VIEWI new008

Contents

VIEWI Mini LED Filament Light Bulb User Manual

Model: new008 | Brand: VIEWI

Introduction

This manual provides instructions for the safe and efficient use of your VIEWI Mini LED Filament Light Bulb. Please read this manual thoroughly before installation and operation to ensure proper usage and longevity of your product.

Setup and Installation

  1. Safety First: Before attempting any installation, ensure the power supply to the lamp holder is turned OFF at the main switch or circuit breaker to prevent electrical shock.
  2. Remove Old Bulb: Carefully unscrew and remove the existing light bulb from the lamp holder.
  3. Install LED Bulb: Gently screw the VIEWI Mini LED Filament Light Bulb into the lamp holder until it is secure. Do not overtighten.
Two mini LED filament bulbs, one 12V and one 24V, showing both cool white and warm white illumination.

Figure 1: VIEWI Mini LED Filament Light Bulbs (12V and 24V versions shown).

For detailed visual guidance on installation, you may refer to the official user manual PDF: User Manual (PDF).

Operating Instructions

  1. Turn On Power: Once the bulb is securely installed, turn the power supply back ON at the main switch or circuit breaker.
  2. Activate Light: Use the light switch to turn the bulb ON.

Video: Product showcase and voltage testing. This video demonstrates the physical attributes of the LED bulbs and showcases their functionality when powered on, including voltage tests for 12V and 24V models.

The VIEWI Mini LED Filament Light Bulbs are available in various voltage options (12V, 24V, 220V) and emitting colors (White, Warm White). Ensure you have selected the correct bulb for your fixture's voltage requirements and desired light color.

Maintenance

  • Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • No User-Serviceable Parts: The LED bulb contains no user-serviceable parts. Do not attempt to open or repair the bulb, as this will void any implied warranty and may cause damage or injury.
  • Disposal: Dispose of the bulb according to local electronic waste regulations.

Troubleshooting

  • Bulb Does Not Light Up:
    • Check if the power supply to the fixture is ON.
    • Ensure the bulb is screwed in securely into the lamp holder.
    • Verify that the bulb's voltage (12V, 24V, or 220V) matches the fixture's power supply.
    • Test the bulb in another working fixture if possible.
  • Bulb Flickers:
    • Ensure the bulb is fully screwed in.
    • Check for loose wiring in the fixture or switch.
    • Verify that the power supply is stable and within the bulb's specified voltage range.
    • This bulb is not dimmable. If connected to a dimmer switch, remove the dimmer or replace it with a standard switch.

Specifications

FeatureSpecification
Brand NameVIEWI
Model Numbernew008
Item TypeLED bulbs
LED Bulb TypeCorn bulb
Base TypeE14
Wattage1.5W
Voltage12V, 24V, 220V (AC/DC depending on model)
Power SourceDC (for 12V/24V models), AC (for 220V models)
Luminous Flux200 Lumens (approx.)
Color TemperatureWarm White (<2700K), White (5500K-6000K)
Beam Angle360°
Average Life5000H
LED Chip BrandEpistar
LED Chip Model3014
ShapeGlobe
Dimensions (Diameter x Height)18mm x 51mm
Is Smart DeviceNo
Support DimmerNo
CertificationCE, ROHS
OriginMainland China
Diagram showing the dimensions of the mini LED filament bulb: 18mm diameter and 51mm length.

Figure 2: Bulb Dimensions.

User Tips

  • Always verify the voltage of your fixture before installing the bulb to ensure compatibility (12V, 24V, or 220V).
  • Handle the bulbs with care during installation to avoid damage to the filament or glass.
  • These bulbs are not dimmable. Using them with a dimmer switch may cause flickering or damage.

Warranty and Support

For any issues, questions, or support needs regarding your VIEWI Mini LED Filament Light Bulb, please contact the seller directly through your purchase platform. Please have your order details and model number (new008) ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.