KAIRUIANG Pebble Ceiling Lamp

Contents

KAIRUIANG Modern Minimalist Pebble Ceiling Lamp

User Manual

1. Introduction

Thank you for choosing the KAIRUIANG Modern Minimalist Pebble Ceiling Lamp. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and keep it for future reference.

KAIRUIANG Modern Minimalist Pebble Ceiling Lamp overview

Figure 1: Overview of the KAIRUIANG Modern Minimalist Pebble Ceiling Lamp, highlighting its unique shape, soft light, wide adaptability, 53W*2 power, and 10-15m² applicable area.

2. Safety Warnings

IMPORTANT SAFETY INSTRUCTIONS. READ AND FOLLOW ALL INSTRUCTIONS.

  • WARNING: Risk of electric shock. Installation, inspection, and maintenance of the lamps must be carried out by professional electricians. Improper handling may damage the lamps or cause dangerous situations.
  • The lamp must be used within its rated voltage range (220 V AC).
  • Do not use in wet locations. This lamp is for indoor use only. Do not expose to rain or moisture.
  • Do not cover the lamp or use non-compliant power adapters. Do not overload the socket.
  • Do not modify or replace the electronic components inside the lamp, as this may damage the lamp.
  • Clean the fixture only with a clean, soft, dry cotton cloth. Do not use any liquids for cleaning, as this may cause discoloration or damage.
  • WARNING: Not suitable for children under 3 years. Small parts (e.g., bulbs, if applicable) may cause a choking hazard. Keep out of reach of children under 3 years old.
  • Do not use with dimmers not specified in this manual.

3. Setup and Installation

Before beginning installation, ensure the power supply is disconnected at the circuit breaker to prevent electric shock.

3.1 Components Check

Verify that all components are present and undamaged before proceeding with installation. The package includes the lamp body, hanging plate, screws, gaskets, and a remote control.

3.2 Installation Steps

  1. Carefully remove any small screws on the top and bottom of the fixture to separate the lamp body from the hanging plate.
  2. Fix the hanging plate securely to the ceiling. Align the screw holes on the hanging plate with pre-drilled holes in the wall/ceiling. Use the provided gaskets and self-tapping screws to secure it firmly.
  3. Connect the electrical wires. Ensure correct polarity: connect the positive (+) wire to the positive terminal and the negative (-) wire to the negative terminal. If unsure, consult a qualified electrician.
  4. Align the lamp body with the hanging plate and fix it using flathead screws.
  5. Remove any protective film from the lamp.
  6. Insert the plug into the socket and turn on the switch to light up the lamps.
Installation diagram showing hanging board and wiring

Figure 2: Installation diagram illustrating the hanging board and wiring connections.

After installation, it is recommended to test the light before final use, especially after long-distance transport, to ensure proper functionality.

4. Operating Instructions

Your KAIRUIANG Pebble Ceiling Lamp is designed for ease of use with its remote control functionality.

4.1 Power On/Off

Use the wall switch to turn the lamp on or off. For full functionality, ensure the wall switch is in the 'on' position.

4.2 Remote Control Functions

The included remote control allows you to adjust various lighting parameters:

  • Color Temperature Adjustment: Freely switch between White, Neutral, and Warm light settings to suit your mood or activity.
  • Brightness Adjustment: Dimmable feature allows you to adjust the light intensity from 2000 to 82000 Luminous Flux.
  • Rotatable and Adjustable Design: The lamp features a rotatable and adjustable design, allowing you to direct the light as needed.
Diagram showing rotatable and adjustable feature

Figure 3: The lamp's design allows for rotatable and adjustable positioning.

4.3 Diffuse Reflective Luminescence (DRL)

The light source is strategically located within the inner dimension of the light ring, ensuring uniform light scattering and a brighter, more comfortable light experience.

Diagram illustrating Diffuse Reflective Luminescence (DRL)

Figure 4: Illustration of Diffuse Reflective Luminescence (DRL) for uniform light distribution.

5. Maintenance

Proper maintenance ensures the longevity and optimal performance of your ceiling lamp.

5.1 Cleaning

To clean the fixture, use only a clean, soft, dry cotton cloth. Do not use any liquids, abrasive cleaners, or chemical solvents, as these can cause discoloration or damage to the fixture's finish and electronic components.

5.2 Component Replacement

The lamp features an integrated LED light source and PCBA. Do not attempt to modify or replace internal electronic components. Such actions may damage the lamp and void any warranties.

6. Troubleshooting

If you encounter issues with your KAIRUIANG Pebble Ceiling Lamp, please refer to the following common troubleshooting steps:

  • Lamp does not turn on:
    • Check if the wall switch is in the 'on' position.
    • Ensure the power supply at the circuit breaker is on.
    • Verify that the wiring connections are secure and correctly polarized (positive to positive, negative to negative).
    • Confirm the lamp is receiving the correct voltage (220 V).
  • Remote control not working:
    • Check the batteries in the remote control and replace them if necessary.
    • Ensure there are no obstructions between the remote control and the lamp.
    • Try pairing the remote control again if applicable (refer to specific remote instructions if provided separately).
  • Light flickering or inconsistent brightness:
    • Ensure the lamp is not connected to an incompatible dimmer switch.
    • Verify stable power supply.

If the problem persists after following these steps, please contact customer support for assistance.

7. Specifications

Detailed specifications of the lamp

Figure 5: Detailed specifications including dimensions, light source, material, and applicable area.

Product Specifications
Feature Detail
Brand Name KAIRUIANG
Item Type Ceiling Lights
Style Modern Style
Installation Method Surface mounted (self-contained)
Body Material Aluminum ring, Iron chassis, Acrylic
Light Source Integrated LED (53W*2)
Luminous Flux 2000-82000 lm
Voltage 220 V AC
Is Dimmable Yes (Remote Control)
Switch Type Remote Control
Applicable Area 10-15 m²
Dimensions (approx.) 50 cm x 40 cm
Package Dimensions (approx.) 53 cm (L) x 53 cm (W) x 11 cm (H)
Package Weight (approx.) 2.4 kg
Certification CE
Color Rendering Index (CRI) Ra ≥ 97
Eye Protection Features Safe blue light (ROG class IEC 62471), uniform light, soft light, healthy circadian rhythm support
Information on high Color Rendering Index (CRI)

Figure 6: Explanation of high Color Rendering Index (CRI) for accurate color reproduction and eye comfort.

Close-up of lamp material and light quality

Figure 7: Close-up showing the acrylic and silicone lampshade, emphasizing uniform, soft light and eye protection.

Benefits of full-spectrum lighting

Figure 8: Benefits of full-spectrum lighting, including eye protection, high color rendering, reduced eye fatigue, and support for healthy circadian rhythm.

8. User Tips

While specific user reviews are not available, general tips for optimal use of modern ceiling lamps include:

  • Experiment with different color temperatures (White, Neutral, Warm) to find the best ambiance for various activities and times of day.
  • Utilize the dimming feature to create mood lighting or reduce brightness for relaxation.
  • Take advantage of the rotatable design to highlight specific areas or adjust light direction as needed.

9. Warranty and Support

For detailed item guides and documents, including a comprehensive user manual in PDF format, please refer to the official documentation provided by the seller. You can often find this on the product's purchase page or by contacting the seller directly.

A PDF version of the user manual is available for download: Download User Manual (PDF)

This product complies with the following regulations and directives:

  • Low Voltage Directive 2014/35/EU
  • Electromagnetic compatibility Directive 2014/30/EU
  • Restriction of the use of certain hazardous substances (RoHS) Directive 2011/65/EU
  • CE Certification

For further assistance or technical support, please contact the KAIRUIANG customer service team through your purchase platform.

© 2024 KAIRUIANG. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.