1. Introduction
Thank you for choosing the HYULIGHTS 7x40W Bee Eye Beam Wash Halo Effect Mini LED Moving Head. This professional moving head is a powerful and versatile device designed for various lighting applications.
For your safety and to ensure correct installation, operation, and maintenance, please read this user manual carefully before installing the device. Installation and operation should be performed by a qualified technician following these instructions strictly.
Unpacking
Upon unpacking the device, please ensure all components are present and undamaged. The carton box should contain:
- One power cable
- One user manual (this document)
- One or more light units (as per your purchase)
- One DMX cable
- Two omega brackets
If any damage is found or parts are missing, please contact your dealer immediately and do not install the device.
2. Setup & Installation
2.1 Cautions
- CAUTION! Keep this device away from rain and moisture!
- CAUTION! Unplug the mains lead before opening the housing.
- Every person involved with the installation, operation, and maintenance of this device must be qualified and follow the instructions in this manual carefully.
- Do not attempt installation yourself if you lack the necessary qualifications, as improper installation can result in bodily injury.
- Ensure the installation area can support a minimum point load of 10 times the device's weight.
- Fixture installation must always be secured with a secondary safety attachment, such as an appropriate safety cable.
- Never stand directly below the device when mounting, removing, or servicing the fixture.
- Ensure the fixture is kept at least 0.5m (1.5ft) away from any flammable materials (decoration, etc.).
- Complete all rigging and installation procedures before connecting the main power cord to the appropriate wall outlet.
2.2 Mounting Points
Overhead mounting requires extensive experience, including calculating working load limits and a fine knowledge of installation materials and periodic safety inspections. The device can be mounted using the provided omega brackets.

Image: Rear view of the moving head light, highlighting DMX and power connections.
2.3 DMX-512 Control Connection
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other side to the male 3-pin XLR input of the moving head. Multiple moving heads can be chained together through serial linking. The cable required should be a two-core, screened cable with XLR input and output connectors.
Refer to the DMX connection diagram below for proper wiring:
DMX Output DMX Input COMMON
3-Pin XLR Socket 3-Pin XLR Socket
1: Ground DMX+ DMX512 IN
2: Data (-) DMX- 3-PIN XLR
3: Data (+)3. Technical Specifications
| Feature | Specification |
|---|---|
| Voltage | AC110-240V 50-60Hz |
| Power Source | AC |
| Power Supply | 300W (Nominal Voltage: Other) |
| LEDs | 7pcs 40W RGBW 4in1 LEDs |
| Halo Effect | 24 LED SMD5050 RGB 3in1 |
| Luminous Flux | >82000 |
| CTO (Color Temperature) | 8000K-2000K |
| Pan Scan | 540° (16bit) Electric correction |
| Tilt Scan | 270° (16bit) Electric correction |
| Beam Wash Zoom | 3-60 degrees |
| Channels | 30/42/58 channels |
| Control Modes | DMX512/Master-slave/Auto/Sound.RDM |
| Strobe | 25 Flashes per second (any color) |
| Dimmer | Electronic variable (0-100%) |
| Control Panel | LCD Display Screen |
| Net Weight (N.W) | 6.0 KG |
| Gross Weight (G.W) | 7.2 KG |
| Product Size | 36x27x21cm |
| Packing Size | 41x24x32cm |
| Certification | CE, FCC, RoHS, WEEE, NONE |
| Installation Method | Self-contained |
| Origin | Mainland China |
Image: The product in various lighting scenarios, demonstrating beam, wash, and halo effects.




4. Operating Instructions
4.1 Control Panel (LCD Display Screen)
The device features an LCD display screen for easy navigation and control. Use the menu buttons to access various settings and functions.

Image: Close-up of the LCD display screen, showing menu options.
| Menu | Function | Description |
|---|---|---|
| Set | Language | 中/EN |
| Dimmer Curve | Curve1-4 | |
| Speed Mode | Fast/Normal | |
| Load default | YES/Cancel | |
| Manual Mode All adjustments | 0-255 | |
| Hall crct | OFF/ON | |
| Encoder crct | OFF/ON | |
| Screen saver | OFF/ON | |
| Invert Screen | OFF/ON/Auto | |
| Calib | enter password | Lighting Calibration |
| Reset | Reset Effect Motor | Resets effect motor |
| Reset Scan Motor | Resets scan motor | |
| Reset ALL | Resets all settings | |
| Note | Sensor Info | Hall, X enco, Y enco |
4.2 DMX Channel Modes
The device supports 30, 42, or 58 DMX channels. Below are the DMX channel assignments and their functions.
30/58 DMX Channels
| 30CH | 58CH | Function | DMX Value | Description |
|---|---|---|---|---|
| 1 | 1 | Pan | 0-255 | Pan 0-540 |
| 2 | 2 | Pan Fine | 0-255 | Pan Fine 16bit |
| 3 | 3 | Tilt | 0-255 | Tilt 0-270 |
| 4 | 4 | Tilt Fine | 0-255 | Tilt Fine 16bit |
| 5 | 5 | Pan Tilt | 0-255 | Speed from fast to slow |
| 6 | 6 | Zoom | 0-255 | Zoom |
| 7 | 7 | Z motor rotation | 0-127 | 0~60 |
| 128-188 | Reverse rotation, from fast to slow | |||
| 189-193 | Stop Rotate | |||
| 194-255 | Rotation, from slow to fast | |||
| 8 | 8 | Total dimming | 0-255 | Linear dimming from dark to bright |
| 9 | 9 | Strobe | 0-3 | Lights off |
| 4-103 | Synchronous strobe speed from slow to fast | |||
| 104-107 | On lights | |||
| 108-207 | Bisection strobe speed from slow to fast (1HZ-25HZ) | |||
| 208-212 | On lights | |||
| 213-225 | Slow random strobe | |||
| 226-238 | Medium speed random strobe | |||
| 10 | 10 | Red | 0-255 | Dimming |
| 11 | 11 | Green | 0-255 | Dimming |
| 12 | 12 | Blue | 0-255 | Dimming |
| 13 | 13 | White | 0-255 | Dimming |
| 14 | 14 | CTO | 0-9 | No function |
| 10-255 | Color Temperature 8000K-2000K | |||
| 15 | 15 | Color gradient | 0-9 | No function |
| 10-255 | Color Macro Function | |||
| 16 | 16 | Static Effects | 0-29 | No function |
| 30-134 | Static Effects 1-7 (Color by 10CH, 11CH, 12CH, 13CH Control) (15 Number of effects) | |||
| 135-255 | Static Effects 8-16 (Color Fixing) (5 Number of effects) | |||
| 17 | 17 | Dynamic effect | 0-9 | No function |
| 10-124 | Dynamic effect 1-23 (Color by 10CH, 11CH, 12CH, 13CH Control) (5 Number of effects) | |||
| 125-255 | Dynamic effect 24-40 (Color Fixing) (5 Number of effects) | |||
| 18 | 18 | Effect Speed | 0-63 | LED Effect freeze |
| 64-158 | LED Effect Reverse from fast to slow | |||
| 159-160 | LED Effect freeze | |||
| 161-255 | LED Effect Forward rotation from slow to fast | |||
| 19 | 19 | Background color R | 0-255 | Dimming |
| 20 | 20 | Background color G | 0-255 | Dimming |
| 21 | 21 | Background color B | 0-255 | Dimming |
| 22 | 22 | Background color W | 0-255 | Dimming |
| 23 | 23 | Reset | 0-25 | No function |
| 26-76 | Effect motor reset (reset is effective for 5 seconds) | |||
| 77-127 | Pan Tilt motor reset (reset is effective for 5 seconds) | |||
| 128-255 | All motors reset (reset is effective for 5 seconds) | |||
| 24 | 52 | LED Halo Dimming | 0-255 | LED Halo Dimming |
| 25 | 53 | LED Halo strobe | 0-4 | No function |
| 5-250 | Strobe from slow to fast | |||
| 26 | 54 | LED Halo Red | 0-255 | Dimming |
| 27 | 55 | LED Halo Green | 0-255 | Dimming |
| 28 | 56 | LED Halo Blue | 0-255 | Dimming |
| 29 | 57 | LED Halo Effect | 0-51 | Dimming Mode |
| 52-255 | LED Halo Effect (4 Number of effects) | |||
| 30 | 58 | LED Halo Effect speed | 0-255 | effect speed from slow to fast |
42 DMX Channels
| CHANNELS | Function | DMX Value | Description |
|---|---|---|---|
| 1 | Red | 0-255 | Red Dimming |
| 2 | Red Fine | 0-255 | Red Fine |
| 3 | Green | 0-255 | Green Dimming |
| 4 | Green Fine | 0-255 | Green Fine |
| 5 | Blue | 0-255 | Blue Dimming |
| 6 | Blue Fine | 0-255 | Blue Fine |
| 7 | White | 0-255 | White Dimming |
| 8 | White Fine | 0-255 | White Fine |
| 9 | CTO | 0-255 | Color Temperature 8000K-2000K |
| 10 | Color gradient | 0-255 | Color Macro Function |
| 11 | Strobe | 0-255 | Strobe (1HZ-25HZ) |
| 12 | Total dimming | 0-255 | Linear dimming from dark to bright |
| 13 | Dimming Fine | 0-255 | Dimming Fine |
| 14 | Pan | 0-255 | Pan motor |
| 15 | Pan Fine | 0-255 | Pan Fine |
| 16 | Tilt | 0-255 | Tilt motor |
| 17 | Tilt Fine | 0-255 | Tilt Fine |
| 18 | Function | 0-255 | Reserve |
| 19 | Reset | 0-255 | Various reset functions |
| 20 | Zoom | 0-255 | Zoom |
| 21 | Z motor rotation | 0-255 | Rotation control |
| 22 | Built-in effects | 0-255 | Built-in effects 0-63 |
| 23 | Effect Speed | 0-255 | LED Effect freeze |
| 24 | Effect fade | 0-255 | LED effect fade |
| 25 | Built-in effect red | 0-255 | Built-in effect red |
| 26 | Built-in effect green | 0-255 | Built-in effect green |
| 27 | Built-in effect blue | 0-255 | Built-in effect blue |
| 28 | Built-in effect white | 0-255 | Built-in effect white |
| 29 | Effect Dimming | 0-255 | LED 0-100% Dimming |
| 30 | Background dimming | 0-255 | 0-100% Background dimming |
| 31 | Effect Transition | 0-255 | LED change control |
| 32 | Effect Angle | 0-255 | LED Effect translation |
| 33 | Foreground strobe | 0-255 | Foreground strobe (with 11 channel) |
| 34 | Background strobe | 0-255 | Background strobe (with 11 channel) |
| 35 | Background selection | 0-255 | Background selection |
| 36 | LED Halo Dimming | 0-255 | LED Halo Dimming |
| 37 | LED Halo strobe | 0-255 | Strobe from slow to fast |
| 38 | LED Halo Red | 0-255 | Dimming |
| 39 | LED Halo Green | 0-255 | Dimming |
| 40 | LED Halo Blue | 0-255 | Dimming |
| 41 | LED Halo Effect | 0-255 | LED Halo Effect |
| 42 | LED Halo Effect speed | 0-255 | effect speed from slow to fast |
4.3 Product Demonstration Video
Video: A comprehensive demonstration of the 7x40W Bee Eye Beam Wash Halo Effect Mini LED Moving Head's features, including various light patterns, colors, and movement capabilities.
5. Maintenance
Regular maintenance is crucial for the longevity and optimal performance of your moving head light. Always disconnect the power before performing any maintenance.
5.1 Cleaning
- Clean the exterior casing and lenses regularly with a soft, lint-free cloth.
- For stubborn dirt, use a mild cleaning solution and ensure no liquid enters the device.
- Avoid using abrasive cleaners or solvents that could damage the finish.
5.2 Inspection
- Periodically check all cables (power, DMX) for signs of wear, cuts, or damage. Replace immediately if damaged.
- Inspect mounting hardware and safety cables for secure attachment and any signs of fatigue.
- Ensure all ventilation openings are clear of dust and debris to prevent overheating.
5.3 Storage
When not in use for extended periods, store the device in its original packaging or a suitable flight case in a dry, dust-free environment.
6. Troubleshooting
If you encounter issues with your moving head light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable disconnected, faulty power outlet, internal fuse blown. | Check power connections, try a different outlet, inspect/replace fuse (by qualified technician). |
| No DMX signal / erratic behavior | Incorrect DMX address, faulty DMX cable, DMX terminator missing, incorrect DMX mode. | Verify DMX address and mode, check DMX cable integrity, ensure DMX terminator is used on the last fixture, consult DMX channel tables. |
| Fixture not moving / incorrect movement | Pan/Tilt lock engaged, DMX channel values incorrect, motor calibration needed. | Ensure Pan/Tilt are free, check DMX values for Pan/Tilt, perform motor reset/calibration via control panel. |
| No light output | Dimmer channel at 0%, LED fault, internal connection issue. | Check dimmer DMX channel value (ensure it's above 0%), contact support if LEDs are faulty. |
| Overheating | Blocked ventilation, prolonged use in high ambient temperature. | Ensure clear airflow around the fixture, operate within specified temperature ranges, allow for cool-down periods. |
7. User Tips
- DMX Termination: Always use a DMX terminator on the last fixture in a DMX chain to prevent signal reflection and ensure stable operation.
- Power Cycling: If a fixture becomes unresponsive, try power cycling it (turn off, wait 10 seconds, turn on) to reset its internal systems.
- Software Updates: Check the manufacturer's website periodically for any firmware updates that might improve performance or add new features.
- Cable Management: Use proper cable management to keep DMX and power cables organized and prevent tripping hazards or damage.
- Environmental Considerations: Avoid operating the lights in excessively dusty, humid, or hot environments to prolong their lifespan.
8. Warranty & Support
This product comes with a 2-year warranty. We will send you brand new items for free or give you a full refund if any quality problems occur within 2 years from the date of purchase.
For detailed information, including a comprehensive user manual, please refer to the official PDF document: User Manual (PDF).
For quick assistance, our customer service team offers a quick response within 12 hours. It is recommended to contact us with any hesitation at any time of the day. Providing a video or pictures of the issue can help expedite the support process.
