YSRSAI YSR-CGD-RGB

Contents

User Manual: BanlanX 24V CCT IC Running Water COB LED Strip Light

Model: YSR-CGD-RGB | Brand: YSRSAI

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your BanlanX 24V CCT IC Running Water COB LED Strip Light. Please read this manual carefully before use to ensure proper functionality and safety.

The BanlanX LED Strip Light is designed to enhance spatial aesthetics with its energy-efficient, high-brightness, and safe lighting features. It offers tunable color temperature and dynamic effects, controllable via a mobile app or RF remote.

2. Safety Warnings

  • ATTENTION: Not suitable for children under three years of age.
  • Ensure the LED strip voltage matches the power supply voltage to prevent damage.
  • Verify correct polarity connection (positive/negative terminals not reversed) during installation.
  • Confirm adequate power supply capacity for the length of the LED strip being used.
  • Do not expose the non-waterproof (IP20) LED strip to moisture or water.

3. Package Contents

The "SP637E RB2+RC2 Full Set" package typically includes:

  • SP637E Controller
  • RB2 Remote Control
  • RC2 Remote Control
  • 24V CCT LED Strip (length varies by model: 5M, 10M, or 20M)
  • 24V Power Supply (wattage varies based on strip length)

Please inspect the product for completeness upon unpacking.

BanlanX LED Strip Light Kit Components
Figure 1: Overview of the BanlanX LED Strip Light kit components including the strip, controller, power supply, and remote controls.

4. Specifications

4.1 SP637E Smart LED SPI Controller

ParameterValue
Operating VoltageDC 5-24V
Output Channel≤ 600 Pixel ICs (2CH single signal)
Output CurrentTotal Max: ≤ 12A
Output Power5V < 60W; 12V < 144W; 24V < 288W
Static Power Consumption< 1W
Output SignalConstant voltage @ SPI
Suitable forLED Addressable CCT (Dual Color) Strip Lights
Control MethodBluetooth (mobile app); RF 2.4Ghz remote
DimensionsL56 * W78 * H20mm (2.25in x 2.25in x 0.79in)
MaterialPlastic shell
Working Temperature-10°C to 60°C
IC Count600
SP637E Controller Dimensions and Ports
Figure 2: SP637E Controller with dimensions and dual power input ports (DC input port size: 5.5x2.1mm) and V+/DAT/GND output terminals.

4.2 RF 2.4G Remote Control

  • Utilizes 2.4GHz wireless technology for low power consumption, long transmission distance, strong anti-interference, and fast speed.
  • Capacitive touch IC for high sensitivity and reliability.
  • Supports one-to-many control (one remote controls multiple controllers).
  • Supports multi-to-one control (each controller binds up to 5 remotes).
  • Supports unified control and 4-partition controls.
  • Control distance: visual range < 30M.
  • Requires CR2032 button battery (not included).
RB2 and RC2 Remote Controls
Figure 3: RB2 and RC2 2.4G touch remote controls (sold separately).

4.3 COB CCT LED Strip

ParameterValue
Product Name16703 IC 2 IN 1 CCT Horse Race Led Strip
LED TypeCOB LED Diodes
LED Quantity576 LEDs/Meter
PCB Width10mm
Max Power10W/Meter (Warm White), 10W/Meter (Cool White), 10W/Meter (Natural White)
Working VoltageDC 24V
ColorCCT (Warm White to Natural White to Cool White adjustable)
Color Temperature2700K-6500K
IP RateIP20 Non-waterproof
Connector3 Pin Male & Female Connector
IC Quantity12pcs IC per meter, 60pcs IC for 5M
COB CCT LED Strip Product Parameters
Figure 4: Detailed product parameters for the COB CCT LED Strip.
FCOB CCT IC vs SMD LED Comparison
Figure 5: Comparison illustrating the uniform light output of FCOB CCT IC LED strips compared to the dotted appearance of SMD LED strips.

4.4 Power Supply Dimensions

  • 60W Power Supply: 140*50*23mm
  • 200W Power Supply: 180*50*23mm
  • 300W Power Supply: 205*50*23mm

5. Setup and Installation

Follow these steps for proper installation:

  1. Prepare the Surface: Ensure the installation surface is clean, dry, and smooth. The LED strip has double-sided tape for easy installation.
  2. Cut the Strip (if necessary): The LED strip is cuttable every 82.5mm. Only cut along the designated cut marks to avoid damaging the circuit.
  3. Connect the LED Strip to the Controller: Connect the 3-pin male connector of the LED strip to the corresponding female connector on the SP637E controller. Ensure correct polarity (V+, DAT, GND).
  4. Connect Power to the Controller: Connect the 24V power supply to the DC input port (5.5x2.1mm) on the SP637E controller. Alternatively, use the dual power input ports (V- and V+ terminals) if your power supply uses bare wires.
  5. Power On: Plug the power supply into a suitable electrical outlet.
Wiring Diagram for SP637E Controller and LED Strip
Figure 6: Wiring diagram showing connection from power supply to SP637E controller and then to the LED light strip.
LED Strip Features: Bendable, Cuttable, Double-sided Tape
Figure 7: Visual representation of the LED strip's bendable nature, cuttable sections (every 82.5mm), and integrated double-sided tape for easy installation.

6. Operation

The BanlanX LED Strip Light can be controlled via a mobile application (BanlanX) or the included 2.4G RF remote controls (RB2 and RC2).

6.1 Mobile App Control (BanlanX)

  1. Download the App: Search for "BanlanX" in the App Store (iOS 10.0 or higher) or Google Play Store (Android 4.4 or higher), or scan the QR code provided on the controller.
    SP637E Instructions with QR Code
    Figure 8: SP637E Controller instructions showing the QR code for app download.
  2. Add Device: Open the BanlanX app. Click the '+' icon in the top right corner of the home page to add your SP637E controller.
  3. Control Functions: Once connected, you can access various control pages:
    • Dynamic: Control running water effects and other dynamic lighting patterns.
    • Static: Set static colors and brightness.
    • Music: Synchronize lighting effects with music captured through your phone's microphone or player streamer.
    • DIY: Create custom lighting effects.
    • Settings: Modify device name, set timings, adjust on/off effects, and perform OTA firmware upgrades.
    BanlanX App Control Pages
    Figure 9: Examples of the five major control pages within the BanlanX mobile application: Dynamic, Static, Music, DIY, and Setting.

6.2 RF 2.4G Remote Control

The RB2 and RC2 2.4G touch remote controls can be used to operate the LED strip. These remotes support one-to-many control (one remote controlling multiple controllers) and multi-to-one control (each controller binding up to 5 remotes). They also support unified control and 4-zone partition control.

  • Power On/Off: Use the dedicated ON/OFF buttons.
  • Color Temperature Adjustment: Use the color wheel or dedicated buttons to adjust the color temperature from warm white (2700K) to cool white (6500K).
  • Brightness Adjustment: Adjust the brightness levels.
  • Dynamic Effects: Select from various dynamic effects.
  • Zone Control: If configured, use the zone buttons (1, 2, 3, 4) to control specific areas of your lighting setup.
Remote Control Color Temperature Adjustment
Figure 10: Demonstrates adjusting color temperature using the remote control, transitioning between warm white and cool white.
Tunable Color Temperature Examples
Figure 11: Visual examples of tunable color temperatures from 2700K (Warm White) to 6500K (Cold White) in a living room setting.
Multi-zone Control with RF Remote
Figure 12: Diagram illustrating how the 2.4G RF touch remote control can divide and control lighting in up to four zones within a home.

7. Maintenance

  • Keep the LED strip and controller clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the non-waterproof components to liquids.
  • Regularly check all connections to ensure they are secure.
  • Store the remote controls in a dry place and replace the CR2032 battery as needed.

8. Troubleshooting

  • LED Strip Not Lighting Up:
    • Verify correct polarity connection (positive/negative terminals not reversed) between the strip and controller, and controller and power supply.
    • Confirm adequate power supply capacity for the length of the LED strip. An undersized power supply may not provide enough power.
    • Check if the power supply is properly plugged in and receiving power.
    • Ensure all connectors are securely fastened.
  • Remote Control Not Working:
    • Check and replace the CR2032 battery in the remote control.
    • Ensure the remote is within the effective control distance (<30M visual range).
    • Re-pair the remote with the controller if necessary (refer to "2.4G Touch Remote Control Instructions" for detailed pairing steps, if available).
  • App Control Issues:
    • Ensure Bluetooth is enabled on your mobile device.
    • Verify the BanlanX app is updated to the latest version.
    • Check if the controller is powered on and within Bluetooth range.
    • If using Zigbee-enabled devices, ensure a compatible gateway is properly set up for network connection.
  • Inconsistent Lighting/Effects:
    • Ensure all connections are firm and there are no loose wires.
    • Check for any physical damage to the LED strip.

9. User Tips

  • When selecting a power supply, ensure its wattage is sufficient for the total length of the LED strip you are using. For example, a 20-meter strip will require a higher wattage power supply than a 5-meter strip.
  • The remote control provides reliable operation, even if you haven't explored the mobile app features yet.

10. Frequently Asked Questions (FAQ)

Q: What is the power consumption per meter?
A: The maximum power consumption for the COB CCT LED Strip is 10W per meter for each color (Warm White, Cool White, Natural White).
Q: Does this product support Zigbee?
A: ZIGBEE-enabled devices require a compatible gateway for network setup. The primary control methods are Bluetooth (app) and 2.4G RF remote.
Q: Can I get lighting above 12W per meter?
A: The specified maximum power for this COB CCT LED Strip is 10W per meter. Please refer to the specifications for detailed power ratings.

11. Warranty and Support

For warranty information and technical support, please refer to the seller's policies or contact the seller directly through the platform where the product was purchased. Keep your purchase receipt as proof of purchase.

A PDF version of the user manual is available for download: User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.