel and rear cover plate with 2pcs pan head screws.
- Connect Wiring: Plug the terminal into the flat cable interface of the circuit board on the rear panel. Install the rear panel to the rear cover plate with screws (2pcs pan heads + 1pc countersunk head). Ensure the flat cable is straight and not stuffed into the door to avoid poor operation.
- Install Lock Cylinder: Release the front panel cylinder pressing plate, install the cylinder, and tighten the pressing plate with screws.
- Test Installation: After installing the battery, touch the screen (press any key to wake up) to check for responses. If there is no response, check battery connection and flat cable connection.
Video 2.1: Installation overview and unlocking methods for the TENON K7 Smart Lock.
3. Operating Instructions
The TENON K7 Smart Lock offers multiple ways to unlock and various settings for enhanced security and convenience.

Figure 3.1: The TENON K7 Smart Lock supports 5-in-1 access methods: Passcode, App Control, Fingerprint, IC Card, and Mechanical Key.
3.1 Initial Setup (Demo Mode)
After installation, the lock is in demo mode. Any fingerprint or password can open the door. You can test the system with voice prompts.
3.2 Registering an Administrator
- Touch the touchscreen to wake the lock.
- Double-click '#' to enter setting mode.
- Input fingerprint 6 times.
- Input a 6-8 digit password and press '#'.
- Input the same password again and press '#'.
- Scan IC card (optional).
- The lock will confirm success.
Note: The first registered administrator is assigned ID 01. A password must be set during initial administrator registration.
3.3 Registering a User
- Touch the touchscreen.
- Double-click '#' to enter setting mode.
- Verify administrator fingerprint/password.
- Press '1' to add user.
- Input user ID (02-99) and press '#'.
- Input fingerprint 6 times.
- Input a 6-8 digit password and press '#'.
- Input the same password again and press '#'.
- Scan IC card (optional).
- The lock will confirm success.
3.4 Deleting a User
- Touch the touchscreen.
- Double-click '#' to enter setting mode.
- Verify administrator fingerprint/password.
- Press '2' to delete user.
- Input the ID of the user to delete (02-99) and press '#'.
- Choose what to delete: '1' for fingerprint, '2' for password, '3' for IC card, '6' for whole ID.
- The lock will confirm success.
3.5 Network Setting (Tuya App)
Download the 'Tuya Smart' app from your app store. Ensure Bluetooth is enabled on your phone.
- Touch the touchscreen.
- Double-click '#' to enter setting mode.
- Verify administrator fingerprint/password.
- Press '3' for network setting.
- Press '*' to exit.
- In the Tuya app, click 'Add device', then 'Add' and follow the on-screen instructions to connect to your Wi-Fi network.
3.6 System Settings
- Touch the touchscreen.
- Double-click '#' to enter setting mode.
- Verify administrator fingerprint/password.
- Press '4' to enter system settings.
- Options include:
- '1' to query lock ID.
- '2' to query date and time.
- '3' to query software version.
- '4' for volume settings (1-4 levels).
- '6' for doorbell settings (on/off).
- '7' for language settings.
3.7 Lock Mode Settings
You can set the lock to automatically lock after a delay or require manual locking.
- Touch the touchscreen.
- Double-click '#' to enter setting mode.
- Verify administrator fingerprint/password.
- Press '9' for lock mode setting.
- For Automatic Locking Mode: Press '1', input delay time (5-254 seconds) and press '#'.
- For Manual Locking Mode: Press '2', then '*' to exit.
3.8 Anti-Peeking Password
To protect your password from prying eyes, you can add random digits before and after your actual password. The lock will still unlock as long as the correct password sequence is embedded within the entered digits.

Figure 3.2: Anti-peeking password feature allows adding random digits before and after your actual password for enhanced security.
3.9 Mute Mode
Press the '*' key twice to enable or disable mute mode.
3.10 Anti-Lock Mode
Long press the unlock button on the back panel to enable or disable anti-lock mode.
4. Maintenance
Proper maintenance ensures the longevity and optimal performance of your TENON K7 Smart Lock.
4.1 Battery Replacement and Low Power Warning
The lock is powered by 4 AA Alkaline batteries. When the system indicates a low battery, please replace or recharge the battery promptly.

Figure 4.1: The TENON K7 Smart Lock offers up to 1 year of battery life and provides a low battery alert at 15%.
4.2 Emergency Power Supply
If the batteries are completely drained, you can use a portable power bank with a Type-C interface to supply emergency power. Connect the Type-C cable to the emergency power supply interface on the lock to open it.
5. Troubleshooting
5.1 System Lock (Trial and Error Settings)
If three incorrect verification attempts are made within 5 minutes, the system will lock for 30 seconds and issue an alarm notification.
5.2 Anti-Pry Alarm Function
If someone attempts to tamper with the lock from outside, causing the front panel to loosen, the lock will emit an alarm sound.
5.3 System Halt / No Response
If the system halts or does not respond after installation:
- Use a Type-C cable to connect to a portable power bank and insert it into the emergency power supply interface to reboot the system.
- Check battery connections and ensure the flat cable is properly inserted and not damaged.
- If the circuit board fails, use the mechanical key to open the door.
5.4 System Reset Function (Forgot Admin Password)
If you forget the administrator password:
- Remove one battery from the lock.
- Insert a pin into the reset hole and keep it pressed.
- Reinstall the battery.
- Release the pin when you hear