WOFEA WG-088

Contents

WOFEA WG-088 Smart WiFi Garage Door Opener User Manual

Mobile Phone Remote Control Support Alexa Google Home

WOFEA Smart Garage Controller with accessories and smart home integration

WOFEA Smart Garage Controller (Model: WG-088) with included sensor, power plug, and integration with smartphone app, Google Home, and Amazon Alexa.

1. Introduction

Thank you for choosing the WOFEA WG-088 Smart WiFi Garage Door Opener. This device allows you to control your garage door remotely using your smartphone, voice commands via Amazon Alexa or Google Home, and set schedules or countdowns for automated operation. This manual provides detailed instructions for installation, setup, and operation to ensure a seamless experience.

2. Safety Information

  • Ensure all power is disconnected from your garage door opener before performing any wiring.
  • Keep hands and clothing clear of the garage door's moving parts during operation.
  • This device is designed for indoor use only.
  • Do not expose the device to moisture or extreme temperatures.
  • Always ensure the garage door path is clear before operating it remotely.

3. Package Contents

Please check the package for the following items:

  • WOFEA Smart Garage Controller (WG-088)
  • Wired Sensor (with cable)
  • Power Adapter (US/EU/AU/UK plug, depending on selection)
  • Connection Wires (Red & Black)
  • Mounting Screws and Brackets
  • Adhesive Pads (3M gums)
  • User Manual (this document, also available as PDF: View PDF)

4. Specifications

ParameterValue
Model NumberWG-088
Brand NameWOFEA
Wi-Fi StandardIEEE 802.11b/g/n (2.4G only)
Input PowerAC100-240V 50/60Hz
OutputNO (Normally Open)
App NameTuya Smart & Smart Life
Wired Sensor Length5m
CertificationCE
Encoding MethodFixed code

5. Setup

5.1. Test Device For Opener Compatibility

  1. Power up the garage controller.
  2. Use the included Red & Black wires to connect the device to your opener. Put each end to the same terminals as the wall button wires are terminated to.
  3. Use a tiny screw or nail to click the button in the device. Your garage door should activate.

If this test fails, your device may not be compatible. For additional installation instructions and a list of compatible models, please check your opener's user manual or contact support.

5.2. Pre-installation Checklist

  • Your smartphone or tablet should be connected to a 2.4G WiFi with internet access.
  • The device only supports 2.4G Wi-Fi. If you use a 5G router (which provides two Wi-Fi signals: 5G and 2.4G), please select the 2.4G WiFi to connect your smart phone.
  • Download one of the APPs: "Tuya Smart" or "Smart Life" from the App Store or Google Play Store.
  • During the pairing process, make sure that your iOS or Android device and the Garage controller are within the range of your WiFi router.
  • Make sure your router is MAC-open. If not, please cancel the router's MAC filtering setting first.

5.3. App Download & Device Addition

Download the App: Scan the QR codes below or search for "Tuya Smart" or "Smart Life" in your app store.

Tuya Smart and Smart Life app QR codes and interface

QR codes for Tuya Smart and Smart Life apps, with a view of the app's main interface.

Add Device:

  1. Power up the garage controller. Press the ON/OFF button and hold it until the blue light flashes rapidly.
  2. Ensure your cell phone is connected to your WiFi network and Bluetooth function is turned on.
  3. Launch the App. Tap the "+" icon on the right top corner.
  4. The app will auto-discover the device to add. (Alternatively, select "Electrical" > "Garage door opener (Wi-Fi)").
  5. Choose your 2.4G Wi-Fi network and input the password. Tap confirm.
  6. Tap "Confirm indicator rapidly blink" (if auto-discover doesn't work, ignore this step).
  7. The app will auto-connect with the device. Once the process is completed, it will prompt you to rename the device. Enter a new name and Save.

5.4. Wiring the Controller

Important: Perform this installation AFTER successfully adding the device to your app and ensuring your garage door is closed.

  1. 1st Step: Power up. Connect the power adapter to the controller and plug it into an outlet.
  2. 2nd Step: Connect to the wall console. Insert the Red & Black wires (2.0mm terminal) to the garage controller's input, then put each end to the same terminals as the wall button wires are terminated to on your garage door opener.
  3. 3rd Step: Connect to the garage door sensor. Insert the 2.0mm terminal of the sensor to the garage controller's input. Then, steadily install the sensor and the magnet of the gap within 3mm to 15mm on your garage door with screws/bracket/3M gums/wall nail/line holders/ties.
Diagram illustrating the installation of the garage door sensor

Diagram showing sensor installation on the garage door and wall, maintaining a 3-15mm gap between the sensor and magnet. Real-world examples of sensor placement are also shown.

6. Operating Instructions

6.1. Using the Mobile App (Tuya Smart / Smart Life)

Once the device is added to your app, you can control and monitor your garage door from anywhere.

Demonstration of the WOFEA Smart Garage Door Opener in action, showing a garage door opening and closing controlled by a smartphone app.

  • Open/Close: Tap the main button in the app to open or close your garage door. The app will display the current status (Closed/Opening/Opened/Closing).
  • History: View a log of when the garage door was opened or closed.
  • Schedule: Set specific times for your garage door to open or close automatically.
  • Countdown: Set a timer for the garage door to open or close after a specified duration.
  • Settings: Access various device settings, including:
    • Device Information
    • Tap-to-Run and Automation
    • Device Offline Notification
    • Share Device (with family/friends)
    • FAQ & Feedback
    • Check Device Network
    • Device Update
    • Remove Device
    • Alarm when door is open for some time (e.g., if open for 10 minutes)
    • Close reminder / Open reminder
    • Timeout Alarm
    • Smart Voice (Password only use to Google Assistant)
    • Voice Control
    • Set Password
  • Notifications: Receive alerts on your phone, for example, if the garage door has been open for a long time.
Smartphones showing closed and opened garage door states in the app

The mobile app interface clearly indicates whether the garage door is closed or opened.

6.2. Voice Control with Amazon Alexa

  1. Open the Alexa App, tap on the menu on the upper left corner. Go to Skills & Games.
  2. Enter "Tuya Smart" or "Smart Life" in the search field and search.
  3. Tap "Tuya Smart" or "Smart Life" and Enable the skill.
  4. Enter your account information and tap on "Log in" to link your account to your Amazon account. If your account is a phone number, you should select your country. If your account is an email address, please select a random country/region code.

Voice Commands:

  • "Alexa, Open [device name]"
  • "Alexa, Close [device name]"
  • "Alexa, Is [device name] open?"

6.3. Voice Control with Google Home

  1. Open the Google Home app, tap the menu icon. Tap Home control.
  2. Under Devices, tap the "+" icon.
  3. Tap "Tuya Smart" or "Smart Life".
  4. Enter your account information and tap on "Log in" to link your account to your Google account. If your account is a phone number, you should select your country. If your account is an email address, please select a random country/region code.

Voice Commands:

  • "Hey Google, turn on [device name]"
  • "OK Google, turn off [device name]"

Note: When you link with Google Home, you should turn on the voice control switch in the app. Click "Set" button, turn on the voice control switch and set the password for Google Home. When you open Garage by Google Home, Google will ask you to input the PIN code.

7. Maintenance

  • Keep the device clean and free from dust.
  • Periodically check the sensor and its wiring for any damage or misalignment.
  • Ensure the Wi-Fi signal strength is adequate for reliable operation.

8. Troubleshooting

  • Device not connecting to Wi-Fi: Ensure your router is 2.4GHz, the password is correct, and the device is within range. Try restarting your router and the device.
  • Garage door not responding: Check the wiring connections to your garage door opener. Ensure the compatibility test was successful.
  • Sensor not detecting door status: Verify the sensor and magnet are properly aligned and within the 3-15mm gap. Check for any physical obstructions or damage.
  • Voice control not working: Ensure the skill is enabled in Alexa/Google Home, your accounts are linked, and you are using the correct device name and commands.

9. User Tips

  • The initial setup and app pairing are generally straightforward and quick.
  • While the overall installation is easy, take your time with the sensor placement to ensure accurate door status detection. Some users might find sensor installation requires a bit more attention or minor adjustments.
  • Utilize the scheduling feature for routine tasks, like closing the garage door at night.
  • Set up notifications for when the door is left open for extended periods to enhance security.

10. Frequently Asked Questions (FAQ)

Q: Where can I find a list of compatible garage door openers?
A: Compatibility is generally determined by whether your opener has terminals for a wall button. If your opener activates when you short the wall button terminals, it is likely compatible. Please refer to your garage door opener's manual or perform the compatibility test described in Section 5.1.
Q: Can I use this device with a 5GHz Wi-Fi network?
A: No, this device only supports 2.4GHz Wi-Fi networks. If you have a dual-band router, ensure your smartphone is connected to the 2.4GHz network during setup.
Q: What happens if my Wi-Fi goes down?
A: The smart opener requires a Wi-Fi connection for remote control and smart features. If your Wi-Fi is down, you will not be able to control the garage door via the app or voice commands. You can still use your traditional wall button or remote.

11. Warranty and Support

This product comes with a standard manufacturer's warranty. For warranty claims, technical support, or further assistance, please contact your retailer or the WOFEA customer service team through the platform where you purchased the product. Please have your model number (WG-088) and purchase details ready.

© 2023 WOFEA. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.